Electrode heating boiler Galan - a reliable source of heat

Here you will learn:

• Features of Galan boilers
• Operating principle of the Galan electrode boiler
• Main models of Galan boilers
• Electrode boilers Galan - user reviews

Electric heating equipment is used to create heating systems in buildings not connected to gas mains. It cannot be said that this is the cheapest heating method, but sometimes it is the only acceptable one. In order to make heating more economical, it is necessary to purchase a Galan electrode boiler, the operating principle of which is to heat the coolant without heating elements.

In this review we will look at:

• Principles of ion heating in Galan heating boilers;
• Popular boiler models;
• User reviews.

After reading the material, you will be able to make your choice and decide whether you need electrode boilers or not.

Coolant and inhibitor (2)

• The most important advantage No. 1: The ability to significantly (from 40%) save on monthly electricity bills for electric heating when using the Galan electrode boiler, in contrast to the heating costs of any other type of electric boiler.
• The most important advantage No. 2: The ability to heat a larger volume of a room with less power if you are limited in input power per room.
• The most important advantage No. 3: The cost of the electrode / block of electrodes is lower than the cost of heating elements / block of heating elements of similar power. Taking into account the significantly lower operating costs (monthly payment for electricity), the total cost of ownership of the Galan electrode boiler is significantly lower than the cost of ownership of any heating element boiler from any manufacturer.

Features of Galan boilers

Main characteristics of Galan electrical equipment:

• high level of quality;
• compact dimensions;
• reliability.

Device

Elements of Galan heating equipment are:

• working chamber;
• electrodes;
• sealant and insulation of electrodes;
• power supply terminals.

Principle of operation

The operating principle of the Galan heating system does not differ from the traditional one. The water heated in the generator passes through the main piping. Entering the radiator, it gives off its heat as much as possible, due to this the air in the room heats up.

The housing acts as the first electrode, which must be grounded, and the other electrode, connected to the phase, is located inside the system and is isolated from the housing.

Specially prepared water having certain resistivity parameters can be used as a coolant, but it is best to use a special Argus-Galan liquid. This way the unit will last much longer.

Galan electric units can be used not only to heat a room, but also to provide hot water supply. Many Galan models (Geyser, Hearth, Vulcan, TEN Series) are supplemented with external storage boilers, due to which the water is heated by coolant from the main source.

Specifications

Galan equipment is constantly being modernized and improved as a result of changes in production technology. The electric boilers produced by the Galan company for heating premises correspond to their main purpose, have dimensions convenient for installation, and are made of materials that have high corrosion resistance, environmental friendliness and safety. You can buy a Galant boiler at a price that directly depends on the power and configuration of the product.

Technical characteristics of Galan electrode heating systems:

• voltage – 220/380 v, 50 Hz;
• heated room area in the range from 20 to 250 m2;
• power range of models from 2 to 25 kW;
• current range for models is from 9.2 to 37 A;
• recommended coolant is Argus-Galan liquid;
• water as a coolant – resistivity (3 kOhm/cm2—32 kOhm/cm2) at 150 degrees.

Advantages

Galan heating equipment has a number of advantages over heating element analogues.

The main advantages of Galan boilers:

1. They do not require additional installation costs, except for the purchase of a heat source. Installing the device is much cheaper than installing equipment that runs on liquid fuel. There is no need to build a chimney.
2. Does not require routine maintenance or cleaning.
3. Made from environmentally friendly and safe material.
4. They have a small weight and dimensions, as a result of which you can save space; the unit does not require a separate room.
5. Easy to install, you can install it yourself;
6. Fireproof.
7. operate from an electrical network of any voltage.
8. Wide range of power. You can choose a unit that can heat a room of about 20 square meters. m. or a whole house of 250 sq. m. m. When combining devices into a system, it is possible to heat a room measuring more than a thousand square meters.
9. The operation process is automated; the devices are equipped with a control unit.
10. Low noise level during operation.
11. Availability of protective systems.
12. Efficiency.
13. Possibility of programming operating modes.

Flaws

The disadvantages of heating units include:

1. Inability to use for floor heating, swimming pool heating, or greenhouse premises.
2. Installation of electrical equipment with a power of more than 10 kW requires approval from Energonadzor.
3. For normal operation, you will need an additional device for water circulation (pump), since in its absence the water may boil.
4. The high cost of consumed electricity, but this is rather a disadvantage of a different nature.
5. The need to monitor the condition of the electrodes, because they tend to be destroyed by water.
6. Ability to operate only on electricity.

Electrode boiler GALAX 15 N

2,015.00Br Add to cart
The head of state signed a Decree that should stimulate the consumption of electrical energy in Belarus. From January 1, 2022, it will become 3 times cheaper for heating and hot water supply needs. As the press service of the Ministry of Antimonopoly Regulation and Trade reported, Decree No. 492 “On setting tariffs for housing and communal services for the population for 2022” comes into force on January 1, 2022. Part of the provisions of the decree concerns an increase in tariffs for basic housing and communal services for the population, and the other concerns a reduction. Thus, tariffs for electricity and gas for food preparation purposes were increased by 21.8% and 25.6%, respectively, which ensures a 100 percent reimbursement level for these services. But the tariff for electrical energy for heating and hot water supply has been reduced three times in order to stimulate electricity consumption in the republic.

From January 1, 2022, the cost of electricity for heating and hot water supply for houses that are not connected to central heating and gas supply is set at 0.0335 rubles per 1 kWh. Heating appliances will need to be equipped with a separate meter.

Installation and connection, nuances

Compact design and low weight of the unit create optimal conditions for easy installation.

What kind of coolant can I use?

Kinds:

1. Water, distilled water is the best option.
2. Boiled water with the addition of Galan inhibitor.
3. Special liquid "Argus-Galan", developed specifically for use in "Galan" heating systems.

Sensor placement rules

A mandatory requirement is to ensure that the sensors are positioned correctly:

1. The inlet temperature sensor is installed on the outlet pipe of the very last section of the radiator.
2. The sensor for measuring the output temperature parameter at the outlet is installed on the outlet pipeline of the boiler.
3. To connect the sensors, stranded copper wire is used. Its cross-section should be in the range from 0.5 to 1 mm2.
4. 25 A circuit breaker for overload protection.
5. The button to turn off/on the thermal relay must be in the recessed position.

Types of Galant electronic heating boilers

The existing market of Galant electric boilers for individual heating systems offers three types of designs, which differ in their technical characteristics.

Hearth Series

The Ochag boiler series is available in four modifications:

1. Hearth-2.
2. Hearth-3.
3. Hearth-5.
4. Hearth-6.

Hearth Series

They have a low power of 2 to 6 kW and are designed for heating small rooms with a volume of 80 to 250 cubic meters. These boilers weigh about a kilogram. In this case, the volume of coolant in the general heating system can range from 20 to 70 liters.

The overall dimensions of the Galant Ochag series of boilers range from 25 to 33.5 cm in length and 35 mm in diameter. They operate from a regular 220 W network.

Geyser Series

The Galant Geyser boiler series is available in two modifications:

1. Geyser-6.
2. Geyser-9.

These heating boilers are designed to heat rooms with an internal volume of 250 to 340 cubic meters. Geyser Cross

To install Geyser heating boilers, a three-phase network with a voltage of 380 W is required.

With proper thermal insulation, Galant Geyser boilers consume from 2.5 to 4 kW of electricity per hour. They weigh about 5 kilograms and are made about 40 centimeters long. The volume of coolant in the heating system where these heaters are installed can be from 50 to 200 liters.

Vulcan Series

The largest Galant electronic heater is its modification called Vulcan. These heating devices weigh 5.7 kilograms, have a power of 25 kW, operate on a three-phase network of 380 W, and heat rooms up to 850 cubic meters.

DIY installation

Preparation

Algorithm of actions:

1. Ground.
2. Protect terminals and live parts from moisture and contact with the surfaces of the unit.
3. Install a circuit breaker - a switch to cut off the current. A 25 A automatic machine, for example.
4. Follow the connection diagram recommended in the data sheet.
5. Observe the connection rule: phase - zero - ground.
6. Check the tightness of threaded and welded connections.
7. Minimize, it is better to prevent the possibility of water getting on the body of the ion boiler.
8. Buy an expansion tank.
9. Turn off the boiler if ice forms in the heating system and defrost.
10. Ensure the cleanliness of the pipeline and prevent the penetration of metal shavings and foreign substances into the device and system.

Installation

Sequence of work:

1. Connect the coarse filter.
2. After installation, rinse the system thoroughly with Galan inhibitor.
3. Install the equipment in a vertical position, with the protective cap at the bottom.
4. Secure the equipment to one of the walls of the room. The connection to the heating system is not decisive.
5. The unit must be connected to the electrical network by an electrician who has permission to work with electrical equipment up to 1 kW.
6. Thoroughly strip the ends of the wire of insulation.

Setting the temperature value

Procedure:

1. Set the coolant outlet temperature within 70-75 ºC.
2. The input temperature is calculated based on numerous factors: the volume of the heating system, the temperature of the surrounding atmospheric or air space inside the room, the condition and indicator of the thermal insulation protection of the room, the volume of space. On average, this temperature ranges from 40 to 45 ºC.

If the unit is connected correctly, the current parameter reading will be within 23 A. The equipment operates in “automatic” mode during operation. Read sewn in our article.

Connection diagrams

When connecting Ochag-Turbo boilers to the power supply, the protective casing is not removed. The power supply is connected to the wires removed from the casing. The Navigator electronic regulator can install electrical equipment in accordance with the diagrams.

Fundamental

Parallel

Purchase and delivery

We sell heating devices from trusted brands, as well as Russian cast iron radiators, underfloor heating systems, pipes and fittings. Cash and non-cash payments are accepted, there are discounts for large orders and for regular clients. Delivery of orders throughout Moscow and the region is carried out in the shortest possible time. For additional consultations, assistance in choosing heating equipment and system components, as well as for direct ordering, please contact the company’s managers. The website contains contact phone numbers; you can use the call back option, as well as write to managers using the feedback form.