Vektor JSD 20-W: Instructions and manual in Russian

Dear buyer...

Page 2

Image
Text

Dear buyer!

You purchased a gas instantaneous water heater with an electronic device

vom, allowing it to be automatically ignited when the hot water tap is opened.

The device has a digital indicator that allows you to control the temperature

heating cycle of water flowing from the tap (only for model JSD20-W).

Thank you for choosing our water heater. When purchasing a device, check the completeness and also ask for the completed

supply of coupons for warranty repairs by the trading organization.

This instruction manual contains installation information

device, rules of use and maintenance, safety measures during operation of the device, compliance with which will ensure long-term trouble-free and safe operation of the product. Please read it carefully and follow the instructions contained therein.

VEKTOR water heaters have all the necessary certificates and are approved

to installation.

Installation of the device, instructing the owner on the principles of operation and rules

operation of the device, maintenance is carried out by the operating organization of the gas industry or other organizations that have a license

for this type of activity.

Checking and cleaning the chimney, repairing and monitoring the plumbing system

Communications are carried out by the owner of the device or the building management.

Responsibility for the safe operation of the device and for its maintenance

proper condition is the responsibility of its owner.

If you had questions about quality, they could not explain to you all the advantages

properties of VEKTOR water heaters or did not explain the principle of operation, please contact the following numbers:

—

in St. Petersburg (multi-channel)

—

in Moscow, 741-77-67

—

in Krasnodar, 68-09-52

We inform you that the water heaters listed in this manual are designed

nerds are for home use only.

Thank you for purchasing

our water heater!

Specifications

A flow-through geyser from this company ensures an uninterrupted supply of hot water. It lights up automatically, making the device easier to use. Despite the Chinese assembly and low cost, its functionality is no worse than its more expensive analogues.

This is evidenced by the following characteristics of these water heaters:

Capacity 10 l/min;
Pressure from 0.2 to 7.5;
Power 18-20 kW;
Gas consumption 1.5-2.5 m3/hour;
Water pressure from 2.5 l/min;
Weight from 5 to 10 kg depending on the model;
Width up to 13 cm, depth up to 19 cm, and height no more than 64 cm;

Functions:

Gas control;
Ionization sensor;
Power indicator;
Thermometer.

SAFETY INSTRUCTIONS ……………………………..

Page 3

Image
Text

CONTENT

SAFETY INSTRUCTIONS ……………………………………………………………………………… 4

DESCRIPTION AND OPERATION OF THE PRODUCT………………………………………………………………….. 5

2.1 Purpose of the product………………………………………………………………………………….. 5 2.2 Technical characteristics……………………… ……………………………………………………………………. 5 2.3 Product composition……………………………………………………………………………………………………………. 5 2.4 Description of the device and purpose of the main components………………………………………………………. 8 2.5 Overall and installation dimensions ……………………………………………………………….. 9 2.6 Electrical circuit ……………………………………………………… …………………………………………….. 12

INSTALLATION PROCEDURE………………………………………………………………………………….. 13

3.1 Installation location…………………………………………………………………………………………. 13 3.2 Installation of the device ………………………………………………………………………………….. 13 3.3 Water connection ………………… …………………………………………………………………………………….. 14 3.4 Gas connection ………………………………………………… ……………………………………. 17

3.5 Connecting the device to a liquefied gas cylinder…………………………….. 17

3.6 Installation of a chimney for removal of combustion products (except for the JSD11-N model) 17 3.7 Installation of a JSD11-N water heater (without connection to the chimney) ………… 18

USING THE DEVICE …………………………………………………………………………………………. 20

4.1 Turning on the device ………………………………………………………………………………… 20 4.2 Adjusting the degree of water heating ……………………… ……………………………………. 20 4.3 Switching off the device for a long time ……………………………………………………………….. 21 4.4 Frost protection ……………………………………………………………… ……………………. 21

MAINTENANCE………………………………………………………………….. 22

5.1 Inspection…………………………………………………………………………………………………………………………. 22 5.2 Care…………………………………………………………………………………………………………….. 22 5.3 Maintenance… …………………………………………………………………………………. 23

5.3.1

Burner cleaning

…………………………………………………………………………………………………………. 23

5.3.2

Cleaning water and gas filters

………………………………………………………………………………. 23

5.3.3

Cleaning the heat exchanger

…………………………………………………………………………………………. 23

5.3.4

Replacing sealing joints

…………………………………………………………………. 24

5.3.5

Checking the tightness of the gas and water systems of the device

……………………… 24

5.3.6

Checking the functionality of the traction sensor

………………………………………………………. 24

5.3.7

Checking the functionality of the heat exchanger overheat sensor

…………….. 24

5.3.8

Extraordinary cleaning of the device

……………………………………………………………………………. 24

5.3.9

Checking the functionality of the ODS system sensor (for model JSD11-N)

POSSIBLE DEVICE MALFUNCTIONS AND METHODS FOR THEIR ELIMINATION.... 25

STORAGE RULES…………………………………………………………………………………. 27

WARRANTY …………………………………………………………………. 28

CERTIFICATE OF ACCEPTANCE……………………………………………………………………… 28

10 NOTE ABOUT INSTALLING THE DEVICE AND CONDUCTING MAINTENANCE …………………………………………………………………………………………… 29

Turning on the device

The first step is to install the batteries. To do this, open the battery compartment and install them, observing the polarity. Then you need to open the cold water and gas valves. Open the hot liquid tap on the nearest faucet.

At the moment when the liquid flows through the water unit, a spark ignition occurs and, thanks to this, the burner ignites. If it is turned on for the first time or after a long period of inactivity, air may accumulate in the gas line; in order to remove it, you will need to open the mixer several times, hold it for a minute, and then close it.

If the burner ignites, you need to turn the water pressure adjustment lever (located on the right) to the right, this will make it possible to turn on the Vektor JSD 20 device when the liquid pressure in the system has decreased.

W overall and mounting dimensions...

Page 10

Image
Text

Rice. 2b. Vektor JSD12-W overall and mounting dimensions

Comments

Select → I found the instructions for my water heater here! #manualza

Click →

Instructions: “It is prohibited to disassemble the device. There are no parts that can be repaired by the user.” The manufacturer intrigued me. Almost provokes!

Manualza!manualza.ru

Still not with us?

Advantages of Vector speakers

The Vector gas water heater was created taking into account gas and water pressure in Russia. These speakers have an attractive design and are sized to fit even into a small kitchen or bathroom. The company's gas equipment meets all standards and has several protection systems. This is why Vector speakers are so popular.

The following advantages can be noted over other similar devices:

Low price, allowing you to install a gas instantaneous water heater in any home or country house;
Stylish design will fit into any interior;
Using a geyser is very simple - there are only two regulators;
The “winter-summer” switch on some models allows you to save fuel in the warm season;
The presence of electric ignition eliminates the need to use matches or lighters; this function also reduces gas consumption;
The Vector geyser operates without a chimney, which makes it possible to install it in any non-residential premises;
The water heater operates silently;
Thanks to the availability of any parts for sale, there are no questions about repairs.

Is it possible to save money?

The very fact of installing a meter is a sufficient guarantee of a reduction in gas payments due to lower prices for actually consumed cubic meters of fuel compared to standard indicators and the ability to influence the amount of consumption.

Consumption can be reduced due to a thrifty attitude to resource consumption and the use of economical modern gas appliances.

Unauthorized intervention will not bring results due to the reliable protection provided by the design features of the meter, and is prosecuted by law.

Device maintenance

For smooth and trouble-free operation of the gas water heater, it is necessary to carry out certain actions in a timely manner. These include visual inspection and maintenance.

In order to avoid fire hazards, monitor the condition of the ignition group and the main burner, promptly clean them from accumulated carbon deposits, and ensure that the gaps in the heat exchanger are not clogged with soot.

The case itself must be cleaned of dust using a soap solution. It is strictly forbidden to place anything on the device or hang it up.

Maintenance must be carried out once a year and includes:

Cleaning the burner.
Cleaning or replacing filters, water and gas.
Cleaning the heat exchanger.
Gaskets also need replacing.
Lubrication of all moving elements.
Checking the serviceability of the traction controller and water sensor.

Before each start-up you need to check:

There should be no smell of gas in the room; if a leak occurs, immediately open the window for ventilation and call the gas service.
Serviceability of the chimney system.

Popular models

This brand does not have a wide variety of models. There are only three most popular ones, which have minor differences in appearance, performance and additional features.

JSD20W

The Vector Jsd20 W water heater has compact dimensions and an affordable price of 10,500 rubles. Available not only in white, but also in silver and gold. This allows you to match the device to the interior of the room. This model has a digital display and a winter-summer switch. There is an overheating sensor and lack of traction control.

The water heater has high performance. It is popular due to its digital display and automatic ignition. A multi-level protection system ensures safety.

JSD 11-N

This model has a higher quality copper heat exchanger, which increases its service life. The advantages include the fact that this is a chimneyless gas water heater, and its burner is made of stainless steel. Compact dimensions allow you to install the device even in a small room and on a plasterboard wall.

A high-quality system of protection against overheating of the geyser, as well as control of gas leakage, increases the level of its safety. The model can run on liquefied gas. Its setup and operation is very simple, and the cost is only 6,200 rubles. Therefore, this model is often chosen for a summer residence.

Lux Eco

The Vector Lux Eco geyser is a new model. Its features include the presence of an enhanced security system and the ability to select a temperature mode.

The model is resistant to pressure drops and pressure drops. The set includes a faucet and a shower head, which makes it easy to install the device in the country.

The “Vector Lux Eco” column is decorated with beautiful mirror panels and drawings. Therefore, it can be not only functional, but also a decorative detail of the interior. Despite this, the device has a low cost - only 5900 rubles.

How to use

This gas water heater is automatic and easy to use. But you still need to study the instructions for use. First of all, you need to install it correctly. Such water heaters are connected not only to the water supply system, but also to gas pipes. This should be done by a specialist. Additionally, you will have to purchase a chimney pipe, fittings, and fasteners.

After installing the device and connecting to all communications, the specialist will make preliminary settings for the device and check its operation. The operating instructions recommend first passing water through the column pipes, removing air from them. Then close the tap and insert the batteries. Now, after turning on the water tap, the burner will automatically ignite. All that remains is to set the desired temperature. It is recommended to choose no more than 550, especially if the water hardness is increased.

During operation of this water heater, various malfunctions may occur. Most often, users contact the service center about several problems.

The Vector water heater does not turn on or lights up and immediately goes out. There may be several reasons for this problem. The most common is that the batteries are dead. You can handle this on your own. But if there is a spark, but the “Vector” column does not light up, you need to check the traction. The chimney may be clogged or the seal of the air duct joint may be broken.

The water doesn't heat up well. This most often happens due to scale accumulation or clogged heat exchanger tubes. But you may have to study again how to set up a gas water heater and adjust the power.

Poor water pressure from the boiler when the water supply is normal may be due to a clogged heat exchanger or water filter.

The speaker makes a lot of noise when working. The reason for this may be a malfunction of the heat exchanger or very high gas pressure.

The question of how to disassemble and repair a water heater is best left to specialists. But some problems at work can be solved on your own. For example, if the filter or heat exchanger tubes become clogged, they can be removed and washed under water. "Vector" is a water heater for which it is easy to buy parts. But with regular descaling and proper operation, the device will last a long time without repair.

Disadvantages of water heaters from this company

Despite many advantages, the Vector instantaneous water heater is not a very reliable and durable device. Many parts quickly fail, and there are also no modern functions that are found in expensive devices. The only good thing is that spare parts for the Vector geyser can be bought in any city.

The most common breakdown is burnt out heat exchanger tubes. They are made of thin copper, so they will burn out over time. Many users note that, despite the fact that there is a water temperature sensor, it is difficult to set the required indicators to change it. There is no automatic adjustment to water pressure. One of the disadvantages is the need to frequently replace batteries.

Important! Without timely maintenance of the device, after 5 years of operation, the automatic ignition system may fail. In this case, turning on the column will be accompanied by an explosion.

Meter installation

To install a gas meter, the gas supplier invites a company that has confirmed its approval with the appropriate permits from state regulatory authorities. The work costs around 8,000 rubles.

During the installation process, it is necessary to comply with the manufacturer’s passport requirements and the provisions of individual project documentation.

Dimensions and installation standards for stove meters

After checking that the connection is correct, there are no leaks and seals have been applied, an employee of the gas supply company records its commissioning with the appropriate entry in the product passport.