Remote control system for heating a country house, cottage or cottage.

The world of new technologies is constantly improving. What seemed unreal yesterday becomes obvious today. The old stoves laid by our grandfathers are gradually forgotten. They are being replaced by innovative heating systems called smart ones.

They can be controlled remotely using gsm for the gas boiler and your own smartphone. New opportunities, reliable ways to achieve significant savings in gas consumption, comfort and safety of your own home. These are just some of the benefits for those who use such innovative solutions.

We also recommend reading: How to save on gas consumption when heating your home

Which heating systems can be controlled remotely

Not all gadget owners prefer to use them to their full potential. Only pragmatic homeowners control their household appliances using buttons and programs of their own equipment. Controlling a gas boiler via a smartphone or other device is much more efficient and convenient.

This kind of communication with technology can be carried out while being far from home. It is enough to send a command and instantly receive a report on the work done.

Not all equipment is subordinated to the GSM module for the heating boiler. But, having such an expansion and an improved boiler, you can get a number of characteristic advantages:

• significantly increase the operating cycle of the boiler and the entire heating system;
• in the event of a long absence of residents, ensure an economical mode and start optimal heating in order to return to a warm home;
• when installing outdoor (weather) sensors, equipment control is reduced to a minimum, so temperature control is carried out automatically;
• it is possible to set the optimal mode from a distance;
• in the event of an unforeseen emergency situation, the owner receives an SMS report on the state of the system and can take the necessary measures remotely;
• the ability to control not only the heating boiler itself, but also its branched system (warm floors, radiator or convector heating).

This is only part of the advantages of such boilers, which are included in the general concept of “smart home”. The possibilities of remote control are not limited to just the boiler.

Control controller malfunctions

To avoid malfunctions resulting from malfunctions in the remote control system, it is recommended to periodically inspect the device. Such a check must be carried out in case of receiving false signals about the activation of a warning alarm, deterioration in signal quality, an increase in the signal arrival time, or receiving erroneous data.

The following malfunctions may be the cause:

• external damage to the controller body;
• broken wiring from sensors;
• insulation damage;
• break of the grounding circuit.

It should be remembered that the inspection is carried out under the condition that the electrical power from the device is disconnected. Violation of safety rules can lead to irreversible consequences.

What are gsm modules for heating boilers

This is a small device with which you can control a gas boiler from your phone.

A kind of laptop computer with a specific set of functions:

• control of ambient temperature and coolant;
• notifying the owner via SMS messages about the operation of the system and possible failures;
• an increase or decrease in the temperature of the liquid transported through the system;
• installing the system to operate in economy mode;
• remote switching on/off of the boiler;
• remote adjustments from a smartphone to previously set parameters.

Purpose and scope

The GSM module is a kind of multifunctional switch. You can connect not only a gas boiler to it. He is able to control/change, with the help of a person and his phone, the operation of all components of the heating system:

• heating radiators separately in each room;
• heated floor system;
• hot water supply.

The system is compatible with all energy-dependent gas boilers with automation. The temperature controller in all models is used as a regular sensor.

What is included in the gsm kit and basic principles of operation

The device itself, with a compact size display that does not require much space during installation, is supplied as a kit, which includes:

• controller with module and power supply;
• antenna for signal transmission;
• a battery that ensures operation in the event of a power outage;
• key reader;
• temperature sensors.

If necessary, the customer can arrange several more options:

• additional sensors;
• an informant capable of signaling a gas leak, a motion or burglary sensor, a fire alarm;
• gate opening kit;
• master key;
• microphone and much more, which significantly expands the functionality of the device.

Control Features

Each model is limited in functionality. But this is enough to be able to control the operation of the heating system from anywhere in the world where there is an Internet connection.

The controller itself has a SIM card that is configured to receive/send messages. In order to activate the main option, the required coolant temperature is set on the control unit. For example, 40 degrees. When the temperature reaches the set parameters, a message will be sent to the owner’s phone.

The advantage of remote control is that you can set the optimal parameter long before you return to the house. Everything happens automatically.

Remote control of the boiler room using a GSM mobile phone

What to do if there is no wired Internet in a country house? How can you control the heating in this case?

Yes, it’s very simple - using a special GSM module and, of course, a mobile phone. In fact, the GSM module plays the role of your personal assistant - you called it, gave a command, for example, to heat it hotter by a certain time in advance - and the whole family will arrive in a warm and cozy home. Or, on the contrary, you forgot to turn down the boiler power in the morning when leaving for work - no question, you can do it right from work, via the Internet or directly from your smartphone while you are still getting to work. A GSM module is a compact device with its own SIM card from any operator (it is important that it provides reliable signal reception in a given area), allowing you to control the indoor climate from any phone (satellite, mobile or fixed line), tablet or PC.

The undisputed leader in the GSM thermostat market is currently the Russian company MicroLine. The company produces a wide range of GSM modules for remote control of heating boilers, including multifunctional controllers that provide control of the most complex heating systems. You can buy it in the GSM heating control on our website.

Full list of boilers compatible with ZONT thermostats

Depending on the settings made, your phone will receive either short SMS notifications with various information and instructions for changing the settings of the heating boiler, or telephone calls with various information about the operation of the heating system. A special mobile application is installed on the phone (there are versions for Android, iOS, and Windows Phone), which allows direct remote control of almost all parameters of the heating boiler. A GSM heating control module is essentially a computer connected to external sensors and capable of changing the operating modes of the heating system. Naturally, the module must be located in the area of ​​reliable reception of mobile operators.

The GSM module for the ZONT H-1 heating boiler is a very interesting and inexpensive solution from the Micro Line company, which previously specially manufactured this device for the Evan company, which produces heating boilers. Let us immediately note that Zont H-1 GSM is suitable not only for Evan boilers, but, practically, for any heat generators that have the appropriate terminals for connecting a room thermostat!

Attention!

GSM modules, depending on the tasks assigned to them, use mobile Internet traffic in their work (approximately 60-100 MB per month), so it is very important to monitor the balance , and it is best to use unlimited tariffs from cellular operators.

GSM modules, as a rule, use cloud services in their work, so you will always have the opportunity to control or change the operating parameters of the heating system via the Internet (that is, without sending control SMS or phone calls), using a tablet, personal computer or smartphone, by going to the module manufacturer’s website using your username and password.

The GSM heating control module can operate in several modes:

• automatic, when, based on signals from installed sensors, the controller supports specified modes according to a given program;
• SMS heating control, when the heating system is controlled by sending SMS. In this case, when new data arrives, for example about room temperature, the controller accepts it for execution and begins to support it automatically;
• warning, by sending alarm messages about the current condition of the house (gas leak, break in the water supply system, etc.);
• remote control of other devices connected to the GSM module (watering, lighting, alarm, etc.).

GSM – heating control allows you to remotely:

• receive room temperature reports;
• receive notifications about the current state of heating equipment;
• change the operating mode of the system, increasing or decreasing the temperature, including separately in each room.

Heating control is not limited to these functions. In principle, any heating system can be converted into a remote one. To do this, it must have an automatic operating mode, and a special GSM controller must be connected to it to control the heating and communicate with the subscriber.

Is this not enough for you? Then look at the capabilities of multifunctional GSM controllers , for example: ZONT H-1000 , ZONT H-2000 or ZONT H-2000+ The devices are complex and require professional knowledge during installation and configuration, so installation requires only highly qualified specialists - contact our company, they will we have! Their capabilities are certainly enough to control the most complex heating systems.

I would like to draw your attention to an extremely useful and convenient function of the Zont H1000+, H2000+ and C2000+ controllers. This is support for working with scripts , the creation of which is available in the settings menu of the Zont application. For example, to save energy resources, when leaving home, a special button in the application (or specially installed in the house) is pressed and the system performs a pre-configured sequence of actions: ● switches the heating system to economy mode; ● turns off electrical outlets other than those required; ● turns off the lighting in the hallway after 30 seconds; ● close the curtains; ● activates the security mode after 30 seconds.

Another example. During vacation, you can program similar actions, but with a longer validity period. can be used to protect against intrusion into the house , or in the event of an emergency, fire alarms, control of water, gas leaks, etc. can be activated. You can simulate the presence of residents in the house - lights and music will be turned on periodically, curtains will be opened. Agree, this additional protection may well deter robbers. Operating principle: a sensor configured to trigger in a specific situation triggers the controller, which activates some action. For example, a triggered water leakage sensor will activate turning off the tap, and the controller will notify the owner about the incident. To increase comfort, for example, in the evening the temperature in the bedroom decreases for a comfortable sleep, and in the morning it increases, the curtains open, the water heating in the bathroom turns on, the car will be warmed up by the specified time (if you additionally use the ZONT car alarm), in winter you can periodically start heating porch to remove ice. For children, you can provide for the operation of the TV and computer for a strictly limited time; on Friday, before the owners arrive, the water in the bathhouse will be heated, the pool will be filled with water, the lighting in the area will be turned on, the gates will open, etc.

Creating a script for ZONT controllers

• Show all
• Creating a script for zont controllers

• Creating a script for ZONT controllers

Program different scenarios yourself depending on the tasks and equipment used, the number and level of complexity is not limited!

Functionality of the Zont C2000+ controller

• Based on the controller, you can create security, monitoring and automation systems for a wide variety of objects, buildings and structures. The variability of the communication channels used and the flexibility of settings provide “smart” control of any electrical equipment.
• Control and management via the Web service www.zont-online.ru and the Zont application for iOS and Android mobile devices;
• Control and monitoring of the status of sensors for various purposes and electrical appliances connected to the device inputs;
• Monitoring the ambient temperature through digital and analogue temperature sensors;
• Generating an Alarm signal and sending notifications when the state of controlled sensors changes;
• Control of electrical appliances connected to the device outputs both by event (triggering of controlled sensors), and by time, schedule or direct command of the owner, temperature and programmable scenarios;
• Monitoring of wireless sensors for various purposes via a built-in radio channel at a frequency of 433 MHz and a connected radio channel at a frequency of 868 MHz (only for radio channel equipment manufactured by Micro Line);
• Remote configuration of the monitoring and control algorithm without physical connection to the device (via the web interface);
• Graphic display of the dynamics of changes in operating parameters of systems, electrical appliances, the state of controlled inputs and controlled outputs.

Some features of the H-2000:

• Control of 2 boilers in cascade. Work according to a schedule: one boiler works during the day, another at night.
• Control of the boiler and 11 heating pump circuits. The boiler turns on when heat is requested from any circuit.
• It is possible to control 3-way valves (maximum number of 3-way valves: H 1000 - 3 pieces, H 2000 - 6 pieces)
• The presence of 6 inputs, to each of which you can connect various sensors: security, fire, leaks, water pressure sensors and gas pressure switches, as well as any sensors that operate to open/close a contact.
• Remote control of heating and air conditioning, remote fault reset, etc.

What are the differences between the Zont H-2000+ controller and the H-2000?

• Number of controlled heating circuits: unlimited (H-2000 has 6)
• Number of controlled heat sources (cascade of boilers): without restrictions (H-2000 has 2 of them)
• Support for ZE-66 expansion units: yes (H-2000 does not have) 1 expansion unit - this is additional: - 6 universal outputs, - 6 relay outputs, - input for digital wired temperature sensors, - input for 868 MHz radio module
• Supported wired temperature sensors: digital DS18S20 and analog NTC (H-2000 only has digital DS18S20)
• Maximum number of temperature sensors used for control (wired and radio): no restrictions (H-2000 has 10)

Remote control of the boiler using a set of equipment with an Internet gateway

Now let’s consider the option of remote heating control, if your country house or dacha has the Internet and, naturally, a Wi-Fi router (aka router). Everything is much simpler here - you can look at the capabilities of the devices proposed below and forever forget about worries about the state of the heating system of your home.

You can buy a modern wireless internet thermostat Salus IT500 on our website

Salus IT500 provides control and adjustment of operating parameters in a maximum of two heating zones, for example, in the 1st room on the first floor of the cottage and the shower room on the second floor. The kit includes an actuator (boiler receiver), a room 2-channel thermostat (weekly boiler programmer, boiler control panel) and an Internet gateway connected to the Internet router (router).

iT500 Features:

• control of heating modes only (boiler and, if necessary, pump);
• control of multiple heating zones;
• control of heating and hot water supply of a country house.
• maintaining different temperatures in different rooms, scheduling temperature conditions by day, hour and minute
• 6 preset heating modes on delivery
• hot water heating control, automatic control modes, including energy-saving and holiday mode.
• a unique system for connecting devices via the Internet, providing reliable connection and control of the heating system: smartphone (or personal computer) -> Internet server -> router (router) -> thermostat -> receiver -> boiler

All equipment is wireless and communicates with each other via a radio channel, i.e. There is no need for electrical wiring. The room thermostat for the heating boiler is programmed for daily, weekly or 5+2 operating modes. The thermostat screen and applications for remote heating control display the current state of the boiler, the current temperature and the set one. Setting the operating schedule can be done from the thermostat panel, through an Internet browser or using a mobile application. The thermostat has a modern design and is highly reliable and safe to use. Using additional Salus Controls equipment, it is possible to control, including remotely, heated floors, gas and electric boilers, oil heating systems, as well as almost any other heating systems and devices. Remote control does not require a dedicated external IP address, the entire system works perfectly on any mobile Internet (Yota, Megafon, Beeline, etc.), control is also possible from computers and mobile devices on Android and iOS operating systems.

What to do if there is no wired Internet in the house, but you have already purchased a Wi-Fi Internet thermostat?

Most likely, the dacha has coverage from mobile operators, isn’t it? So you also have the Internet! Just buy a Wi-Fi router with a USB port and, in addition to it, a 3G or 4G modem. Install a SIM card from any mobile operator into the modem, providing a reliable signal in the area where your home is located. You insert the modem itself into the USB connector of the router and that’s it - now you have the opportunity to control the heating of your dacha remotely!

If the iT500 seems a little expensive for some, the company offers a more budget-friendly solution - the Salus RT310i . The thermostat has somewhat reduced capabilities compared to its “big brother,” but may turn out to be a worthy replacement for it, thanks to the lower price of the kit. Externally, the RT310i looks more modest compared to the first-class high-tech design of the iT500; it lacks touch controls, but in terms of functionality the models are almost identical. Except that while the iT 500 is capable of controlling 2 zones of heating or cooling, the RT310i can only control one zone.

Missing the iT500's features?

No problem - Salus iT600 can do everything and even more! If you lack the functionality of the iT500 to control only two heating zones, then our website presents a more functional multi-zone (there are wired and wireless versions) Salus iT 600 Smart Home . Indeed, its capabilities for remote heating control (and more!) are enough for even the most demanding consumer!

iT 600 Smart Home combines the ability to control warm water floors, remote control of heating using thermostats, unified switching at the “smart home system” level, changing the temperature in each room using a smartphone with Internet access, control and management of any electrical appliances in home, connecting window and door opening sensors and many other functionalities. The system was far ahead not only of its competitors in the field of remote heating control, but also set the trend in the field of automation and dispatch of engineering systems for many years to come!

More information about the capabilities of the system can be found in the article: Smart Home. Heating control system SALUS iT600

Attention!

The new line of Salus iT600 Smart Home products is already on sale! Now you can not only control heating remotely, but also protect your home and control electrical appliances!

Buy heating control system SALUS iT600

Now you have the opportunity to buy Salus iT600 Smart Home - a new line of automation for the Smart Home! This is the same full-fledged system for remote heating control via the Internet iT600 plus additional features:

• the use of the universal Internet gateway Smart Home UGE600, which now supports up to 100 wireless devices on the ZigBee network and is used to replace last year’s version of the Salus G30 gateway.
• control and management of various electrical appliances connected to Salus SPE600 smart sockets with the ability to meter consumed electricity
• connection and control of security alarms using wireless door or window sensors Salus OS600 Door Sensor
• managing your system has become even more convenient thanks to the new Salus Smart Home application for smartphones on iOS and Android, the interface of which and device registration have become much simpler and clearer!

All components of the system are wireless devices operating in the modern ZigBee home network standard; now you can create separate groups of devices that work together and to which individual tasks can be assigned.

In the future, the company's engineers intend to expand the capabilities of the smart home control system, but now you can buy Salus iT600 Smart Home, starting with the essentials, and build your own Smart Home at a very attractive price!

Is it possible to remotely control heating via GSM and Wi-Fi?

Progress does not stand still and a number of companies are already offering thermostat models on the market with the possibility of combined control. For example, let's briefly consider the Zont Climatic automatic regulator model. ZONT Climatic is one of the new models from MicroLine for comfortable control of a multi-circuit heating system. The automatic controller can control 2 boilers, which can operate using both the same and different digital buses: OpenTherm, E-Bus or Navien.

ZONT Climatic is one of the new models from MicroLine for comfortable control of a multi-circuit heating system. The automatic controller can control 2 boilers, which can operate using both the same and different digital buses: OpenTherm, E-Bus or Navien.

What are the main features and advantages of ZONT Climatic?

• The thermostat is completely ready for installation, all in one housing.
• Weather-compensated control
• No need to buy intermediate relays - the power part is included.
• The thermostat housing can be mounted directly on the wall
• Digital bus cards are purchased depending on the specific needs of the owner and are easily mounted inside the case.
• The pumps and servos of the three-way valves are connected directly.
• Configuration and control are carried out from the instrument panel (can be moved to a convenient place) or remotely via GSM channel or Wi-Fi.

More details can be found on the pages of specific ZONT Climatic 1.1, 1.2, 1.3

What should owners of outdated heating systems do?

Tech WiFi 8S is one of the newest and most functional models of thermostats from the Polish company Tech Controllers (the Polish version of the name Tech Sterowniki), on the basis of which you can build a multi-zone radiator heating control system for your home. For example, in a country house or country house, the heating system was installed many years ago. Naturally, a distribution comb was not provided, there are no three-way mixing valves, and there is, in principle, no way to control anything. Until recently, the only way out of this situation was to install mechanical thermal heads on radiators. This solution has the right to life, but, firstly, the accuracy of temperature control is several degrees, and secondly, it is necessary to adjust these same thermal heads on each radiator separately, in the morning and in the evening. It's troublesome and inconvenient. Fortunately, electric thermal heads with high measurement accuracy have appeared on the market. Tech Controllers goes even further and offers you an entire system that controls battery-powered thermoelectric servos via your home Wi-Fi network according to specified settings. And now even owners of outdated heating systems have the opportunity to live comfortably!

Tech WiFi 8S can control the temperature in 8 rooms, each of which can have up to 6 thermal drives! In addition to controlling thermoelectric actuators, the controller can also control the boiler: when all rooms reach the set temperature, it will turn off the boiler using a “dry contact”.

Buy heating control system TECH WiFi-8S

How to choose a gsm module: what you need to take into account

Before choosing a modular system for controlling a gas boiler, you need to study the models presented in the catalog and their technical characteristics.

Also consider several important parameters.

1. A control method that can be carried out on the touch panel or via SMS. Many models already have software that allows you to quickly configure and manage.
2. Complete set of the selected model. It is usually standard, but it is better to supplement the controller with additional options. This will allow you to control the level of gas pollution, possible leaks and even protect the house from vandals.
3. Regulation channels. The more there are, the higher the functionality of the device, since it is possible to connect many additional functions.
4. Microprocessor. The best models have weekly control programmers.
5. High capacity battery that ensures continued operation in the event of a power outage.

Important! When choosing gsm modules for a heating boiler, you must take into account the recommendations of the heating system manufacturer.

If something is not clear, you can consult a professional directly on the site.

Heating control algorithm in a separate zone

• We measure the air temperature in the controlled area.
• We compare the measured temperature with the setpoint for this zone. If the measured value is less than the setpoint, then we open the zone circuit drive and send a heat request to the boiler, otherwise, we close the zone circuit drive and remove the heat request for the boiler.

This is the simplest control method (on/off). Instead, a PID controller with a discrete output (the so-called slow PWM) can be implemented. It must be borne in mind that the average opening and closing time of a thermoelectric actuator is about three minutes. Therefore, the PWM frequency should be less than 10 clock cycles per hour (usually the cycle period is 10 minutes).

The best devices in terms of price-quality ratio

Given the increased demand for modules for gas boilers, you should not focus only on their cost. Great demand always activates scammers. The likelihood increases that a cheap analogue was produced in one of the basements of the Middle Kingdom.

There are many well-known brands, as well as companies with less sonorous names, that supply the market with high-quality, certified equipment. The presence of a certificate and guarantee is the key to the reliability of high-quality equipment.

Among the most reliable companies offering modular systems at an affordable price are the leaders:

• Vaillant;
• Micro Line;
• Viessmann;
• Buderus;
• Proterm;
• Telemetrics;
• Xital;
• Evan.

Zont h 1v

Among the popular budget models is the GSM zont h1 module produced by Vaillant. This is a small thermostat for connection to a heating boiler.

Equipped with its own SIM card slot and control panel. Receives commands from any smartphone, tablet or desktop computer. There is an anti-freeze system in case the residents of the house leave for a long time. During the entire period of their absence, the system is under reliable protection; its defrosting is excluded even in high frosts.

Protherm

Another popular boiler model is Protherm. The cost of modules of this brand is even lower than the previous ones. Compatible with boilers of the same name. Can work with models from other manufacturers. It has fixed modes - economy and comfort. Independently monitors temperature indicators. Adjusts the operation of the heating system based on previously set parameters. Notifies the owner in the event of dangerous or unusual situations. Compatible with other sensors. Monitors movement, smoke or gas leaks. The owner is immediately notified about this.

BoilerOk

Budget, but quite functional model. The remote control module allows you to set up the system in just one minute. To set up, you only need to make one call to the SIM card included in the module. The kit includes only one temperature sensor with the ability to connect one or more analogues. In automatic mode, it saves the specified parameters for a week and notifies the owner in case of unexpected failures for timely remote solution of problems of any complexity.

Evan gsm climate

The module is designed for remote control of boilers and heating systems. It is possible to use it to create a comfortable temperature for each room separately and regulate the floor heating system. Remote weekly adjustment for optimal gas and electricity consumption. It also monitors the technical condition of the boiler and the entire system, notifying owners about possible problems and methods for eliminating them.

Telemetrics t3

The model allows remote control of the boiler using a smartphone. For its optimal operation, one indoor sensor and one outdoor sensor are sufficient. In case of malfunctions in the operation of the boiler or failures/outages of the electrical network, the owner instantly receives a message with suggested options for elimination.

Smart sentry 4

A portable, pleasantly designed module is designed for remote control of a boiler or heated floor. Maintains optimal temperature conditions according to preset parameters. Control is carried out remotely using your own smartphone. Equipped with an emergency warning system in case of unforeseen situations. The built-in microphone allows you to monitor the situation in your own home when the owners are away.

Xital gsm 4t

A ready-made solution for constant control of temperature, voltage, pressure in the heating system. Set up quickly using SMS alerts. Compatible with various gas and electric boilers.

Features of operating a heating device with GSM control

The device interface is simple and clear; it can be used to set the following operating modes:

• disabled;
• comfort;
• economy

When the weather changes, the user of the gsm module can remotely change the air temperature in the entire house using a special application on the tablet (phone).
In particular, users note the convenience of turning on the boiler and increasing the temperature of the working fluid some time before coming home. To do this you need:

• send an SMS message with the required command (that is, you need to turn on the boiler);
• set the desired temperature.

All necessary commands will be transmitted by the controller, taking into account the received settings and temperature sensor data.

Video - Why do you need a GSM module?

DIY instructions for connecting a gsm module to a boiler

Our country has been famous in all centuries for its own Kulibins. Connecting a modern module for a heating system is not difficult for them. Although manufacturers recommend doing this with the help of professionals. But the kit must include instructions for installing and servicing the modular system. Despite its small dimensions, this is a complex innovative system that requires a special approach during installation.

Self-installation will lead to the fact that the system simply cannot cope with the tasks assigned to it. But it’s quite possible to launch it yourself. To do this, just follow a few simple steps:

• install sensors and connect them to the module;
• Install a SIM card into your smartphone and enter the security code;
• install the SIM card into the module and repeat the code entry;
• Dial your phone number on the device.

Send the code from your phone to the module, after which all the necessary information will be sent to your smartphone.

Installation cost

The cost of installing and configuring a GSM system is 6,000 rubles

This amount includes all work and transportation costs for installing the equipment.

Standard system equipment:

• Central GSM monitoring and control unit EctoControl – 1 piece;
• GSM antenna – 1 piece;
• External battery – 1 piece;
• Instructions;
• User guide;
• Warranty card.

The cost of connecting additional sensors is 500 rubles per 1 sensor.

How a homemade heating boiler control system works

Before starting, you must insert the plug into the socket and wait until the indicator lights up. Activate launch using a special option on your smartphone. After this, the corresponding image will appear on the sensor.

The monitor will display the control zone - room temperature, coolant and humidity. At the bottom of the screen you can activate automatic control of the boiler. The large button in the center is designed to turn the boiler on/off and adjust its power. If you activate the automatic mode, then a form will appear where you need to enter the desired parameters for the room temperature and coolant. Click OK and complete the setup.

Completeness of the module and its appearance

The GSM module we are talking about in this article can have both basic and advanced configurations. The choice of one or another of them depends, first of all, on the model and the wishes of the client.

Prices for GSM module

gsm module

Cellular system for monitoring the heating system via SMS “Xital”

So, the basic kit consists of:

• GSM controller , which is equipped with a cellular communication module. It has a slot for a SIM card (or two), as well as a port for external devices;
• a key reader (both main and additional), limiting access of third parties to the equipment;

Touch memory electronic key reader in the Xysal GSM module model. Used to protect against unauthorized intervention in boiler control

• individual antenna that maintains constant communication and amplifies a weak signal. The antenna can be installed in any convenient place;
• sensors , the number of which depends on the client’s personal requirements. In the basic configuration, as a rule, there are only two of them;

Standard type of heat sensor (outdoor and room) for regulating temperature indicators in the entire house or in certain rooms

• battery with power supply . Thanks to this, the module functions during power outages. When the external source is turned off, the power supply turns on.

Heating and air conditioning control
You can also purchase an extended package, which, in addition to all of the above, will include:

• auxiliary temperature sensors (maximum - 10 pieces, the exact number depends on the specific model);
• microphone , which is connected to the module via an interface. Thanks to the microphone, you can listen to your home remotely;
• sensors for water flow, ignition, smoke, entry of strangers into the house;
• equipment for opening entrance gates (for example, an electric motor, the required automatic devices, a gearbox).

Modes of equipment use

Important information! Externally, this is a compact device with a display and LED indicators. There are connectors on the side to connect external devices, and there is a controller inside the device. The power supply has a separate housing and is connected to the module using a special cable.

Video - About remote heating control

Control options via smartphone

You can control the operation of the module in several ways.

Connecting a gsm module for a gas boiler

This is done through the use of a special thermostat connected to a wireless connection to the Internet via wifi. Difficulties may arise due to failures in the work of the provider, power outages, the model of the boiler itself and, possibly, personal financial capabilities.

The boiler has or is equipped with an additional special sensor (control unit), which is pre-programmed. To control, you need to communicate with a laptop, computer or smartphone with a special application that is designed for various operating systems:

• Android;
• iOS;
• Microsoft Phone.

There are several options for controlling a gas boiler via GSM:

• automatic, not requiring human intervention;
• transmission of alarm signals via SMS signals in the event of dangerous or emergency situations, setting is carried out in advance on the gas boiler control unit;
• transmission of SMS commands that the automatic boiler system can recognize;
• direct control via the gsm system, which is connected to the unit.

The advantage of this remote control of a gas boiler is that its operation is constantly monitored, regardless of the distance of the owner. Moreover, you can control the operation of the system from several phones.

Remote control via the Internet

If the building or apartment has a fixed connection to the Internet, remote control can be carried out using the paid services of the provider. It is important that the connection in the home is made using a wifi router. If the room temperature drops below the previously set parameters, a signal is transmitted to the boiler receiver, which automatically turns on the required mode.

The owner can control the operation of the system, make changes to parameters, and prevent malfunctions using his own smartphone. The system allows you to save gas by remotely setting minimum temperature values ​​when no one is at home.

Installation of thermostats

This is an opportunity to carry out GSM control even for older boilers. A universal electronic unit is purchased separately and installed on the boiler or close to it. Thermostats are mounted separately on each radiator.

Up to six pieces are allowed in one heating system. Control is carried out remotely, even if the owner is hundreds of kilometers away, or directly on the control unit.

Design and principle of operation

The gas boiler is controlled via GSM using a small-sized GSM module. Of value are universal devices that can interact with several models of units, for example, the domestic Telemetrics module is capable of functioning with a dozen boiler units of Russian and Western production. The module organizes the transfer of data on the performance of the unit and thermal conditions in the house using SMS messages or through software applications.

The GSM agent performs remote control of the boiler operating modes, so the house will be heated with a preset internal air temperature when the residents arrive, and in their absence, the rooms will be heated in standby mode. The advantage of such control is that it is implemented by one responsible person, using constant access to the current operating parameters of the heat supply system.

The installation of a GSM thermostat is capable of taking over control of the thermal processes of the boiler, and user access to it is possible from any region of the planet equipped with mobile communications. Modern gas boilers are a complex of complex interconnected systems; incorrect regulation of even one parameter will cause an emergency when operating expensive equipment.

Modern units are produced non-volatile. Even if the owner receives a signal that the power or water is turned off in the house, he will be able to quickly respond online to prevent accidents.

Reviews of GSM boiler control modules: advantages and disadvantages

The innovative system causes various reviews about it. This is understandable, since nothing is perfect. And even such the latest equipment has both positive and negative sides. Most of the advantages have already been announced. It is worth pointing out the shortcomings. There aren't many of them.

Among the main users, the high cost of the devices is highlighted, although one can argue with this. The assortment includes a large number of inexpensive models that work no worse than their expensive counterparts.

Small but important modular systems for boiler control will help significantly reduce gas and electricity consumption. But, at the same time, they are able to create optimally comfortable living conditions even when a person is hundreds of kilometers from his own home.

Remote controller functionality

The number of functions in any GSM module is limited and is determined by the following factors: the number of channels and, accordingly, sensors that can be connected through them, remote control features, as well as the ability to regulate heating indicators.

Basic and additional options

A standard set of sensors scans temperature, pressure and registers gas leaks; setting additional ones automatically enables new functions. Such sensors can be digital or analog. More often, manufacturers use analog ones, but this depends on the interface of the module itself.

The listed main functions guarantee uninterrupted and stable control of the heating system and implement the operating principles of the device:

1. Switching the entire heating system on and off.
2. Possibility to turn on/off, reboot the boiler or additional equipment.
3. Remotely change the boiler operation settings, temperature intensity in the whole house or in a separate room, simply by sending an SMS with the required code. This will reduce gas consumption to 25-30%.
4. Daily information via mobile messages about the state of the boiler, namely: notifications about operating parameters, temperature conditions, and, if necessary, about emergency situations, automatic shutdown of the device due to breakdowns.
5. Using a pin code for the SIM card to avoid connection by third parties and any fraud.
6. Prompt notification of an emergency shutdown of the heating system due to a fire, leak or any breakdown, if the owner has previously connected additional response sensors for them. The intelligent system, in the event of an emergency, takes steps itself. For example, in the event of a gas leak, the boiler or all equipment is turned off.
7. Electrical voltage stability control - protection against sudden energy surges.
8. Autonomous mode of operation of the controller - it is ensured by the presence of a battery. If the power goes out, the module will run on this battery. But remember that when the power is turned off, only the message sending function will work, since the boiler requires continuous current to operate.
9. By reducing the heating load, the service life of the equipment increases.

Users set in advance the minimum and maximum permissible values ​​of parameters (for example, temperature conditions). When the indicators go beyond the specified range, the owner receives an SMS message about this.

Some modern modifications of GSM modules can display statistics on boiler operation in the form of creating time graphs.

For the convenience of users, the module can “report via SMS” not only to the owner, but also to other family members. You can connect from 2 to 10 numbers, depending on the equipment model

If you are going abroad and roaming is expensive, then you can use one of the other numbers. In some module models, control via voice messages is available.

The functionality, even with standard equipment, is high. As a result, the user will be able to fully control the heating and other systems in his absence.

Additional functions are not fundamental when choosing a module, but they significantly simplify the life of owners:

1. Possibility to connect an additional relay for new sensors.
2. Launching additional equipment and the ability to control it using a cell phone from a distance.
3. Pressure control function in a solid fuel boiler.
4. Monitoring the level of diesel fuel if the boiler is using liquid fuel.
5. Calculation of the quantity and quality of pellets in the compartment of a pellet heating unit.
6. Checking the boiler feeder.
7. Turn on the emergency siren.

If you install additional sensors, you will be able to perform the following functions:

• security of the premises in the presence of motion sensors (can be internal - for the house and external - for the site);
• the fire safety function is guaranteed by the smoke indicator - the user specifies the limit numbers in advance;
• flood warning - the leakage sensor will give a signal and shut off the water.

It is the various sensors and correct configuration of the module that guarantee that you will know exactly what is happening with all the controlled equipment.

Modes of equipment use

The selected control mode determines when and what information you will receive about the operation of the controlled equipment:

• Automatic , in which the system operates according to previously established parameters, analyzing information throughout the house or in individual heated rooms. You receive a report on the heating operation at a specified time.
• Manual (feedback from the user to the system) involves the user sending a message with a code word or making a call to change certain settings or modes. For example, you want to know the temperature in a certain room or increase it to warm up the entire house.
• Anxious . If there is a power failure, smoke, a leak, gas surges, incorrect operation of equipment (the boiler stops working due to some kind of breakdown), then you will promptly receive a message about the breakdown.

In the latter situation, the module can block the damaged element or turn off the entire system. In addition, during an accident, alarm SMS messages are sent to all previously specified numbers.

A sample report in a mobile phone program about the life of the boiler when the standard mode is activated (indicated by the user as “0”)

All three modes are available in standard modules, but it is important to configure their operation correctly when installing the system.

Using the Internet

When the heating device is located in the Internet coverage area, it is possible to connect a thermostat that operates via the network. The user sets the temperature standard in the room in advance, and if the indicator drops below this mark, the heating mode is automatically changed. In this case, the device transmits information about its operation through a working WiFi router.

The owner of the device can monitor its operation via a smartphone and, if necessary, make program changes. In this case, the provider that transmits the data helps with this. This option requires high-speed Internet both in the place where the boiler is located and in the house where the user is located.

Using the Internet allows you to quickly synchronize data and inform the owner of the device about all problematic situations using alerts.