Izovol insulation technical characteristics, pros and cons, types

An example of using Isobel slabs

Instructions for using this material for thermal insulation of pitched roofs are presented in the table:

This is what the roof slopes look like after installing a vapor barrier immediately before the sheathing

When thermally insulating partitions and horizontal surfaces, the material is installed according to a similar scheme. The main thing is to ensure protection from moisture and compaction!

Advantages of insulation

Mineral wool would not have become so popular among consumers if it did not have a number of advantages. In relation to Izobel brand insulation, the qualities listed below are considered as such.

1. Excellent thermal conductivity - coefficient from 0.03 to 0.04 - one of the smallest among insulation materials. If we add to this the thinness and elasticity of basalt fibers, we get an almost ideal material that allows us to significantly save on heating the room.
2. Fire resistance - isobel belongs to group IV of fire safety materials. If there is a fire source nearby, its physical and chemical properties will remain unchanged; the slabs will also become a barrier to the spreading fire.
3. Long service life - insulation made from basalt stone lasts at least 50 years if storage conditions are met. Excess liquid will not affect the material in any way - the fibrous structure will easily allow steam to pass through and condensate to evaporate.
4. Weak water absorption - basalt is non-hygroscopic; only 1.5% of its volume can be filled with moisture. If water-repellent additives are used in production, the value is reduced to 1%.
5. Good vapor permeability - achieved by the fibrous structure of the material and promotes the use of isobel in baths, saunas or industrial premises.
6. Sound insulation - depending on the thickness of the slab, they completely or partially neutralize extraneous noise.
7. Resistant to corrosion, fungi, rodents, unattractive to birds.
8. Affordable price - isobel costs on average 15% cheaper than mineral wool analogues; for a slab of 1 sq. m and a thickness of 50 mm, the consumer will pay from 100 to 300 rubles.
9. Environmental safety - achieved by a minimum amount of chemical components used to increase water repellency, and this is not always the case.

The above is only part of the positive aspects of izobel insulation. Other benefits are easier to feel during operation rather than described.

Main types of Izovol insulation and scope of application

Izovol ST – has a medium density. It is used for insulation of hanging poorly ventilated structures, where it is necessary to create a gap between the facade and a layer of insulating material.

Izovol F - allows you to provide walls with reliable thermal insulation and sound insulation. Before starting to lay the insulation, the walls are carefully plastered and leveled.

Izovol KV – is characterized by high rigidity and increased resistance to moisture. Used for insulation of two-layer flat roofing.

Izovol L – has a low density, used in the manufacture of structures that may be subject to mechanical impact during operation. The material is used to insulate pitched roofs, frame walls, partitions and floors.

Izovol B – the slabs are additionally covered with fiberglass. They are most often used when carrying out work aimed at insulating the facades of buildings characterized by normal ventilation.

Izovol K - used for insulation of flat roofs.

Izovol P – is characterized by high rigidity and high resistance to moisture. The material is used for insulating basements and floors, including those equipped with a heating system.

Group No. 1. General building thermal insulation

It includes many types of insulation; for the convenience of users, all technical characteristics are presented in table form.

Note! The above-mentioned “Noise Protection” is an insulation that also has excellent noise insulation characteristics. Izovol insulation comes in other types, let’s take a look at them

Features of isobel installation

Due to its ease of use, insulation is used almost everywhere. Thermal insulation with its help will be justified in the following places:

• partitions between floors;
• floor;
• roofs with a slope;
• attics;
• walls.

Like any other mineral wool, insulation requires two additional layers - hydro- and vapor barrier. The first protects the slabs from getting wet from the outside, the second - from the inside. When installing isobel on a sloping roof, it is recommended to create an air gap, the purpose of which is to remove accumulated condensate.

The key difference between isobel as mineral wool and polystyrene foam is that it is not mounted directly to the wall with glue, but is placed inside cells formed by a wooden sheathing. The advantage of this need is additional strengthening of the building frame, the disadvantage is financial investment.

Area of ​​use of Izovol thermal insulation

Basalt slabs are used in the construction of private houses and multi-storey buildings; they can be used to insulate:

• floors;
• thermal insulation of baths and saunas;
• walls inside and outside;
• pitched and flat roofs;
• gables and attics;
• pipelines and ventilation systems;
• floors under screed and without load.

Izovol basalt-based insulation materials attract buyers with their excellent characteristics and a decent ratio of cost and product quality.

Thermal insulation IZOVOL

The Izovol company produces building materials for a comprehensive solution to problems (heat, sound, fire) insulation. Izovol brand insulation is used in systems, structures and structures for various purposes, and is also used for the reconstruction of buildings. Izovol technologies are successfully used in medicine, energy and mechanical engineering, which makes the company the absolute leader in its industry.

Izovol products are distinguished by an incomparably high level of quality. It is possible to maintain a consistently high level of production at the enterprise thanks to the availability of modern technology and experienced specialists who control the quality of goods at every stage of production.

The latest technologies, developed by the best specialists of the IZOVOL laboratory, reduce the risk of defects and defects, therefore the company gives its customers a guarantee for each product.

Another of the main principles of Izovol is the production of environmentally friendly insulation that is safe for human health. The underlying material is pure basalt fiber, so when choosing Izovol, you can be sure that you will not harm yourself.

IZOVOL is proud of its innovations and values ​​​​every customer

The plant management is confident that a responsible attitude to production combined with attention to the Consumer guarantees the success of any product

Characteristics of Izovol insulation

Thermal insulation of walls is a guarantee not only of insulation of external walls, but also of sound insulation and fire resistance. Insulation for external walls is produced using environmentally friendly fiber technology - ECOSAFE, which is why Izovol thermal insulation is used in residential construction. Isovol material density helps to reliably isolate walls from external noise and drafts.

Which insulation is better - Izovol insulation

On the website of TD SSKomplekt we offer you to get acquainted with the best Izovol insulation products:

It is worth noting that Izovol mineral wool is a certified and high-quality building material that does not cause harm or damage to health. The thickness of Izovol insulation guarantees protection from external influences. Thermal insulation of the facade is necessary in residential construction. Thermal insulation is suitable for insulation of interfloor ceilings, rooms with high humidity and insulation of basement floors.

Izovol insulation for the house outside has a warranty period and will not upset the owner of the house. The calculation of thermal insulation quantities for a construction site is carried out by architects and technologists when planning a building project. Thermal insulation of the roof is necessary for insulating frame walls and ceilings between floors.

Buy wall insulation Izovol

You can always buy Izovol insulation inexpensively at the StroySitiKomplekt trading house.” The official Izovol dealer is ready to provide you not only with a guarantee from the manufacturer and all the necessary documents, but also to offer a favorable price for insulation. Order insulation from StroySitiKomplekt by calling the number listed on our website and receive a free consultation and cost estimate from our managers.

Parameters of products of the IZOVOL trademark

Izovol thermal insulation products are made from high-quality gabbro-basalt rocks. To improve the quality of mineral wool, the company uses the technology of melting stone with gas. Slabs are formed from basalt thread, which can be used as insulation and fire insulation. The use of ECOSEF technology in production allows us to create mineral wool with a stable acidity level. The material becomes environmentally friendly, does not change geometric dimensions, and is durable.

Thermal insulation properties are the main criterion when choosing insulation. The fibrous material Isovol effectively resists the penetration of cold and heat. Under the same conditions, a 50 mm basalt slab is comparable to 2000 mm of concrete, 550 mm of brick and 165 mm of wood. The use of mineral wool will significantly reduce the cost of heating buildings; its thermal conductivity is 0.034-0.038/

The fireproof properties of the material make it possible to protect wooden structures from fire. Thermal insulation can withstand temperatures up to 1100 degrees and the direct action of fire, while it does not melt or change its characteristics.

Thanks to the chaotic arrangement of stone fibers, Izovol insulation dampens the propagation of sound waves and is used as a sound insulator.

The structure of basalt slabs gives them tensile strength and delamination, and at the same time makes them elastic. Insulation blocks are easily mounted on a curved structure.

The peculiarity of the production of mineral wool stone fibers ensures stable dimensions and high strength of the insulation; its service life has been increased to 50 years. The durability of the slabs is facilitated by their biological neutrality; mold and mildew do not grow on the material, and rodents do not live. Aggressive environments, acids and alkalis, also do not affect the strength of thermal insulation.

To ensure that the insulating material used for enclosing structures, roofing and flooring is not damaged by moisture, basalt products are produced with water-repellent properties. The addition of special preparations during production helps increase the hydrophobicity of the slabs. Water absorption of the material is only 1% of the volume.

The strength of mineral wool stone fibers ensures stable dimensions and high strength of the insulation; its service life has been increased to 50 years. The durability of the slabs is facilitated by their biological neutrality; mold and mildew do not grow on the material, and rodents do not live. Aggressive environments, acids and alkalis, also do not affect the strength of thermal insulation.

The environmental safety of Izovol insulation makes it possible to place them inside houses and apartments without threatening human health. The high vapor permeability of the products creates an optimal level of moisture and promotes effective steam circulation.

People's opinions

“I always thought Parok was the ideal insulation material until I talked to my neighbor in the country. It turns out that three years ago he mortgaged the entire house with Isobel and was pleased with the result. The temperature in the house in winter became much higher, and during this time the insulation itself did not lose any of its volume (at least where we were able to look under the cladding). I decided to buy one for myself – the material is really excellent.”

Maxim Medvedev, Moscow.

“To be honest, at first we were afraid to take Isobel - the brand is not particularly well-known, and there were no reviews about it. But the price turned out to be too attractive, so we took mineral wool for trial to insulate the outbuilding. With the onset of cold weather, the basalt thermal insulation showed itself to be excellent, the characteristics corresponded to the declared ones, and removal of the cladding after a year did not reveal any unpleasant surprises. Now we will only use Isobel.”

Andrey, Voronezh.

“I liked the new insulation in my work: it holds volume well, is easy to install, and the price, frankly speaking, is attractive. Of the minuses, I would mention the poor packaging - bulky and not very durable. It also turned out to be difficult to unravel the sheets lengthwise: even a sharp knife does not cut, but crushes the fibers. But across the blade, it cuts through basalt Isobel just perfectly.”

Grigory Miroshkin, St. Petersburg.

“I read good reviews about Isobel slabs, which supposedly do not produce allergenic dust, and bought them to insulate the ceiling. It turned out that they generated dust no worse than glass wool - although I worked in overalls, gloves and goggles, and then itched and coughed for a couple of days. Now I’ll think about how to close it from below more securely so that all this trash doesn’t fly into the rooms.”

Yuri, Belgorod.

https://youtube.com/watch?v=eTi68WouryQ

Price

Installation

The slabs can be installed independently. As an example, consider the protection of the pitched roof of a private house. The day before you should prepare all the necessary equipment and the plates themselves. When working we will need a tape measure, a knife, a stapler, bars and plastic film

It is also important to prepare the surface itself. The roof is checked for leaks, rot and other defects

They must be eliminated before insulation work begins, otherwise the thermal insulation may be seriously damaged.

After the necessary work is completed, a lathing made of wooden blocks is nailed to the roof rafters. The recommended cross-section of the components is 4*4 cm. The lathing creates a gap between the roof surface and the heat insulator, preventing condensation from penetrating into the room.

Installation of slabs

At the next stage, the installation of insulation boards is carried out. They are placed on bars between the rafters. They are fastened together with a construction stapler. To hide the seams, cover them with double-sided tape. All that remains is to lay a layer of vapor barrier. Polyethylene or other similar material may be useful.

The process ends with finishing. The insulation is covered with the selected finishing material, for example, plasterboard.

Areas of use

The slabs are intended for use in civil and industrial construction as:

• the main heat and sound insulation layer in facade heat-insulating composite systems with external plaster layers.
• the main heat and sound insulation layer in facade heat-insulating composite systems with plastering over galvanized steel reinforcing mesh.
• cuts, fragments for framing window and door openings in facade thermal insulation composite systems with external plaster layers when using flammable insulation (expanded polystyrene) on the main plane of the facade.
• the main heat and sound insulation layer with cladding with small-sized ceramic tiles on buildings and structures.

Characteristics and parameters

Currently, manufacturers offer isovol in mats and rolls. As mentioned above, this is basalt wool, which is made by melting and drawing threads from the molten stone mass. It is the fibrous structure that creates the possibility of the formation of air capsules between the threads, and this, in turn, is the most powerful thermal insulation.

The production of isovol is modern; high-tech equipment and high-quality raw materials are used here, so the technical characteristics of the material can be classified as “high”. Let us add that this technology is patented and has an international quality certificate ISO9001:2000 No. 41060. Domestic can be considered a leader in this area.

Heat map of Izovol insulation use

Advantages of insulation

• Isovol TechnoNIKOL mineral wool insulation made from natural materials is environmentally friendly. It is harmless to human health and life. It is distinguished by:
• High fire-fighting properties. The insulation begins to melt at a temperature of +1110C. These are irreplaceable qualities for modern construction.
• Basalt fibers inside the material are arranged randomly, which is why isovol has high sound-absorbing properties. This is another huge plus.
• High coefficient of vapor permeability. If we compare this indicator with other heat insulators, then isovol can give many a head start.
• This insulation is not spoiled by rodents, bugs and other small insects do not grow here, mold and fungi do not multiply in it. TechnoNIKOL insulation laid on a metal surface protects it from the negative effects of moisture, which means that there is no corrosion of metals under the insulation.
• During operation, mineral wool heat insulator does not lose its shape, size and quality.
• Long service life, which depends on the degree of water absorption. It makes up only 1% of the total.
• Quite high thermal performance indicators, which we will discuss below.

The material is environmentally friendly Has fire-fighting properties Durability meets standards

A table with technical characteristics will definitely be presented, but I would like to make a comparison with other building materials.

TechnoNIKOL isovol with a thickness of 100 mm and a density of 100 kg/m³ can replace:

• wood 225 mm thick;
• ordinary brickwork – 1600 mm;
• silicate brick masonry – 2000 mm.

Flaws

This thermal insulation material has one drawback - its high price. But it is compensated by a huge number of advantages. So it makes sense to take a closer look at it.

Basic properties and characteristics of the material

Izovol insulation characteristics

has only positives and all thanks to the fact that only high-quality materials are used in production and production technology is strictly followed. Let's take a closer look at the benefits of insulation.

Low thermal conductivity

. The use of modern equipment has made it possible to produce insulation that combines:

- efficiency;

— reliability;

- safety;

- durability.

The low degree of thermal conductivity of insulation is one of its most important advantages. Izovol insulation is resistant to any type of load and has low thermal conductivity, which allows it to be used for insulating surfaces regardless of their operational loads. Using this type of insulation allows you to minimize the transfer of heat from a warm surface to a cold one, thereby increasing heating efficiency and at the same time reducing heating costs. insulation for walls

It has high technical characteristics, which is why the material has gained such enormous popularity among consumers.

The low thermal conductivity of the building material in question is explained by its fibrous structure, which contains many micropores that prevent thermal radiation and air convection.

High degree of fire resistance

. In the production of Izovol insulation, special stones, which are classified as non-hot substances, are used as the main material. When in contact with a flame, the material is able to maintain its high physical and mechanical characteristics for a long time and, in addition, prevent the rapid spread of fire.

Izovol insulation has a high temperature limit in comparison with many other known insulation materials (slag wool, glass wool). Thus, the type of insulation in question is capable of withstanding temperatures exceeding 1000°C for a long time.

Thus, Izovol insulation characteristics

whose fire resistance is quite high, it is successfully used when insulating building structures, regardless of their main purpose. It is important to know that Izovol insulation belongs to the first group (highest) fire-retardant efficiency.

Hydrophobicity.

Moisture that penetrates into the structure of the insulation contributes to the destruction of its structure and the formation of mold and the development of fungus on the surface of the wall. However, if Izovol slab is used as insulation, then these and many other problems can be easily dealt with. During the production of the material, special moisture-repellent elements are added to the composition, which significantly increases the moisture resistance of the insulation.

IZOVOL thermal insulation is used to insulate building structures, regardless of its main purpose. The durability and reliability of the material is explained by the level of water absorption, which for this material is no more than 1% of the total volume of the material. No other insulating material has an equal or lower water absorption rate.

High sound insulation

. The material is able to effectively retain sound waves, regardless of the source of their occurrence, thereby increasing the level of comfort in the room.

Izovol products have excellent sound insulation characteristics that meet the requirements specified in regulatory documents. Due to its ability to prevent noise from penetrating into rooms, this type of insulation is especially advantageous to use if the walls of the room overlook the roadway or other places that are a source of noise.

High degree of vapor permeability

. This characteristic is one of the most important advantages of the material. Moisture from the room passes freely through the structure of the insulation, after which it is removed from the material as a result of evaporation. This has a positive effect on the operation of the structure, since excess moisture is promptly removed, so that mold and mildew do not form on the wall surface.

Environmental Safety

. The insulation contains no harmful components that can cause harm to human health, so the material can safely be used for insulating residential premises. The use of Izovol insulation allows you to provide a normal microclimate in the room and increase the degree of hygiene of the room.

Chemical resistance

. Izovol insulation is not aggressive. The advantage of the material is its resistance to organic substances such as acids, solvents, alkalis. In addition, the material is able to provide structures with protection from corrosion, which guarantees increased operational and other characteristics of the room as a whole. The insulation meets the requirements of sanitary and hygienic standards, and is also characterized by stability of shape and size, resistance to mold, fungi and microorganisms.

Izovol insulation materials, regardless of operating conditions, are not subject to shrinkage. It is important to know that the coefficient of linear expansion in this material is “zero”. The material is simple and easy to work with; cutting it does not require a special tool; all you need is a sharp knife.

Durability.

The choice of material should be made based on many parameters and selection criteria, but when choosing, one should not forget about the durability of the material, that is, for how long it can serve efficiently. During testing, Izovol insulation materials showed amazing durability results (more than 2300 cycles). Due to the fact that the highest quality materials were used in its production, the insulation can last more than 50 years, regardless of operating conditions.

Izovol insulation materials, which were produced on the basis of natural basalt stone, have the longest service life. During the production of insulation, Izovol specialists managed to develop a unique composition of fibers at the molecular level, resulting in optimal acidity stability. Ultimately, it was possible to significantly improve the performance characteristics of Izovol insulation.

And finally, we note that Izovol insulation is the most stable and stable thermal insulation material, capable of maintaining its technical and operational characteristics for many years.

The plant's products include the following slabs:

IZOVOL “Noise Protection” - designed for sound insulation of rooms and buildings, the slabs have a size of 1000x600 mm, thickness from 40 to 250 mm, in increments of 10 mm. Has a flammability group - NG

IZOBEL (ISOBEL) - the lightest slabs, with a density of 25 kg/m3, used for thermal insulation of non-loaded structures (partitions, floors with joists, interfloor ceilings)

IZOVOL slabs, general building thermal insulation of higher densities, the names are quite short, but it’s not difficult to understand by the name where the slab is used

Izovol L-35 - light, non-loadable structures

Insulation of external walls under ventilated facades

• Izovol St-50 - density 50
• Izovol St-60 - density 60
• Izovol St-75 - density 75
• Izovol St-90 - density 90

Mineral wool laminated with canvas, as an outer layer of insulation in ventilated facades

• Isovol B-50 - density 50
• Izovol V-75 - density 75
• Izovol V-90 - density 90

Insulation under a plaster facade (see article)

Insulation of flat roofs

• Izovol K-100
• Izovol K-120
• Izovol K-150
• Izovol K-175

The top layer of thermal insulation in flat roofs (KV - roof top)

Izovol produces the following types of insulating materials:

• General construction thermal insulation
• Soundproofing
• Technical thermal insulation
• Fire protection
• Thermal insulation for sandwich panels

Facilities where the plant's products were used. These are mainly the central regions and southern Russia, this is due to the location of the plant.

Not a single new building will last even ten years if it was built without the use of thermal insulation materials. Thanks to them, maximum heat savings are achieved, the absence of drafts and “cold bridges” inside the walls, and the service life declared by the manufacturers allows you to forget about major repairs of the building for decades.

THERMAL INSULATION ISOVOL BASED ON BASALT FIBER

IZOVOL insulation is produced at the Belgorod Plant of Thermal Insulation Materials (BKTM), a new plant with 100% Russian capital. The plant was built and put into operation in 2005. A thorough analysis of the use of thermal insulation materials in the global construction market, the use of the latest scientific developments in the field of insulation production made it possible to create and put into operation a unique technology for the production of high-quality mineral wool insulation, which, today, has no analogues in Russia. Thermal insulation under the IZOVOL trademark is a new generation of natural non-combustible basalt insulation. IZOVOL mineral wool production technology is highly efficient and does not pose a threat to humans and the environment. This technology involves the use of a unique melting device, which allows you to obtain a melt of the highest quality, due to which IZOVOL insulation has one of the best physical and mechanical properties. When producing IZOVOL insulation, the Belgorod plant uses its own know-how, which allows us to eliminate blast furnace slag and coke from production, so the resulting mineral wool basalt insulation is completely safe for humans, does not pose a threat to the environment and is fundamentally superior to most thermal insulation materials offered on the market. MAIN ADVANTAGES OF ISOVOL INSULATION Low thermal conductivity The specific production of Izovol thermal insulation materials allows us to produce products with a thinner average diameter of basalt fibers, which significantly improves the thermal insulation characteristics of the insulation.

Hydrophobicity. Thanks to special moisture-repellent additives, the moisture absorption level for Izovol mineral wool is less than 1% by volume. This indicator guarantees the constancy of the declared thermal conductivity characteristics of the materials and increases the durability of both the insulation and the insulated structure.

High vapor permeability Thanks to the vapor permeability coefficient close to 1, the existing excess moisture can easily migrate through the thickness of the Izovol insulation and evaporate from the surface, keeping the load-bearing structures in a stably dry state. Fire resistance Thanks to the base - basalt fiber, all Izovol thermal insulation without decorative coatings belongs to the class of non-combustible materials, and in some structures it serves as a fire retardant layer, providing the structure with the required fire resistance limits. Sound insulation Thanks to its fibrous structure, Izovol insulation well prevents the propagation of sound waves, ensuring a comfortable stay in the premises.

Disadvantages of thermal insulation material

Alas, even isobel is not without its drawbacks, although there are not many of them. These include:

• the possibility of loss of thermal insulation properties in the places where the plates are joined or in the area of ​​contact with the sheathing (the joint is not sealed with sealant or foam, like polystyrene foam);
• an additional waterproofing layer is required, since if there is direct contact with water, the slab will swell and cease to be useful;
• a sheathing of a certain size is required (according to the dimensions of the izobel insulation boards);
• the process is complicated by the use of a mask, gloves and clothing covering the skin; otherwise, small particles falling off the slab will land on the skin, causing allergies or scabies.

Despite the minor disadvantages of isobel, the material is still recommended for use in almost any room. It is available, it is easy to cover an area of ​​the house with it, and the next replacement of insulation, if the installation technology is followed, will not have to be done earlier than in 50 years. When purchasing the material, the consumer will save a good amount, and during operation he will be convinced of the right choice.

Features of production technology

The Izovol company's product range includes basalt insulation - slabs, rolls, foil mats.
Izovol insulation is made from mountain basalt rocks. Modern equipment that meets state standards is used for production. First, the rock is melted to a liquid state in gas melting furnaces, which ensures the high quality of the resulting material.

The fibers undergo a centrifugation and blowing procedure, which makes it possible to achieve the correct shape of the insulation and its uniform density over the entire area. Air gaps remain between them, so the appearance of cold bridges is excluded. Mineral wool feels soft, hard or semi-hard to the touch. The material production process is fully automated.

Technical characteristics of Izobel thermal insulation

In the red package, the mineral wool density is 35 kg/m. cube

In principle, Isobel insulation is practically no different in technical characteristics from any other basalt thermal insulation. Despite the desires of each manufacturer to somehow distinguish their product from many competitors, the essence remains the same and Izobel insulation is no exception. The only thing that distinguishes it is its low price.

The cost of any stone wool depends on its density. Izobel thermal insulation in green packaging is the cheapest, as its density is only 25 kg/m. cube But Isobel P 75 has a density of 35 kg/m. cube, it comes in red packaging and is more expensive.

Isobel insulation, characteristics:

• flammability degree NG - does not burn;
• humidity of the supplied material (from its own weight) – 0.5%;
• ability to pass steam – 0.3 mg/m*h*Pa;
• thermal conductivity lambda – 0.036 W/m*K;
• moisture absorption - 1.5% per day when completely immersed in water.

The dimensions of the slabs for all Izobel thermal insulation lines are standard and are 1000x600 mm. Insulation with a density of 25 kg/m. cube (in green packaging) is available in thicknesses of 50, 75 and 100 mm, and the material has a density of 35 kg/m. cube (in red packaging) – only 50 mm.

Thermal insulation is only suitable for interior work. The lathing is needed so that Isobel does not sag under its own weight. According to the standard, when installing light basalt wool on the sheathing, horizontal strips are installed every 3 m. In this case, the laying step can be reduced to 2 m.

Despite the fact that the material is treated with water-repellent compounds during the production process, it still needs to be protected from moisture using films. For different types of work, waterproofing and vapor barrier are used. We described how to properly install waterproofing in one of the previous articles.

Main technical characteristics of ISOVOL products

Since ISOVOL insulation illustrates the technical characteristics on each package of the material, the buyer can independently, without the help of a consultant, select the most suitable type of heat insulator.

All ISOVOL materials are characterized by the following properties:

• stone wool (as IZOVOL products are sometimes called) absorbs noise and blocks the transmission of vertical sound waves;
• The environmental friendliness of the product allows it to be used in almost any work;
• ease of installation ensures a quick process of insulating residential buildings;
• a high level of fire resistance is very important when using materials in facilities with chemical compounds or explosive substances;
• the thermal technical efficiency of materials is formed due to low thermal conductivity (thermal resistance is achieved by creating a wall made of wood (0.25 m thick) or sand-lime brick (2 m thick));
• the service life of ISOVOL products reaches 50 years;
• resistance to acids, alkalis and solvents increases service life (this property also helps to avoid corrosion);
• The property of double action vapor permeability contributes to the rapid removal of all moisture from the room and evaporation from the surface of the material itself.

See more on this topic on our website:

1. Insulation Rockwool technical characteristics Thermal insulation materials produced by Rockwool have long been noticed by professional construction companies. ROKVUL insulation has outstanding technical characteristics, which explains its widespread use: in civil,…
2. Extruded polystyrene foam - reviews and technical characteristics of PENOPLEX Extruded polystyrene foam is a very popular product in the building materials market. The qualities and properties of this material are recognized as truly unique, as they make it possible to lighten the building structure...
3. PAROC insulation - technical characteristics and reviews about insulation. Production facilities of the PAROC brand are available in Sweden, Finland, Lithuania and Poland. Official representative offices from which you can purchase PAROC insulation (technical characteristics and properties are…
4. Isorok insulation - reviews and technical characteristics of insulation The ISOROK company produces a large list of thermal insulation materials intended for use in a wide variety of places in buildings and structures (in walls, ventilation shafts, various floors, roofing, pipelines...
5. ISOBEL insulation technical characteristics and reviews from home owners ISOBEL insulation is a new productive material that is produced using innovative technologies using the latest foreign-made equipment. It is created on the basis of mountain basalt rocks. ISOBEL insulation,…

What types of Izovol are there?

Each type of insulation has its own characteristics and dimensions. The following describes the parameters of the most commonly used models.

Isobel

The density of such slabs is 25 kg/m3, in some models - 20 kg/m3. They are used on non-loaded inclined structures and on horizontal surfaces (floors on joists). At full immersion, volumetric water absorption is 1.5% and thermal conductivity is 0.036 W/mK.

Izovol ST

The mats are made from thin basalt fibers. They vary in their density. There are models with rates of 50, 60, 75 and 90 kg/m3. Water absorption of this material is up to 1%.

It is used for floors, sloping roofs and interior partitions. All insulation dimensions are indicated on the manufacturer’s website. This model has dimensions 100*60 cm.

Different thickness of insulation

Isovol B

This model is specially designed for insulation of ventilated facades and is finished with fiberglass. It contains a protective layer that prevents the basalt wool from being blown out and plays the role of wind protection. The density of this material is 50, 75 or 90 kg/m3. In addition to thermal insulation, it provides sound insulation and fire safety. Like all other types of Izovol, it has a flammability class of NG, that is, not flammable.

Plaster facades

Izovol F

It is used as a heat-insulating layer in façade systems with a plaster layer, and as fire-resistant cuts in structures using expanded polystyrene. The thickness of the material ranges from 4 to 25 cm. Isovol F has dimensions of 100*60 cm. The slabs are produced with a density of 100 to 150 kg/m3. They have high strength, water absorption at full immersion is 1% and thermal conductivity is 0.036-0.040 W/m K.

Izovol K

This model is used for insulating flat roofs, as a filler in reinforced concrete wall panels. One option for roof insulation is a two-layer system. If the first layer has a thickness of 10 cm or more, in this case it is best to use Isovol K. It is best to choose Izovol KV as the top layer.

A distinctive feature of this insulation is its almost square size: 100*120 cm - you can quickly cover large areas. This material has a density from 100 to 175 kg/m3. The thickness of the slabs ranges from 4 to 25 cm.

Thermal insulation of flat roofs

Izovol KV

Such slabs are used in single-layer and two-layer roof insulation systems. In the second option, a combination with Izovol K is used, it is placed on the bottom layer. If the thickness of the thermal insulation layer must be large, two layers of insulation are used. The advantage of this insulation is its increased rigidity and moisture resistance. This allows the material to be used for existing roofs. Such slabs perform not only thermal insulation, but also fire-fighting functions.

Izovol is a safe and reliable environmentally friendly non-flammable heat insulator

Izovol P

This material is used for thermal insulation of floors before concrete screeding, for flat roofs, as well as other areas with high humidity. Isovol P with a density of 175 kg/m3 can withstand a load of no more than 65 kPa, while the insulation does not deform. When using material with a density of 100 kg/m3, a load of up to 35 kPa is allowed.

When insulating the floor, the material has a soundproofing and fireproof effect. It is used to create heated or floating floors. Izovol P has standard dimensions of 100*60 cm. Other characteristics are similar to other series of material.

Izovol L

This model is used in various areas of insulation, horizontal and vertical. It is used for roofing, interior partitions, and attic floors. One of the special areas of application is the insulation of heating and ventilation systems, pipelines and refrigeration units.

Density and dimensions

Special materials are used to insulate rooms. Thermal insulation of the Izovol brand is one of the most popular products in its category. Izovol products should be selected taking into account the technical parameters of a particular room, since they may have different thickness, density and operating temperature conditions. The thickness of the material also plays a big role, since the density depends on it (density can range from 40 to 80 kg/m³).

Izovol acoustic

Isovol acoustic has high sound insulation properties and good thermal conductivity, which allows you to reliably isolate the room from extraneous noise and cold. The material has excellent acoustic parameters and is not subject to combustion. It can be used in children's rooms. Izovol room insulation reliably protects rooms from cold and noise up to 500 Hz.

Izovol ST

Izovol brand ST is presented in different versions of plates, which are made from thin mineral fiber. Due to this, the material is easy to use and lightweight. The most effective and frequently used is Izovol ST-50. The series also includes other slabs with different densities.

Mineral wool Izovol ST series is used in the construction of ventilated facades, in which empty space must be left between the layer of mineral wool. The slabs are also indispensable for insulating walls, partitions that do not bear significant loads, floors and ceilings, attic floors, and roofs.

Izovol insulation is available for sale in different series. This material has high performance indicators and is suitable for solving problems of varying complexity. Each brand has certain technical features and characteristics that determine its scope of application.