Gas boiler Siberia 17: device, technical characteristics, as well as reviews and operating instructions

Model overview

Siberia17К

Floor installation. Simple design. Minimum functions. Having found out how much the 17 K modification costs, as well as technical parameters, consumers willingly purchase it. Two circuits. Heating capacity 17.4 kW. Heats an area up to 200 square meters. Efficiency 90%. Open combustion chamber. Fuel consumption – 1.21 kg/h and 1.76 m3/h – liquefied and natural gas, respectively. Mechanical control type. Protection – gas control. Weighs 59 kg. Width 28 cm. Height and depth are standard for Siberia - 85 and 56 cm, respectively.

Siberia KCHGO-25

Single-circuit floor-standing convection boiler. Heating of an area up to 270 sq. m. Estimated price 37,700 rubles. 25,000 W – heat output. Cast iron heat exchanger. 2.45 m3/h of natural gas. Mechanically controlled. Gas control. 115 kg – weight.

AOGV-17.4

Floor installation. Does not respond to pressure changes in gas pipes. Non-volatile. Thermal insulator with basalt fiber. Auto control. Steel radiator. Heats up to 180 sq. m. SIT. Equipped with a magnetic valve that resists contamination. Piezo ignition.

TopLine 24

Wall-mounted version. Copper heat exchanger. Capacity 12 l/min at 25 °C - it decreases with increasing temperature. Depending on the power of the device, you can heat an area of 30-200 square meters.

AOGV 11.6

Budget modification. Approximate price – 10,000 rubles. One circuit. 11.6 kW – heat output. Efficiency – 87%. Floor installation. No auto-ignition. Open camera. Non-energy independent, like all Siberia gas devices.

How to enable: brief instructions

Identification of boiler control elements.
All floor-standing models are equipped with the well-known EuroSit 630 automation system, so to turn on the boiler you should follow a simple algorithm:

Make sure that the gas supply valve is open and there is draft in the combustion chamber (put a match to the window at the bottom of the boiler).
Turn the mechanical thermostat (rotator) to the “Off-0” position, and then all the way to the “” position.
Press and hold the magnetic valve button (the start button in the center of the thermostat) for 30 seconds, then press the piezo ignition button near the thermostat once without releasing the start button. At this moment the pilot burner should light up; if this does not happen, repeat the steps. If the wick burns steadily, continue to hold the trigger button for 60 seconds before releasing it.
Rotate the thermostat to set the desired temperature value.

Types of Siberia boilers

We have already said that Siberia boilers are presented in a wide range of models. Therefore, it will be easy for you to choose the most convenient option for you.

First of all, Siberia boilers are divided into types according to production series. It is these parameters that mainly divide such devices according to different characteristics.

Siberika boiler series:

Economy;
Comfort;
Premium

Siberia Economy boilers began appearing in 2005. Such devices have low cost and excellent characteristics. Their main advantage is the ability to use liquefied gas in emergency situations. This line includes boilers with one and two circuits. The presence of a two-circuit system is indicated by the letter “K”.

Double-circuit boilers Siberia economy:

11K has a power of 11.6 kW;
17K has a power of 17.4 kW.

Siberia boilers are compact in size, so they do not require much space.
The Comfort Series has a wide range of models. They can also have one or two circuits and can heat 8 liters of water per minute.

Siberia Premium boilers:

The number in the boiler brand indicates their power. The comfort series is the most popular.

Siberia Premium is a dual-circuit device with an efficiency of 90%. They have exhaust gas control and effective scale protection.

Specifications ↑

Features of this brand at the moment

The manufacturer itself positions itself as a competitor to Slovenian gas units “Proterm”. This can be seen in some design and technological solutions, as well as in the adopted standard outlet openings for various purposes. Siberia, of course, generally loses to Proterm in power, build quality and efficiency, but very seriously all the “disadvantages” are covered by an affordable and more than acceptable price.

Due to the desire to comply with foreign analogues and the best domestic representatives of gas boiler equipment, the implementation of technical and design innovations has led to very great difficulty in setting up the boiler. That is, if previously any user could adjust the equipment to suit himself, now only a specialist can do this. True, we must pay tribute that after high-quality tuning, the boiler noticeably reduces energy consumption, while leaving thermal indicators unchanged. It should also be noted that another, to a certain extent, weak point of the Siberia boilers is the automation, or rather, some of the sensors included in its composition. This applies to:

draft sensor (this is a problem with all domestic boilers);
flame cutoff sensor (an unconfigured pilot burner often cuts off the pilot flame when the wind is strong enough, but the sensor does not manifest itself in any way and gas continues to flow to the burner.

In Fig. samples of Rostov heating equipment products are presented below, you can familiarize yourself with the technical characteristics of its basic model:

The Siberia boiler is presented below, compare the technical characteristics

TOP 5 energy-independent gas boilers

Non-volatile boilers are a good choice for working in remote villages or regions with overloaded and dilapidated electrical networks. They continue to work in the event of a sudden power outage and do not require high costs for repairs or replacement of failed components. Let's look at the most popular models:

Lemax Patriot-12.5 12.5 kW

Single-circuit parapet gas boiler. Equipped with openings in the housing that allow heated air to escape outside.

This makes the boiler itself similar to a convector, heating the room without the need to install radiators. The boiler power is 12.5 kW, which is suitable for rooms of 125 sq. m.

Its parameters:

installation type - floor;
energy consumption - independent;
Efficiency - 87%;
gas consumption - 0.75 m3/hour;
dimensions - 595x740x360 mm;
weight - 50 kg.

Advantages:

simplicity of design, reliability;
low fuel consumption;
easy controls;
low price.

Flaws:

there is no complete information about the condition of the unit components. There is only a pressure gauge. indicating gas pressure;
it is necessary to install a traditional type chimney.

Domestic boilers are optimal for Russian climatic and technological conditions. They are unpretentious and reliable, do not require expensive repairs or maintenance.

Lemax Leader-25 25 kW

Convection gas boiler with a power of 25 kW. Designed for use in rooms up to 250 sq.m. The unit is single-circuit, with a cast iron heat exchanger and mechanical control.

Its parameters:

installation type - floor;
energy consumption - independent;
Efficiency - 90%;
gas consumption - 1.5 m3/hour;
dimensions - 515x856x515 mm;
weight - 115 kg.

Advantages:

strength, reliability of design;
stability, smooth operation;
Italian components.

Flaws:

large weight and size;
Some users find the ignition procedure unnecessarily complicated.

Boilers with a cast iron heat exchanger are characterized by smooth operation and the absence of sudden temperature changes.

Lemax Leader-35 35 kW

Another domestic boiler designed for large rooms. With a power of 35 kW, it is capable of heating an area of up to 350 sq.m., which is suitable for a large house or public space.

Boiler parameters:

installation type - floor;
energy consumption - independent;
Efficiency - 90%;
gas consumption - 4 m3/hour;
dimensions - 600x856x520 mm;
weight - 140 kg.

Advantages:

high power, ability to heat a large room;
stable and efficient work;
double-circuit boiler provides heat and hot water at the same time.

Flaws:

large size and weight, requiring a separate room;
gas consumption is quite high.

High-power boilers are often used to heat several apartments or houses. This reduces the financial burden on homeowners, since fuel payments are shared equally by everyone.

MORA-TOP SA 20 G 15 kW

Gas convection boiler manufactured by Czech engineers. The power of the unit is 15 kW, suitable for work in a house with an area of up to 150 sq.m.

Main parameters:

installation type - floor;
energy consumption - independent;
Efficiency - 92%;
gas consumption - 1.6 m3/hour;
dimensions - 365x845x525 mm;
weight - 99 kg.

Advantages:

independence from electricity supply;
stability of work;
The power is suitable for most medium-sized private houses.

Flaws:

an atmospheric burner requires a normal chimney and does not allow drafts in the room;
relatively high price.

Compared to their Russian counterparts, European boilers are noticeably more expensive. Users note excessive costs, as well as interruptions in the supply of spare parts.

Siberia 11 11.6 kW

Domestic single-circuit gas boiler. Suitable for small rooms up to 125 sq.m. This is due to the boiler power of 11.6 kW.

Specifications:

installation type - floor;
energy consumption - independent;
Efficiency - 90%;
gas consumption - 1.18 m3/hour;
dimensions - 280x850x560 mm;
weight - 52 kg.

Advantages:

stable work;
unpretentious, economical boiler. Fuel consumption is noticeably lower than that of analogues from other manufacturers;
ease of management and maintenance;
relatively low price.

Flaws:

the declared indicators cannot always be achieved, the boiler power is sometimes not enough;
Difficult and inconvenient ignition.

Non-volatile boilers are optimal in Russian conditions. In cold weather it is too dangerous to remain without heating, so the independence of boilers is highly valued by users.

Main advantages

According to the manufacturer, Siberia gas floor-standing boilers are a new generation of heating units designed to provide heating and hot water supply to the home. Compared to imported competitors, boilers of this brand have the following advantages:

A wide range of models that can satisfy any consumer demand.
Automated control system, which ensures ease and safety of use.
Economical.
Trouble-free operation even in the harshest operating conditions.
Availability of service support.
Affordable price.

Now, analyze each point of the above advantages in more detail, because only the reliability of the facts will allow the domestic consumer to consider the equipment of this brand as a candidate for purchase.

Floor-standing gas boiler Siberia 11 single-circuit

Gas floor-standing boiler Rostovgazoapparat Siberia 11 is a single-circuit energy-independent boiler produced by the Rostov Gas Equipment Plant. The boiler is intended for heating only. Open combustion chamber with natural smoke removal. Piezo ignition. Italian EUROSIT automation unit, Polidoro burner, thermometer on the front panel. Operates on natural gas (to operate on liquefied gas, replacement of nozzles is required). Operable at reduced gas pressure. Power 11 kW. However, it is also possible to obtain domestic hot water using a single-circuit boiler. To do this, you need to connect an indirect heating boiler to the heating system. It is there that the water is heated to the required temperature. The result is a compact, convenient and very economical system that does not require an additional source of energy (for example, electricity), but operates directly from the heating boiler.

Recently, Siberia gas boilers are gaining more and more popularity and respect among... Show more

Recently, Siberia gas boilers have been gaining increasing popularity and respect among consumers. This is facilitated by the presence of such significant advantages as:

14. Thoughtful development taking into account the harsh climate conditions of our country and the characteristics of gas and water supply, an ideal ratio of quality and price.

Structure of a floor-standing boiler The device consists of the following main parts: heat exchanger, cover, gas exhaust device, walls, pilot burner, main burner, frame, gas block. The automation of the Siberia boiler provides: stabilization of the gas pressure on the main burner, maintenance of the set water temperature, turning on the main burner when there is a flame on the ignition burner, turning off the device when the ignition burner goes out, in the absence of vacuum in the chimney.

Design of the Siberia apparatus:

1 gas outlet; 9 ignition burner (pilot burner), 2 heat exchanger; 10 thermometer; 3 main burner; 11 cover; 4 gas valve; 12 side wall left / right; 5 cover with piezo ignition; 13 panel; 6 thermocouple; 14 anterior wall; 7 traction sensor; 15 frame; 8 thermal breaker; 16 thermostat indicator knob (magnetic valve button). Technical characteristics of gas floor-standing boilers Siberia

Model	11	11K	17	17K	23	23K	29	29K	35
Rated thermal power, kW	11,6	11,6	17,4	17,4	23,2	23,2	29	29	35
Reduced gas consumption
natural, m3/h	1,18	1,18	1,76	1,76	2,3	2,3	2,94	2,94	3,75
liquefied, kg/h	1	1	1,21	1,21
Approximate heating area, m2	up to 125	up to 125	100–200	100–200	100–250	100–250	150–300	150–300	150–400
Flue gas efficiency, %, not less	90	90	90	90	90	90	90	90	90
Water temperature setting limit, °C	90±5	90±5	90±5	90±5	90±5	90±5	90±5	90±5	90±5
Water consumption in hot water supply mode. when heated at Δt=35°C, l/min	3,8	5,5	7	8
Connecting thread of fittings, inch
for gas supply	G½	G½	G¾	G¾	G¾	G¾	G¾	G¾	G¾
Inlet/outlet
to the heating part	G1½	G1½	G2	G2	G2	G2	G2	G2	G2
to the water heater parts	G½	G½	G½	G½
Internal diameter of the gas outlet pipe, dm, not less	1,25	1,25	1,25	1,25	1,38	1,38	1,38	1,38	1,38
Overall dimensions, mm
height	850	850	850	850	850	850	850	850	850
width	280	280	280	280	380	380	380	380	380
depth	560	560	560	560	560	560	560	560	560
Weight, kg	52	56	56	59	65	70	70	76

Start-up and operating instructions

The launch is carried out after connecting communications and checking the tightness of all connections.

Needs to be attached:

Heating circuit forward and return pipelines.
Gas pipeline.
Make-up pipeline.
Chimney.

After connecting the communications, the system is filled with water until it flows out of the signal pipe.

Then open the gas valve, press the pointer handle (all the way) and at the same time press the piezo ignition button of the pilot burner . You must hold it for up to 1 minute until a flame appears on the pilot burner.

After this, the pointer knob is set to position 4, the main burner lights up and the boiler begins to function.

Operation of the units involves periodically cleaning them from dust and soot, changing the current temperature settings as desired, and monitoring the general condition of the system.

If unusual or alarming signs appear, turn off the gas valve and immediately call a technician from the service center to inspect and repair (adjust) the device.

Any independent intervention in the mechanism can cause an accident and failure of the equipment..

Localization and translation problems

The game was released simultaneously in English and French.

In Russia, in other CIS and Baltic countries, the game was published by 1C under the name “Siberia”

. This name is not a completely correct translation of the original name - "Syberia" - since the name of the game did not refer to the region of Siberia, but to the mythical island of Siberia, where mammoths live (the region of Siberia itself is called "Siberia" in English). However, the publishers considered the name “Siberia” to be more harmonious and suitable for the Russian market.

The game has been localized. The following actors took part in the dubbing: Lada Mosharova (Kate Walker), Nadezhda Podyapolskaya (Momo), Alexander Bykov (Oscar, Dan), Dmitry Nazarov (hotel owner, rector of Barrokstadt University, captain Malatesta, Boris Sharov), Alexander Kotov (Marson, Hans Voralberg), Alexey Kolgan, Ivan Litvinov, Natalia Litvinova, Nina Luneva, Yuri Naumenko.

Console versions (PlayStation 2 and Xbox) do not have official localization.

There are several Russifications - both official and pirated. The quality of the translation of each of them was subject to justified criticism. The most common complaints converged on criticism of the translation authors’ ignorance of the cultural allusions of the work, and the approach to the Syberia text as an ordinary game text that does not require special knowledge from the translator.

In this article, proper names are given in accordance with the official Russification from (the original name is indicated in brackets).

On February 11, 2015, the game was published for iOS by "".

How to choose a gas boiler

First you need to decide on its power. The larger the room, the more power the speaker will need.

For every 10 sq. m. needs 1 kW of energy. In order for the device to work longer, you should not purchase it one-on-one with the calculated power

It is better to take with a reserve of 1/3.

It is important to take into account climatic conditions, as well as the decoration of the house. If the house is insulated, then heat loss will be less. Accordingly, a less powerful boiler will do

Accordingly, a less powerful boiler will do.

You also need to take into account what it is needed for. Only for heating or for the availability of hot water.

If the equipment will be installed in an apartment, it is recommended to use a wall-mounted speaker, and if in a house, then it is better to use a floor-standing speaker. But it still depends on preferences, and, of course, on the size of the heated area.

For long-term operation, the type of heat exchanger is important. If it is cast iron, then this is only a guarantee of durability.

Wall-mounted boilers Siberia

The mounted gas boiler is designed for heating water in heating and hot water systems. Its capacity is from 7 to 12 l/m.

The main feature is its small size. There are two types of wall-mounted boilers:

With an open combustion chamber;
With a closed combustion chamber - makes it possible to reduce heat loss.

Its type is indicated by the presence or absence of the letter “C” in the marking. If this letter is present, then the combustion chamber is sealed and a coaxial chimney is needed here.

The combustion process is controlled smoothly using an automatic system manufactured by Eurosite and Honeywell

Equipment of the wall-mounted boiler Siberia Top Line 24

The copper heat exchanger is supplied by French supplier Gianoni. The bithermic design kit combines two heat exchangers: a heating circuit and a DHW circuit.
The American company Honeywell
is a supplier of gas automation. The external control element includes: a magnetic valve, a thermal regulator and an element that stabilizes the gas pressure on the burner;
Soft ignition function by piezoelectric element;
Ionization flame control sensor;
Gas filter equipment;
Heat-resistant burner Made in Italy made of high-alloy stainless steel from the supplier Polidoro equipped with electronic modulation, which allows smooth adjustment of the flame combustion value to the specified parameters of the consumer;
The anti-blocking circulation pump is supplied by the German company Grundfos;
Diaphragm expansion internal tank from the European company Zilmet;
Possibility of connecting a temperature sensor located in the room via a switch;
Temperature adjustments for the heating system and domestic hot water are made separately from each other;
Moderate heating during the cold period using the “anti-freeze” function, preventing the heating system from defrosting;
The Siberia boiler is equipped with a liquid crystal screen;

Specifications

They have two circuits;
Efficiency 90%;
The heat exchanger is made of copper;
Coolant temperature maximum 80°;
Consumes electricity 85, 130 W/hour.

Operating principle of wall-mounted boilers

Gas automatics.
The burners are made of stainless steel, which are produced by such manufacturers as Polidoro, Worgaz.
The combustion process is controlled smoothly using an automatic system manufactured by Eurosite and Honeywell. Thanks to an imported manufacturer, the heater lasts for a long time, despite frequent pressure changes.
Energy control.
Since the boiler operates using electricity, for safety, in case of a power outage, it contains a circulation pump, a controller, and also has a system for self-diagnosis of possible faults. The point is to stop the gas supply in unusual situations.
Heat exchanger.
Heat loss is minimal. This is justified by the fact that it is insulated with thermal insulation, and its design is unique and patented.

Device

The main design elements of the Siberia 17 gas boiler are an open type burner combined with a steel heat exchanger.

Together they perform the main task - heat the coolant . At the exit from the heat exchanger, the liquid enters a three-way valve, where the colder “return” is mixed into the hot flow to obtain the desired temperature.

The prepared coolant flows by gravity into the heating circuit.

Water moves under the influence of convection currents, moving hot layers up and cold layers down.

Taking this into account, the system must be installed in compliance with the standard slope, ensuring coolant circulation.

If this is not possible, it is necessary to connect an external circulation pump, which will ensure more active flow movement. However, in this case, the energy independence of the boiler ceases.

Smoke removal also occurs naturally, using stove-type drafts. This is an important and crucial point, since weak draft will cause smoke in the premises and the impossibility of operating the boiler. Proper installation and connection of the chimney will help ensure the necessary conditions.

IMPORTANT!

The connection and first start-up of the boiler must be carried out by employees of the guarantee organization.

Siberia model range

Household heating equipment produced under the Siberia brand has a wide range of models. Today the company offers its consumers the following boilers:

Floor standing boilers with steel heat exchanger. Reliable dual-circuit device with an atmospheric burner.
Single-circuit units with a cast iron heat exchanger of increased power. Ideal for heating a large country house. Some models can be equipped with an indirect heating boiler.
Wall-mounted models are compact and high-performance.

Let's look at the technical characteristics and design features of Siberia boilers in more detail.

Floor equipment

Siberia floor-standing boilers are available in two types:

With steel heat exchanger.
With cast iron heat exchanger.

Models with a steel heat exchanger have an additional copper circuit for connection to the hot water supply system. The automatic control unit (SIT) includes:

magnetic valve;
modulation thermostat;
pressure stabilizer and gas filter;
thermoelectric device with piezo ignition and flame control sensor.

Optimal dimensions and modern design.
Ease of automation control.
Wide range of powers from 11 to 35 kW.
High efficiency – 90%.

For uninterrupted heating of a private home, the Siberia single-circuit boiler with a cast iron heat exchanger is ideal. If there is a heating system with natural circulation, this gas appliance is able to provide heat even when the electricity is turned off.

Increased reliability, simplicity of design and control make such boilers the best option for the Russian outback, where there are problems with electricity and pressure in the gas main. Here are some technical characteristics and advantageous features of units in this series:

Increased power (from 16 to 50 kW) is suitable for heating areas up to 500 m2.
The modern stylish design allows the massive device to look organically in any room.
Quiet operation.
High efficiency.
Durability of the heat exchanger, as well as other parts and components of the boiler S

Wall-mounted devices

The Siberia wall-mounted double-circuit boiler is in high demand among consumers due to its functionality, practicality and reliability. Thanks to its compact dimensions, closed combustion chamber and coaxial chimney, installation of this heating device is possible even in small rooms.

Copper bithermic heat exchanger Gianoni.
Polidoro gas burner made of alloy steel.
Automation based on a Honeywell electronic board produces smooth modulation of the flame on the burner, which allows for rational consumption of energy.
This boiler is equipped with a modern anti-freeze function for the heating system.
Liquid crystal display, which displays current information about the state of the unit and error codes in the event of a malfunction or malfunction of the system.

As you can see, the Rostovgazoapparat company produces modern, reliable Siberia gas appliances, suitable for heating small apartments and country cottages. A dual-circuit unit will allow you not to worry about the availability of hot water for domestic needs. The high quality, simplicity and reliability of equipment from this brand are deservedly appreciated by consumers.

What functions does it have?

The main function of the unit is to heat the coolant for the heating circuit of a private house or other premises.

Additional functions of the boiler are:

Thermometer providing visual control of coolant temperature.
Piezo ignition system.
The presence of a two-stage burner, pilot (pilot) and main.
Availability of gas, flame and draft control.

All components and blocks of the boiler are conveniently located and allow for easy maintenance or repair.

IMPORTANT! It is not recommended to do independent work or repair the unit, especially if the warranty period has not yet expired. You should use the services of technicians from service workshops.

History of creation

The game was announced on December 14, 2001.

In January 2002, the first details appeared, in particular, the plot of the plot. The release date was set for May of the same year.

Benoit Sokal said the following about working on the game script:

Almost everything, from my family history to the news on TV and newspaper articles I read, served as a source of inspiration for me. For example, I was watching a TV show about mammoths and how they disappeared thousands of years ago, and I started researching... I actually did some research that lasted about a year to create the plot and characters for Syberia...

Colleagues confirmed the history of the development of the diology concept:

How to choose a gas boiler

First you need to decide on its power. The larger the room, the more power the speaker will need.

For every 10 sq. m. needs 1 kW of energy. In order for the device to work longer, you should not purchase it one-on-one with the calculated power

It is better to take with a reserve of 1/3.

It is important to take into account climatic conditions, as well as the decoration of the house. If the house is insulated, then heat loss will be less

Accordingly, a less powerful boiler will do.

You also need to take into account what it is needed for. Only for heating or for the availability of hot water.

For long-term operation, the type of heat exchanger is important. If it is cast iron, then this is only a guarantee of durability.

Floor standing boilers Siberia

The peculiarity of such boilers is that their heat exchanger is made of cast iron. This simplifies its operation, since it does not care about water hardness.

Such heaters are single-circuit. And there are also those that have an electric power supply, that is, they are dependent on the mains at approximately 4.4 W/hour.

In terms of power, floor-standing boilers are:

16 kW;
25 kW;
40 kW;
50 kW.

But only those with a power of 16 kW run on regular gas. The water temperature at the outlet is maximum 90°. They are all 86 cm in height.

Width:

16 kW, 25 kW – 57.5 cm;
40 kW, 50 kW – 61 cm.

By depth:

16 kW – 41 cm;
25 kW – 49.5 cm;
40 kW – 66.5 cm;
50 kW – 75 cm.

Thanks to an imported manufacturer, the heater lasts a long time, despite frequent pressure changes

Operation of floor-standing boilers

They are more powerful, which affects their large dimensions. For installation, you will need to prepare a place on the floor and be sure to install a foundation.

Installation rules

You can do the work on connecting the water supply and heating circuit yourself. The connection of the installation to the gas main must be carried out by representatives of the gas industry. And lastly, in order to correctly connect the Siberia floor-standing gas boiler, the manufacturer’s instructions must be followed in full.

Do you know how to determine the consumption of a propane gas boiler? Details about the Buderus 60 kW gas boiler - models and their characteristics https://oteple.com/gazovyj-kotel-buderus-na-60-kvt-modeli-i-ix-xarakteristiki/