Do-it-yourself fireplace log holder 300 photos, step-by-step instructions

firewood holder photo

What could be better than spending a winter evening by the fireplace? The flame will warm you with natural warmth, and the cozy crackling of logs will add comfort and create a unique atmosphere. The only problem is that at some point you will have to go outside to get firewood. And most likely, they will need to be dried first, so it is much more convenient to have a supply of firewood on hand so that it will last at least for the evening.

There is a solution - make a firewood rack for the fireplace with your own hands , it’s not that difficult. Of course, there are two options: buy or make it yourself. You can look at the prices for accessories for fireplaces in the catalogs of online stores, after which you will most likely choose the second option. Now think about what exactly you need - a stationary firewood stand or a portable one, and, of course, how it will fit with the overall design of the room. Here are homemade firewood holders for fireplaces and stoves . There are interesting ideas for racks made from water pipes and simple wooden structures, and no complex projects, everyone can do them all with their own hands.

Style solutions

When purchasing a fireplace, a firewood rack is often included in the set.
This is a very nice bonus, and quite a profitable option, because such components for the fireplace are made in the same style and design. Very often such firewood racks are portable, which is also a big plus. In addition, a fireplace or stove and firewood rack, made in the same style, will look great in the interior; they will add a special zest to it. A vertical mini firewood rack will look very stylish and tasteful. It will become not only a stand for storing firewood, but also an excellent addition to your cozy home. It will look ideal next to the fireplace or stove.

When choosing forged firewood racks, you can choose not only intricate and openwork options, but also those made in the style of minimalism. The main thing is that all firewood racks made of metal will be a very good solution for your country house. Not only based on aesthetic needs, but also on safety grounds.

An unusual solution could be to choose different abstract firewood racks for your home. For example, a wooden firewood rack in the shape of a Christmas tree will look very interesting. Most manufacturers of fireplaces, stoves and accessories offer a huge range of different firewood holders. For every picky taste. You can definitely choose what you need. And if you want to make your own individual design, you can easily try to make a firewood rack with your own hands.

Very often fireplaces already have “built-in firewood holders”. Places for storing firewood. With this option, additional firewood is most often not needed. If you are planning to build a fireplace yourself, then it is quite possible to make a place to store firewood in its lower part.

Recommendations for selection

A log burner for a fireplace or stove is chosen based on the style of the house. A wrought-iron firewood rack with a fancy antique shape will fit well into a living room decorated in a classic style. A living room in a rustic style (Provence, country) requires naturalness and simplicity, so a firewood rack made of wood or rattan will look decent here. If you choose modern style to decorate your living room, give preference to a metal model with chrome parts. When comparing different options, consider the following factors:

• Intensity of use . Knowing how often you light a fire and how much wood you use per evening will help you decide on the size.

Loft style Source pinterest.com

Kinds

The firewood storage stand can be stationary or portable. A special firewood shed is built outside, in which the entire supply for the winter is stored, and a smaller portion is brought into the room. To fire stoves, not only firewood is used, but also special long-burning artificial briquettes or pellets.

When laying out a fireplace with a classic shape or in a country style, you can lay out a special niche in which you can then store fuel. A fireplace bench with a recess or shelf is also an excellent solution for storing fuel. The size of the portable firewood rack is selected so that it is comfortable and easy to carry. Stationary storage structures are heavier and can hold more firewood.

Firewood boxes can be made of brick, stone, metal, solid wood, plywood, cord, glass, and combinations thereof. They can be decorated with various decorative elements and decorations. Stores sell ready-made fireplace kits, which include firewood holders and other necessary accessories. This set can be easily made with your own hands. Among the additional parts for fireplaces there are also ceramic firewood, but it is strictly forbidden to burn with them - they perform a purely decorative function.

A forged firewood box with a metal bottom is very popular: it can be combined with fireplaces of any style, can have different shapes and designs, has significant weight and looks attractive in the interior with or without firewood. To reduce the weight of the structure, sometimes they make a holder without a solid bottom, but only with a grate. Its disadvantage is that dust and sawdust will fall directly onto the floor.

A firewood carrier woven from thick non-flammable cord or knitted looks original and homely. You can also sew it from thick fabric, for example, thick drape with a suitable texture. Baskets and boxes woven from wicker, rattan or artificial materials are also popular. Numerous manufacturers offer branded luxury holders made from non-standard expensive materials, for example, tempered glass and chrome-plated steel in a high-tech style.

Wooden fuel boxes made of oak or plywood, coated with varnish or paint, are perfect for country houses and rustic-style interiors. Any box or bucket, if desired and with minimal skills, can be turned into a vintage or modern log holder, decorating it to your liking. You can also buy or assemble racks or shelves from boards or light beams with your own hands, place them in a corner or attach them to the wall.

Metal rack

A metal firewood box is an open place for storing fuel. When positioned correctly, such an item becomes a full-fledged element of the interior and adds originality to it. It won’t be easy to make a metal firewood rack yourself; it’s easier to buy a finished product in a store or have it made to order. There are many interesting solutions on the market for any type of interior decoration.

Firewood in the rack Source gefest.od.ua

Firewood for a bath: what is the difference?

It would seem that it will also stand on the street - how does this design differ from an ordinary firewood box? Let's figure it out.

Unlike traditional storage, the sauna structure is always smaller and is built next to the entrance to the steam room.

Building some kind of massive barn is completely pointless. You simply build a local shed and put in it the amount of firewood needed for 2-3 fires. A wall canopy is the simplest and most affordable way of arrangement. The approximate number of logs is at the level of human height, but the length can be different and directly depends on the length of the bathhouse itself.

To mark the corners, thick bars or metal rods are driven into the ground. The sides are filled with slats and boards. You can also secure the chain link. Sometimes even two corners are enough - the rest will be replaced by a wall.

Once the walls are ready, you can begin building the floors. In this case, it is also better to make the roof pitched to ensure uniform drainage of water after rain. We lay construction pallets on the bottom or assemble lathing. Our firewood will be placed on it!

Firewood at the bathhouse

Proper storage of firewood is the key to your safety, a good indicator of housekeeping and decoration of your home or site. Firewood racks look especially great in homes. They create comfort, are able to emphasize the individuality of the interior, and ensure order and cleanliness.

23e96d03d0c83cea9ea54ce7d296d8f8.jpe

Useful information about outdoor firewood burners

We found out what a firewood rack for a fireplace with your own hands looks like, what projects exist. Now it will be doubly pleasant for you to sit by the fireplace. But that's not all! When it is necessary to organize the storage of a large amount of firewood, a full-fledged firewood shed is built at your dacha. Thanks to it, the products will be reliably protected from precipitation and the negative effects of moisture. The space will be well ventilated, and access to firewood will be significantly simplified.

Street woodcutter

A typical outdoor firewood shed is somewhat reminiscent of its own shed on the property. However, with a little effort, you will end up with a magnificent woodpile that is completely different from anything created before.

• Selecting a location, preparing a columnar base. You will need to choose a perfectly level place. A slight slope is permissible only when there is a need to ensure uniform drainage of melt or rainwater.
• Having drawn the perimeter, not very deep holes are dug in the corners. The base is iron pillars, logs, bars. A cushion of crushed stone and sand is built at the bottom of the holes, and after installing the base, everything is filled with concrete mortar.
• Frame design, wall construction. To make carrying firewood as simple as possible, you need to tie the bottom and top of the structure. The existing diagonals will make the structure more stable.

Important! If metal rather than wood is used as the base, corners are welded onto the pillars. You can also use them for diagonals.

• The wall material is attached to the frame - for example, lining or planks. It is undesirable to make the walls solid because ventilation will suffer. Always leave at least small gaps. Chain-link mesh is also suitable if you are working with metal. It is best to cover with slate.
• Roof arrangement. It is advisable to make it lean-to, ensuring a good flow of water back. To achieve this effect, you need to make base bars of different lengths. In addition to slate, as shown in the photo, corrugated sheets and roofing felt, as well as metal tiles, are widely used.
• Bottom preparation, final stage. In principle, the structure is ready for use - you can bring in firewood and carefully stack it in the woodshed. Only one question remains open - the basis. A tree is a tree, and its contact with the ground is undesirable. Construction pallets are quite suitable as a layer. If there are no pallets at hand, you can use any other materials. For example, weld a grid from reinforcement.

Many owners complain: the firewood box is ready, it’s made to last, but for some reason the firewood in it doesn’t want to hold on and falls. What could be the problem? Don’t chase beauty and don’t make it an end in itself to lay out firewood in the shape of some animal or bird. Simply stack the logs one on top of the other, leaving a minimum of free space between them. If they differ in size, the larger logs are stacked first. The trend is simple: the thinner the wood, the higher it needs to be stacked.

The outdoor woodshed can be either wall-mounted or a separate structure

Woodcutter on the street (video)

Main types

A firewood stand located near the stove or fireplace is called a firewood rack. It performs two functions at once: it is a device for direct storage of firewood and a decorative piece of furniture. Usually there are a couple of stacks of firewood by the fireplace or next to it, allowing you to calmly light a fire and lightly heat the room; this is quite enough. A dry log burns well, but wood brought from the street is not always ready for this.

Conventionally, all devices for storing timber can be divided into the following types:

• Street options. To store firewood outdoors, small structures in the form of sheds are most often built. These sheds protect the forest from precipitation, and at the same time give it the opportunity to ventilate and dry out, since there are cracks in the walls of the structures. In addition, the wood is not placed on the ground or floor, but on a prepared base that prevents moisture from getting on the firewood. In some cases, the woodpile is made in the form of a canopy, which is fixed to poles. The canopy protects the firewood from precipitation, and the absence of walls allows the firewood to dry from the wind.
• Room solutions: stationary and portable. It is not possible to fully store firewood in the house due to limited space. You can organize a small storage area under the stairs, but it is better not to take up precious space with wood. Most often, next to the stove or fireplace there is an improvised woodshed for a small amount of firewood with which you can light a fire and heat the room. This firewood box can be part of the stove itself, there can be a fireplace with a firewood box on the side or with a stand inside, a small storage can be made in the form of a shelf for firewood on the wall. The firewood holder for the fireplace can be placed separately and look like a full-fledged decorative accessory. In stores you can find options made of wood, metal and plastic; beautiful forging is often used. The simplest may be a portable option, for example, an ordinary wicker basket, with which you can easily go to the barn to replenish your supply of firewood.

Set of forged accessories for the stove

You can make a woodshed for firewood yourself, or you can buy a ready-made version in a specialized store, matching it to the interior of the entire room. Typically, such devices are made of either wood or metal, although plastic structures are also found.

The dry and warm microclimate of the house allows the firewood to be always ready for use. However, when bringing another stack of firewood from the street, you should often dry it a little so as not to start a fire with damp logs. Stationary solutions are great for this, when the firewood for the fireplace is located in close proximity to it.

For example, you can make a niche right in the wall next to the stove into which you can load wood for storage and drying. If the size of the stove or fireplace is large, you can consider the option of having a niche right in it. Typically, such a niche is located at the bottom of the fireplace or stove, conceived even before laying, in the process of developing the appearance of the entire structure.

Wood storage space at the base of the fireplace

Types of firewood used indoors

As can be understood from the information presented above, firewood racks installed in a room can be stationary and mobile, that is, portable or mobile.

Stationary firewood stands

Stationary firewood rack attached to the wall.

The following options can be called stationary stands for firewood:

- made of heavy forged metal;

— built into the design of a stove or fireplace;

- a firewood shed equipped in a wall niche;

- attached to the wall;

- made in the form of a cabinet or cabinet.

The firewood cabinet divides the room into zones.

The advantage of stationary options is that the structure can have a large capacity, which will eliminate the need to constantly replenish it with firewood, so a full “refueling” will last for a long time. At the same time, many models of stationary firewood racks take up a lot of useful space, which is unacceptable for rooms with a small area. The exception is drying chambers built into the fireplace or stove itself, or niches built into the wall.

Mobile firewood burners

Mobile options for firewood stands include portable firewood racks and mobile models equipped with wheels.

Portable stands can be made of light metal, wood, or woven from branches. Most often, these products have quite small dimensions.

Forged portable firewood box.

Metal portable stands are compact in size, usually decorated with beautiful forged elements. Therefore, they will not only become a decorative detail of the interior, but will also last for a long time. Factory-made stands, as a rule, have an anti-corrosion coating, which helps maintain the aesthetic appearance of the products throughout the entire period of operation.

A wicker version of a portable firewood stand.

Wicker stands have an aesthetic appearance and are light weight, so they are convenient for delivering firewood to the stove. However, they quickly lose their attractiveness, since the logs not only have a certain, very considerable weight, but also uneven edges, as well as rough bark. All this damages the surfaces of the baskets and leads to their rapid wear. Therefore, they cannot be called practical.

Mobile structures are also made of metal or wood, but they can have more impressive dimensions and capacity. All thanks to the fact that wheels are installed on them.

A relatively small mobile firewood burner for its “class”, equipped with wheels.

These structures are easy to use, as they can be rolled up to the door and filled with firewood without carrying logs across the room. When loading firewood into the firebox of the heating device, the stand can also be installed in the most convenient position.

In addition, wheeled stands often have special hooks for hanging brushes, pokers and other fireplace accessories.

Prices for mobile firewood

firewood bins

You might be interested in information on how to choose a wood stove for your home

Methods for stacking firewood

The generally accepted methods of storing firewood are from above and from below. The main principle of stacking firewood is to ensure that the structure does not fall apart or spill out due to unstable stacking of firewood.

There are three common ways to stack a woodpile:

• “Stack” (boards and firewood are stacked in rows parallel to each other);
• “Crate” (every subsequent upper layer of firewood is folded perpendicular to the lower layer);
• “Circular method” (laying firewood in a circle and filling the center with the same circular method, vertically or horizontally, since the middle will act as a support for the entire structure).

How to make a woodshed

It is not difficult to build such a structure; in many ways it resembles a free-standing firewood shed.

You will need the following materials:

• boards;
• plywood 20 mm – sheets 2.45x0.68 m and 1.2x2.5 m;
• roofing felt;
• tiles;
• screws.

You need to act step by step:

1. Assemble the floor frame. This is a rectangular frame and several cross members.
2. Secure the vertical support posts. The height on different sides should be different so that the roof is sloped. Attach the posts below the frame. To make legs.
3. Cover the walls, attaching the planks horizontally.
4. Prepare the boardwalk. Depending on the length, the material can be laid lengthwise or crosswise. Use galvanized screws to secure.
5. Equip the frame for the roof.
6. Prepare the rafters, maintaining an angle of at least 15°.
7. Lay a plywood sheet on the rafters, securing it lengthwise with screws at intervals of 15 cm.
8. Lay down roofing felt.
9. Secure the shingles. The beginning of styling is the lower left edge. The tiles should protrude approximately 5 cm from each edge.

The final stage is processing and painting wooden surfaces.

If you need a closed structure, then you need to form a fourth wall. You can install a door or leave a wide opening. Its width should be such that a person with an armful of logs can easily get out.

Why are firewood logs needed?

Many people believe that firewood holders installed next to the fireplace perform a purely decorative function, and therefore consider them an optional element. However, they were originally intended for a completely different purpose - the final drying of firewood before loading it into the combustion chamber.

Decorative and functional portable firewood rack.

No matter what conditions the firewood is stored outdoors, before using it, it must be at room temperature for at least a day. At this time, excess moisture evaporates from the logs, due to which the heat transfer from their combustion increases significantly.

Thus, each subsequent batch of firewood is usually brought into the room and placed in the woodshed immediately after placing already dried logs in the oven (fireplace).

Fireplace with niches for drying wood.

Therefore, manufacturers of metal stoves and fireplaces provide special niches for drying firewood in many of their models.

But in order for the wood to quickly reach the optimal state of residual moisture indoors, it is also necessary to create the correct storage conditions for it outdoors.

A woodpile set up near the house.

Therefore, chopped firewood is placed in a woodpile. It will be best if the firewood is in a ventilated shed. But if this is not possible, a firewood shed is set up for the woodpile, which should also be ventilated. Its side walls must be left open. Well, if such a structure is installed along the wall of a house or outbuilding, then a distance of at least 50 mm must be provided between the surface of the wall and the firewood. Of course, an outdoor firewood shed must have a roof so that water and snow minimally fall on the surface of the wood.

9a0f655db2eba04f63e511bcca063312.jpe

d9028a1c9173edb8274745078f901792.jpe 3285569c7f91e104b775bc7c9dadc4cd.jpe

9beed075075601a6da7daaf17b564157.jpe

If the firewood box is installed in that part of the yard where no ground covering has been created, that is, on open soil, then it is recommended to raise the bottom layer of firewood by 100÷150 mm so that ground moisture does not penetrate into the wood. To do this, a shelf is installed in the lower part of the building or a layer of moisture-resistant material is laid out.

What are firewood racks made of?

Firewood racks installed outdoors can be made of either wood or metal.

However, we should not forget that wood and metal have completely different physical characteristics. When the temperature changes, condensation forms on metal parts, and firewood can absorb this moisture. Therefore, it is best to build an outdoor firewood shed from wood. You can, in principle, use both of these materials, but arrange the structure so that the firewood does not come into contact with the metal.

A wooden firewood box is the optimal solution for storing fuel in the yard.

Wood stands installed indoors, directly next to the stove or fireplace, on the contrary, are best made of metal. This material takes on the air temperature and will help the wood dry out quickly. Since the firewood box is installed near the heating device, the metal will warm up above the general room temperature, which will also be beneficial when drying the firewood.

Prices for firewood makers Vesuvius

Drovnitsa Vesuvius

Metal firewood rack.

Another good option is firewood racks built into the wall, that is, built during the construction of a brick fireplace, or later built in the form of a plasterboard structure made of fire-resistant gypsum board

Firewood holders built into the wall on both sides of the fireplace ensure that a large supply of well-dried firewood is always at hand.

Niches built into the wall near the stove or fireplace, as a rule, have a large volume, which allows you to dry a lot of fuel at once. As it is used, reserves are gradually replenished. Fresh wood will bring a healthy forest aroma into the room, which will last constantly and be renewed after each new batch of firewood.

Firewood basket woven from willow vine

Another material that is often used for making firewood boxes is willow branches, from which baskets of various shapes are woven. The convenience of such stands lies in their low weight. So, taking a basket, you can go to the yard to get firewood from the woodpile, and then, without moving it, install a stand near the fireplace, avoiding soiling the floor.

Outdoor firewood rack for a summer residence

Storing firewood in winter will not be a problem if you properly build a firewood rack for your dacha. One of the conditions is that the wood does not come into contact with the ground, then it will be in good condition. To make a firewood shed with your own hands, shown in the diagram, it is not necessary to buy new boards; in order to save money, you can use old pallets. To protect the firewood from rain and snow, cover the rack with a tarp, the air will ventilate the firewood and keep it in good condition.

You will need boards:

A - 7 pieces, 60 cm each

B - 6 pieces, 245 cm each

C - 5 pieces per meter

D - 6 pieces of 60 cm for side walls

E - 3 x 245 cm for the rear wall

1. The first step is to make the floor. As shown in the drawing, nail the boards at even intervals and secure with galvanized screws. It is advisable to make the holes in advance so as not to split the boards.
2. Install the uprights, you just need to screw the upright boards to the frame. Check them with a level so that everything is level, then it will be difficult to correct.
3. The side walls do not need to be covered with plywood, although it is prettier this way. There should be good air circulation, and for strength it is enough to nail several longitudinal support boards.
4. Cut the grilles to the correct size using a miter saw and pre-drill at both ends before installing the galvanized screws.
5. When installing the side walls, use a tape measure; it is difficult to make an even structure by eye.
6. Sand the edges with sandpaper.
7. Finally, install the back strips.

Although the firewood rack for the dacha performs a purely functional role, it doesn’t hurt to take care of the appearance. Take the time to sand it, paint it, or, in short, give it an aesthetic appearance. Also, cover your firewood with a tarp before it rains.

Photo source myoutdoorplans.com/shed/diy-wood-shed-plans/

How to make a firewood rack without tools

Everything ingenious is simple. You can use this stand for many years, and nothing will happen to it. A very durable, stable, easily disassembled structure that can be assembled very quickly. The rack holds heavy, wet firewood without any problems.

What is necessary:

• 2 or 3 concrete blocks
• 2 thick bars

No special instructions are needed, the idea of ​​the stand is clear, it can be seen in the photographs. Just a few tips from the author.

1. place 2 concrete blocks on a flat surface, or 3 if you need support in the center;
2. insert the racks of bars into the holes in the blocks, after adding some pebbles there to prevent dirt from accumulating;
3. if the load on the racks is large, move them closer to each other;
4. Place the logs along the outer edges of the blocks.

The last photo shows a double firewood rack with another block added. In principle, you can apply a lot more, judging by the comments, this is a very durable design. Another tip from the author about storage. Cut a 3 meter long piece of tarpaulin to cover the logs, take a couple of bricks and tie a string from one end to the other to hold the tarpaulin in the wind. The more firewood there is in the woodshed, the stronger it is. The stand is high enough off the ground so that the leaves are blown away by the wind and do not accumulate under the firewood. And what’s most convenient is that the stand is very easy to move to a new location.

Photo source www.instructables.com/id/No-tools-firewood-rack/

Here is another version of a similar open rack for firewood. Everything here is also very simple.

First you need to assemble the lower frame

Please note that both ends of the horizontal components must be cut at a 75° angle. Then drill through holes through the side boards and secure them to the beam with screws. Assemble the side posts by also cutting the bottom edges at a 75° angle. Then drill through holes and secure them on the sides with screws. Add glue to the seams and remove any residue from the surface with a damp cloth.. The last step, assembling the firewood rack

Leave a gap of 10 cm from the ground to the bottom frame. Drill through holes through the bottom frame and tighten the screws. Check with a level to ensure the bottom frame is horizontal. Place the rack legs on concrete slabs to protect them from moisture

The last stage, assembling the firewood rack. Leave a gap of 10 cm from the ground to the bottom frame. Drill through holes through the bottom frame and tighten the screws. Check with a level to ensure the bottom frame is horizontal. Place the rack legs on concrete slabs to protect them from moisture.

Photo source myoutdoorplans.com/shed/wood-rack-plans/

How to build a firewood shed?

When the canopy design has been chosen, the location for its construction has been determined and all materials have been found, you can begin to work. Regardless of whether the firewood shed is built at the dacha or near the house, whether it is wooden or metal, the sequence of actions will remain the same in any case. Therefore, we will give a number of recommendations without reference to one project or specific conditions.

To begin with, a homemade firewood box made of wood or other material is applied to paper in the form of a sketch with dimensions. Then, using this sketch, the structure is marked on site and it is determined where the frame supports should be placed.

The structure must stand firmly on the ground, and the flooring must be able to withstand the load of a stack of firewood. This means that we need to take care of constructing a small foundation. It is better to make it in the form of pillars using the following methods:

• wooden beams are dug into the ground to a depth of 1 m. The underground part of the beam is pre-coated with resin or bitumen, then it will stand quietly for up to 20 years.
• It is recommended that steel pipes be concreted in the ground. To do this, a hole 60-70 cm deep is dug, a pipe is inserted into it and jammed with stone fragments. Then the hole is filled with liquid concrete.
• concrete pillars can be made without formwork. The hole is made with a hand drill, the soil is selected, and before pouring concrete, a plastic film is laid inside. It will serve as a waterproofing barrier between concrete and soil.

The simplest firewood shed on wooden poles is erected immediately, but a concrete foundation takes time to completely harden. Construction begins with the installation of a deck with intermediate joists, followed by the assembly of the wall and roof frame. The last stage is covering the walls, laying the roofing and hanging the doors, if any.

73c95c3c53be43bed9522b173df70453.jpe 79e9330f630323ef426d7753b3c2fb6e.jpe

Wooden firewood

An excellent solution can be considered placing logs in a special firewood rack, which is located at some distance from the flame. This will prevent exposure to sparks and accidental fuel combustion. You should definitely consider the distance between the firewood and the fireplace, otherwise troubles cannot be avoided. If placed correctly, you can use either a metal or a wooden product, depending on the style of the room and personal preferences. Both designs will fit perfectly into the interior and become its original addition. The light weight of a wooden firewood rack allows you to easily move it within the room and place it in any convenient place. When choosing the size of the product, remember that fire safety regulations allow only a small amount of logs to be stored in the house. It should be enough for about 3-4 uses.

Wooden firewood box Source bezkovrov.com

Types of woodsheds

To figure out how to make a firewood log, you need to get acquainted with its different types:

• Canopy. These outdoor firewood boxes are chosen for summer cottages; assembling them is not difficult. The process consists of preparing a floor raised above the ground, organizing at least 4 supports and a roof. To store large volumes, several sections are made, separating them with supports or partitions.
• Extension. It is stable and simple, with a building as the back wall. The important elements are a lower frame with an upper ceiling; it is not necessary to make walls. Such extensions are not recommended for wooden buildings, as they increase the fire hazard.
• Free-standing firewood rack for a summer house or home. It is stable and used for large volumes of fuel. There are different manufacturing methods.
• Mobile firewood for a dacha (at home). It is designed for small volumes of fuel and can be moved.

Simple country firewood

For a summer cottage on the street, you can build a simple structure with your own hands; it will cost little.

It is important to calculate the dimensions; you can use ready-made drawings or make them yourself

You need to prepare:

• on the lower frame a pair of one and a half meter boards and 4 0.34 m each;
• on the side posts 4 bars of 1.5 m each and a pair of 0.34 m each;
• for the rear crossbars 2 strips of 1.45 m each;
• drill with drills;
• hacksaw;
• level;
• pencil with tape measure.

If properly prepared, the process will take several hours. The algorithm is as follows:

1. Cut out the parts to the required sizes.
2. Make a frame. Assemble a rectangular frame from two long and two short boards. Use the remaining short strips as crossbars to keep the frame secure.
3. Attach long pole bars perpendicular to the frame. Install them in the inner corners of the base. From below, the bars should protrude beyond the frame, forming legs.
4. Using short bars, fasten the side racks at the top in pairs.
5. Secure the rear crossbars. Without them, the structure will be unstable.
6. For reliability, you can make a top floor or replace it with 1-2 boards.

Making a metal country firewood

For the woodshed, you can take a profile pipe. It will turn out strong. For a metal woodshed you will need:

• aluminum profile 2.5 m;
• a pair of L-shaped metal corners of the same size;
• self-tapping screws;
• hacksaw or grinder;
• angle grinder;
• roulette.

To get everything smooth, you need to use a level. The work will take several hours, the algorithm is as follows:

1. Saw the metal profile in the middle.
2. Cut one corner into 0.6 m sections.
3. From the second corner, prepare 4 sections of 0.3 m each, the same number of brackets of 0.15 m each and legs of 5 cm each.
4. Assemble the side posts. The vertical supports will be sections of 0.6 m each; connect them at the bottom and top with sections of 0.3 m each.
5. At the bottom of the rack, connect parts of a metal profile - they will serve as the long sides of the frame.
6. Attach the support legs.
7. Fasten the profile to the side posts with brackets, placing them at an angle of 45°.

A metal building for the street will suffer from precipitation, so it needs to be painted. It is better to use matte black paint.

The metal firewood rack must be installed evenly. A platform is being prepared for this. You need to remove the sod and add gravel. It is better to install bricks under the legs.

To make the metal woodshed more stable, you need to strengthen the supporting frame with a crossbar. It is also placed on legs.

Difficult choice

The quality of the logs determines how comfortable the temperature will be in the house. You cannot heat the room with freshly cut firewood, because the stove will smoke and the room will not get hotter, but residents can easily inhale carbon monoxide.

Therefore, the wood must be brought to a special condition: completely dry and place the woodpile so that the air inside it constantly circulates.

Most often, stacked firewood is stored under a wide canopy outside. The logs reach the desired condition in about a year.

You can build such a firewood box yourself: install it close to the walls of the house or place it on the site.

The main thing to remember when designing is that the logs must be reliably sheltered from the weather:

• firewood must be stored on some kind of flooring at a height of approximately 10 - 15 centimeters from the ground: this way the heating oil will not be saturated with moisture from the soil;
• the walls of the woodshed must be installed so that the wind can pass freely between the logs;
• the canopy should be positioned with a slight slope - so that snow and rain flow freely from the roof without falling on the wood;
• the support of the woodshed must be strong - for this purpose, special beams are screwed into the ground during construction.

You can make such a firewood shed to suit your taste - from any material: beams covered with clapboard, from a Euro pallet and even from corrugated sheets.

Do not forget that on particularly stormy days the woodpile must be carefully covered with film.

However, you should always keep a small supply of fuel in the house itself. That is why the logs are placed in the woodshed.

In addition to the fact that such a “storage” will allow you to heat the room without running outside in the cold for a new portion of logs, a firewood rack for the stove can also become a stylish element of the interior. Moreover, you can make such a stove accessory yourself.

But first things first. So, firewood holders for fireplaces and stoves located indoors are indoor, portable and stationary.

Requirements they must meet:

• such a “storage” located indoors simply must be stylish or, in extreme cases, at least not stand out from the general mood of the interior;
• The firewood box must be spacious: it is assumed that the supply of wood should be enough for a day;
• the firewood holder must have a strong structure to withstand the weight of the logs;
• the basket or firewood rack for logs must be made of fire-resistant materials, or located at a safe distance from fire if we are talking about a wicker product.

When choosing a stand for firewood, special attention should be paid to the location of such “storage”. Video:

Video:

So, for example, if there is not too much free space in the room, then a stationary type of firewood rack would be the best solution.

This design is installed in the fireplace niche during laying, or a suitable space can initially be provided inside.

However, you can make such a piece of furniture yourself, the main thing is to decide on the type of firewood.

Types of firewood for private houses and cottages

A wood log for a fireplace or other heating unit can be made from a variety of materials, but most use metal or lumber. Also, some home craftsmen use barrels, concrete rings for building wells and other items available on a country plot to create firewood.

The choice of material and available items depends on the place where the device for storing logs is supposed to be placed - inside the building or outside.

Firewood racks can be divided into 4 categories:

• stationary;
• portable;
• for premises;
• for the street.

Many homeowners use sheds to store firewood, but in buildings without constant air circulation, the firewood quickly becomes damp and the wood begins to rot. Insects and rodents often live in such a structure. The firewood box looks more attractive and stylish.

Regardless of the choice of manufacturing material, it must solve a number of problems, including:

• ensuring the circulation of air masses between logs;
• reliable protection of firewood from precipitation;
• ensuring convenient operation.

An outdoor firewood shed is similar in appearance to an ordinary shed. But its walls should not be tightly closed to ensure high-quality ventilation. The floor of the building must be raised above the ground so that the wood does not become damp. For the home, it is better to use designs that have graceful shapes.

You can build an openwork forged firewood rack for a fireplace - a stove that is small in size. It is usually assigned an aesthetic function and only a few stacks of firewood are placed in it. Depending on your desire, this stand can be made mobile or stationary. To make forged firewood, hot or cold forging is used.

Also, the indoor product must match the interior of the room, be stable, safe and easy to use. At the same time, a forged firewood logger for a fireplace can have an original, intricate design. If desired, it can be rearranged to any convenient place in the room.

An outdoor log storage facility should have a completely different appearance. When stocking up on firewood for the cold period of the year, it is necessary to ensure that the fuel is preserved until the onset of spring.

When constructing such a structure, you must adhere to certain rules:

1. There should be at least 10–15 centimeters of distance between the ground and the surface on which the firewood will lie. If this is not followed, the bottom layer of logs may become saturated with moisture.
2. When you plan to store a substantial supply of fuel, it is desirable that the structure have several floors, which will make it easier to maintain order in the building, ensure natural air circulation and thereby create an optimal level of humidity.
3. It is necessary to build a canopy at a slight slope and then precipitation will freely leave the roofing and condensation will not collect.
4. When constructing a structure for a significant supply of solid fuel, care must be taken to provide a strong foundation. Otherwise, under the weight of the firewood, the floor of the building may sag, and then the moisture coming from the soil will certainly spoil the lower layers of wood. To strengthen the firewood, strong beams are screwed into the soil.

You can weld a small firewood rack using corners and install it tightly to the wall of the house. Thanks to this, there is no need to close the back wall of the structure. The top of such a building is covered with a roof that protects it from precipitation.

A simple solution would be to build a frame with a roof made of wooden beams. But this option has a significant drawback, which is the absence of a back wall, as a result of which all the firewood can be flooded with water in rainy weather.

Therefore, it is advisable to use a metal shield made from a profile to protect the structure. Polycarbonate is considered a good solution for covering such a firewood box. Through such a coating material, sunlight will begin to freely penetrate into it, and the firewood will always be well dried.

A good idea for outdoor storage of logs is regular concrete rings. In a suburban area, a similar version of a firewood rack looks original and very stylish. In order to build it, you need to purchase factory-made concrete rings, but they are heavy. In this case, you will not be able to complete the work yourself; assistants will be needed for construction.

To mount this structure, first of all, you need to determine its location and prepare a reliable foundation by filling the soil with gravel and compacting it. After this, the rings will not be able to budge. A multi-level design will look even more attractive.

A budget option for arranging a firewood shed is a structure made from ordinary barrels. To do this, take one barrel, lay it on its side and securely fix it with wooden slats. From several barrels you can make a multi-level structure for storing firewood.

Do-it-yourself firewood rack: stand designs

Today the market can offer a large selection of stylish firewood holders. They can be made from a variety of materials that will help transform the overall interior. In addition, they will be able to provide not only reliable storage, but also convenient operation.

However, in any case, it is always more pleasant to create something with your own hands. Of course, without certain skills and without any tools, you will not be able to make this product. If you want to create a firewood box with your own hands, then it is better to try to start with the simplest method of making it from plywood.

You should start by creating a stand.

To do this you will need the following materials and tools:

• Plywood;
• Marker;
• Drill;
• Jigsaw;
• Several wooden slats;

These are the materials that are most necessary. After all materials have been collected, construction can begin.

You can make a log holder for a fireplace with your own hands

They are as follows:

1. A small ellipse of approximately 90 by 40 cm is drawn on a sheet of plywood;
2. A shape is cut out along the contour with a jigsaw;
3. Step back 5 centimeters from the edge and drill holes with a drill, the approximate diameter of which is 3 cm.
4. The plywood is placed in water for 1 hour to make it elastic;
5. After this, it is given a bent shape.
6. Wooden handles need to be inserted into the holes made;
7. These handles are attached externally with a dowel;
8. In order for the firewood box to not wobble like a cradle, it needs to be stabilized; several slats, which are attached to the base with self-tapping screws, will help with this.

As for the fifth point, it must be done very carefully, otherwise the material can be easily damaged. If you feel that the material is cracking or does not give in, lower it into the water again.

Material of manufacture

Since firewood burners do not have direct contact with fire, their design and appearance are not subject to fire safety restrictions; When choosing, you can only be guided by expediency, your own taste and interior style. Accessories can be easily distinguished by the material they are made of.

The universal and most common option is metal firewood; They are made of steel, cast iron and brass; there are bronze and copper models. Metal products are varied in shape, size and equipment; they may have additional shelves, be stationary or portable. There are two ways to do them:

• In a modern style . For production, steel sheets and metal profiles are used; they are bent to give a suitable shape.

Stands with forging elements Source kovka-krasnodar.su

How to make a firewood shed at your dacha with your own hands

Keep firewood dry. Here you can learn how to make a firewood shed at your dacha with your own hands from old pallets, boards and corrugated sheets for the roof. Pallets are used for the base of the structure so that the firewood does not become damp from the ground, remains dry and does not spoil. Treat the wood before you start building. The author suggests doing this the natural way, using steel wool soaked in apple cider vinegar. A chemical reaction dissolves the steel wool, leaving a rich brown solution that perfectly saturates the wood as it dries.

Note that steel wool must be soaked in solution for several weeks to reach condition, so do this in advance. Use a sponge to apply the mixture to the wood

Start construction with measurements and markings. The fences need to be cut into three pieces to form the back and two side walls of the firewood box. To form two side walls, saw the top of the fence panel in half. The roof line on the side walls will be angled to allow water to drain properly. Measure 20cm down from the top corners of the fence panel and make a mark on each side. Then measure 1.20m inwards to mark the center point and from this point line up a straight edge to connect the two points. Repeat the same on the other side. Then cut the fence along the marked lines

You should have one rectangle measuring 2.50 x 1.80 m and two wall pieces. The design must “breathe”, this is important for storing firewood outdoors. Clearance between the soil and the deck helps air circulate and keeps the wood dry

Pallets are ideal for this design, especially since getting them is not a problem. Place pallets near where your firewood will sit because it will be heavy when you're done. For additional reinforcement, you can join two pallets together so they sit flush and move as one. If you need to adjust the wall panels to fit the size of the pallet, cut the tall two pieces so that each side panel is the same depth as the pallet. Three vertical fencing panels will also be separated from the back wall according to the width of the connected pallets. Frame the rear wall so that the fencing slabs are reinforced with a horizontal cross brace at one end. Cap the loose ends flush with board, which will provide additional support for the back wall and roof. A simple structure with center braces will be strong enough to support the weight of a corrugated roof. Make vertical supports for the roof line by measuring from the top of the pallet to the top of the beam and secure with nails. Vertical supports will strengthen the structure and prevent the roof from sagging under its own weight and snow. The board previously installed on the top of the back wall serves as a third beam member to support some of the roof's weight. Although in principle the wall itself provides sufficient support. The cellulose fiber panels that the author used are sold in sheets measuring 1.20 x 2 m. Two sheets are enough to cover the width of the firewood box. The ridges should be positioned so that rainwater can flow down easily. Buy special roof fasteners with polycarbonate washers for installing corrugated roofing. Drive screws into every second or third ridge space along each of the three ceiling joists.

Photo source www.diynetwork.com/how-to/make-and-decorate/crafts/how-to-build-an-outdoor-firewood-shed

Option four. Wooden woodshed

One of the budget options for arranging a structure for firewood at a summer cottage is a wooden or metal building. But a firewood box made of metal is not able to provide the required air ventilation for firewood, resulting in a high probability of increased humidity and wood rotting.

For this reason, the best solution would be this simple and inexpensive option for assembling a wooden frame, which will require:

• wooden beams from lining;
• roofing felt (regular film);
• wooden board or pallet;
• moisture-proof impregnation for wood processing;
• screws;
• construction marker and level;
• brushes;
• hacksaw;
• electric drill;
• construction stapler.

After preparation, the main part of construction begins:

1. Draw a diagram of the firewood shed, taking into account the height of its walls and width. When calculating dimensions, it is necessary to take into account such a value as the required amount of firewood as a reserve for the heating period. When making calculations, the following standards are used: to heat a room with an area of ​​100 square meters, you need to prepare at least 2 cubic meters of dry firewood. The quality of solid fuel is of great importance. For example, 15-20% less birch logs will be needed for the winter.
2. After choosing the location for installing the firewood on the site, they begin to create a sketch that will reflect the dimensions of the walls and the angle of the roof - it should protrude 30 centimeters beyond the frame, otherwise during rain the outer row of firewood will get wet. At the same time, we should not forget that fuel can lie in this place for more than one year without losing its properties.
3. At the site of the structure, markings must be made using pegs and rope. Experts advise choosing a site without a slope, since the firewood box, being under the heavy weight of firewood, can tilt.
4. A foundation is made for the building. For this purpose, using an earth drill or shovel, dig 4 holes about 60 centimeters deep at the location of the pegs. Wooden blocks are lowered into the ground about 20 centimeters, but their underground part is covered with resin that resists moisture for 15 to 20 years. The base is wrapped with roofing felt on top. Then the holes are tightly filled with gravel or clay and compacted using a metal pole. Experts advise alternating sand, clay and gravel in layers of 10 centimeters. A layer of film is laid on the ground to prevent moisture from penetrating. The base is laid from bricks and cement mortar. Instead of masonry, you can use a wooden shield, which is impregnated with a hydrophobic compound.
5. Since the slope of the roof must ensure the drainage of precipitation, wooden pillars are made of different heights with a minimum difference of 13–15 centimeters.
6. To add rigidity to the structure, the first row of pillars should be connected to the rear one. They take two bars and, using an electric drill and screws, securely fasten them into a structure that is sheathed with boards or wooden beams.
7. It is advisable to make the walls of the woodshed from slabs - this is the most economical option. Small gaps are left between the elements to ensure natural air circulation.
8. The roof for the woodshed can also be made from slabs, but first create a base for it. The structure is covered with roofing felt or film on top using a construction stapler. Polycarbonate or slate is purchased to cover the roof.
9. Finally, the building is coated with varnish or paint.

Arranging a compact solid fuel storage area in a suburban area allows you to organize your firewood supplies for several years.

Peculiarities

Decorative firewood - can be indoors or outdoors. Be an additional functional and decorative element in the interior or be an element of landscape design.

firewood holder - installed indoors or in open and closed gazebos with a fireplace. They are made portable or stationary, organically fitting into the overall interior. They are made from wood, metal, thick fabric and other materials.

a1c868732e5ab1d446821f3b2562ae40.jpe dec248cf1340b1a21d0e3ad6f1ba4d91.jpe

26671895f34d6d618fc8b608f9cdf1f4.jpe

a229af02e2fa0ebfed46f387206d0da1.jpe

You cannot throw logs randomly into a woodpile. They should be folded correctly for better preservation.

Circular method

If you don’t have a stationary woodshed, then you can stack the logs in the form of a barrel tower. It is necessary to drive a stake. It will serve as the basis of the structure being built.

Tie a fishing line or rope and draw a circle of a given diameter, depending on the amount of raw material. To prevent them from becoming damp and rotting, place tree bark or thick plastic film on the ground as a base.

Place the firewood on it in a circle carefully and tightly so that the structure is stable and does not sag. By laying firewood about 0.5 m high, you can fill the middle by stacking them in any order, but quite tightly. Continue laying in this way until the barrel tower is about 1.5 m high.

"Stack"

Stacking of logs is often used. This type of installation requires support. The wall of a house, bathhouse or other building is suitable as a support; firewood grate for a summer residence. When laying, strictly control the slope towards the support. If you are laying two rows, then place thinner logs on the support and thicker ones on the outside. Due to the difference in size, there will be a slope towards the support.

If your structure stands separately from the wall, then use a wooden beam as a support. The height should be small, otherwise, under the pressure of the firewood, the support beams may break and the structure will fall apart.

With stakes

If it is not possible to lay it otherwise, you can use stakes as a support. The stakes must be those that will not bend from the logs. Drive them into the ground from several sides, forming a frame.

When stacking firewood, line each row with branches. They will play a reinforcing role. Place the logs in a checkerboard pattern. The top must be covered with any covering material that does not allow water to pass through.

Option #1 – fabric or leather carrier

You need to choose a thick fabric, you can also use old unnecessary clothes. We cut out a couple of rectangles from the fabric - 50/80 cm. If the material is very durable, you can get by with a piece of fabric in one layer; we sew two panels for greater strength. We determine the center of the canvas based on the width; a piece is cut out in the center according to the size of a man’s hand (on average 15/15 cm). The same length is cut in width on the other side.

The resulting protruding strips of fabric will serve as carrying handles; they need to be folded in half and sewn to the fabric, leaving space on the sides unsewn. The result should be handles with side holes, into which you then need to insert strong sticks made of plastic or wood. The result is a convenient carrying for firewood. A more expensive option is to use leather instead of thick fabric; this type of carrying is more practical and will last longer. Today, baby carrier sewing services are also offered online.

To make a carrier, you need to choose thick fabric, not necessarily new. This could be an old coat, jacket, or a piece of canvas. If you have an unwanted old leather jacket, use it to create a durable carrier

We cut out a firewood carrier and securely sew the handles to the main fabric. Since the cutout for the hands is quite large, you can use sticks of different diameters, the main thing is that they are comfortable to hold in your hand