Wall-mounted electric radiators for dachas are an economical and convenient way to heat any country buildings: houses, dachas, bathhouses. Due to the lack of gas pipelines and central heating systems, a heating boiler is a very expensive alternative to heat supply systems. These radiators are affordable, easy to install and convenient to use, and the cost of their operation is much lower than other heating systems for suburban buildings.
Electric heating
Energy saving
Energy savings in electric heaters occur by controlling the required room heating temperature using a thermostat. The device reaches the set temperature, the power turns off, and when the heater cools down, it turns on again. The choice of housing material and type of coolant are also aimed at energy saving.
Additional features that 80% of buyers are interested in
- Anti-frost function . If you activate this function, the heater will automatically start heating the room at temperatures below 5 degrees;
- There are additional functions: “economy”, “comfort”;
- One of the most useful additional functions of a convector can be considered air ionization;
- Rollover sensor. An important feature that helps protect small children and pets. In case of a fall, the device automatically turns off;
- Automatic memorization of the parameters that were set when turned on;
- Modern convectors make it possible to program operating parameters, so you have the opportunity to change the temperature hourly .
Advantages and disadvantages of electric wall heaters
In addition to the main advantage - there is no need to supply gas to the site, because the electric battery only needs an outlet, the autonomous electric heating system has additional pros and cons.
Advantages:
- wide range of models offered;
- environmental Safety;
- variety of design solutions;
- ease of installation;
- work in automatic mode;
- high efficiency;
- silent operation of most models.
Flaws:
- high cost of electricity;
- the need to install a multiphase distributor;
- The price of an electric radiator is higher than that of a conventional battery.
Types of wall batteries
There are several types of electric wall batteries, differing in operating principle.
Infrared
The operating principle of infrared batteries is to convert electrical energy into thermal radiation. Due to long-wave radiation, the floor and objects on it are heated, which serve as heat transmitters. Heating objects, rather than air, retains heat longer, allowing you to use energy sparingly.
Convector
In electric convectors, heat transfer is carried out by heating the air passing through the device. Warm air increases in volume and exits through the grilles of the device, and cold air enters in its place. Thus, the room warms up very quickly. It is important to prevent the presence of drafts so that the convector does not work uselessly.
Prices for electric wall convector
Electric wall convector
Oil radiator
The element located inside the radiator heats the intermediate coolant (mineral oil), which then warms up the body of the unit. The oil used retains heat for a long time, allowing you to save on electricity. Oil radiators are cheaper than other types of heaters and have small dimensions. However, heaters of this type warm up the room rather slowly, especially large ones. The surface of the radiator heats up to 150°; this requires careful handling of the device.
Fan heaters
The essence of the operation of fan heaters is to warm up the air flow that passes through the heating element. The air supply to the device is provided by a built-in fan. Most often, fan heaters are used in rooms where maintaining a constant temperature is not required. Many models can be used as a regular fan.
Prices for electric fan heaters
Electric fan heaters
Steam-drip heater
In a paradrip heater system, water is placed in a confined space, which is heated by electricity and turned into steam. Then condensation occurs and the water is returned back to the system with the liquid carrier. This principle of operation of the heater allows you to use two types of energy at once: from the coolant and from steam condensation. After turning off the power, the device retains heat for a long time.
Carbon heating devices
Carbon heaters use carbon fiber placed in a quartz tube as a heater. This is a long-wave emitter that warms up objects in the room, not the air.
Lithium bromide heaters
The lithium bromide radiator consists of vacuum sections filled with lithium and bromide liquid, which turns into steam at a temperature of 35°. The steam rises to the top of the sections, giving off high temperature, and warms up the radiator.
A brief overview of models that are in high demand
Timberk TEC.E0 M 1500
The built-in heating elements belong to the HEATING ENERGI BALANS - a revolutionary system with almost instantaneous heating to peak power. There is built-in overheating protection PROLIFE SAFETY SYSTEM , which significantly increases the service life and safety of the equipment.
The brand belongs to a Swedish company that appeared on the equipment market about 15 years ago , thanks to the innovative developments of Scandinavian specialists. Currently, the company is an international holding company with representative offices in European countries, the Asian region and Russia.
The model was developed by an Israeli branch and assembled in China. The convector has a built-in mechanical thermostat with step-by-step power control. There are 2 heating ranges: 650 and 850 W. A programming mode is provided.
The design includes a special COMFORT , which monitors the optimal indoor temperature.
The water resistance of the equipment is classified as IP24 , which means that the electrical appliance is reliably protected from splashes and can be installed in rooms with high humidity levels. The delivery set includes stands, so the heater is equally suitable for wall and floor mounting.
Overall dimensions: 580/330/540 for width, depth and height, respectively, product weight: 5 kg.
Nobo Viking NFC 2N - NFC 4N
A modernized generation of previous models of this class, which have gained popularity among users.
The brand belongs to a Norwegian company with a century-old history. The company began its activities with the production of hardware, gradually adapting to market needs, and became one of the leading European suppliers of heating equipment.
The equipment is used for heating premises with an area of 10-28 m2 , ideal for residential and commercial real estate.
The models are considered universal: suitable for floor installation and wall mounting, produced in a waterproof and dustproof housing that meets the international class IP24 : protection against splashes and wet environments. Thanks to this feature, the products can be installed in bathrooms.
The products are characterized by silent operation and automatically maintain the set temperature. The delivery set does not include a thermostat: the element must be purchased separately. NCU class thermostat is suitable for installation . Dimensions:
- Width – 1,025 mm.
- Height – 200 mm.
- Depth – 50 mm.
The weight of the products does not exceed 4 kg , and there is built-in overheating protection.
Ballu BEC/EZER-1500
The temperature regime is set by a DOUBLE G FORSE : a new generation patented technology. the THERMORESIST COMPACT convection circuit and the enlarged air intake of the IINTAKE .
The brand belongs to a Chinese company, the equipment is assembled in Russia. As a result, the products attract the attention of buyers with an affordable price and high build quality, while being adapted to work in difficult climatic conditions.
The rated power of the model is 1,500 W , the equipment is designed for heating rooms up to 20 m2 . Heating elements evenly warm the interior space, creating a comfortable and cozy atmosphere.
The product is ideal for installation in apartments, country houses, and office premises. The design of the model was developed by Italian specialists, so the product fits harmoniously into any interior interior.
The design includes built-in overheating protection and an ultra-precise thermostat with an electronic control system. The product is produced in a moisture-proof case, so it can be used in rooms with high levels of humidity. Overall dimensions: 595*400*100 , structural weight – 4 kg .
Polaris PCH 1001
The product is produced in a waterproof case, so it is ideal for rooms with high levels of humidity: bathrooms, washrooms, kitchens.
A leading Russian company, founded in 1992 by a group of enthusiastic students from the Moscow Aviation Institute. The trademark belongs to the international manufacturing corporation TEXTON CORPORATION LLC , registered in the state of Delaware.
Currently, POLARIS has representative offices in Israel, China, and Italy; the product range includes more than 700 items . However, climate systems and heating equipment remain a priority direction for the development of the enterprise.
Polaris PCH 1001 is a convector with a power of 1,000 W , designed for heating rooms up to 15 m2 . The model is equipped with a mechanical control system, suitable for wall mounting and floor installation. The case is metal, which completely eliminates accidental mechanical damage.
The built-in heating element is made of aluminum alloy and has an X-shape, which ensures uniform heating of the air flow. The design has a built-in thermostat, but there is no automatic shut-off sensor. The model operates in one mode.
Overall dimensions: 460*400*86 mm , weight – 4 kg .
Electrolux EFH/W-1020
A bright representative of the brand. Compact but powerful wall convector designed for heating rooms up to 27 m2 .
The birthplace of the brand is Sweden, the history of the manufacturing company goes back more than 100 years . The company initially specialized in the development of household appliances and electronics. From about the mid -70s-80s . last century, the manufacturer is launching a new product line designed to maintain a comfortable and healthy atmosphere in residential areas.
Currently, it is the largest international concern, known in 150 countries.
The temperature regime is maintained by a ceramic heating element: devices of this class are recognized as the most durable and safest on the market.
The model is equipped with an electronic control system; for ease of operation, a remote ; the switch is supplemented with an LED indicator. The design includes a built-in thermostat and an automatic shut-off timer. The product is intended for wall mounting.
The convector warms up the interior space in just 10 minutes , the room temperature is displayed on the LCD display.
For safe operation, built-in protection against overheating and short circuit is provided. The built-in air ionizer looks like an interesting solution.
Overall dimensions: 654*251*146 , weight – 4.2 kg .
Noirot Spot E-5 1500
Designed for use in residential and office premises. The design is based on the RX SILENCE PLUS , created using patented technology.
The products are manufactured by a French company with an interesting history. The founder of the company is Jacques Noirot, the inventor of the world's first electric heater. Thanks to the work of the company, post-war France was able to survive the shortage of solid fuel without losses.
Today, the range of products includes more than 40 items , the brand is known in 100 countries around the world.
The heater provides uniform heating of the interior space, does not burn oxygen, and maintains optimal humidity.
The product has a multi-level protection system; thanks to the AUTO RESTART , it tolerates power surges well and can operate in autonomous mode. The product is manufactured in a waterproof housing, so it can be installed in rooms with high humidity without additional grounding.
Electronic control is responsible for turning the equipment on/off, setting the desired temperature, and protecting the equipment from freezing in the winter.
Overall dimensions: 440*580*50 , weight – 5.5 kg .
Stiebel Eltron CNS 150 S
Wall convector with mechanical control system. The efficiency of the equipment is 98% , which is the best indicator on the equipment market. High efficiency is achieved due to a tubular heating element made of aluminum alloy.
The brand belongs to a German company that dates back to 1924 . Initial specialization: production of boilers and low-power home heaters. In 1991 , the first ventilation system with heat recovery was put into mass production.
Currently, the company's products are known all over the world; the manufacturer is constantly expanding its range, introducing new technologies and patented developments into home heating systems.
The design includes an electronic thermostat with step-by-step temperature control in the range of +5/+30 degrees .
For safe operation, a relay is provided that automatically turns off the device in case of overheating. The body of the model is protected from moisture and dust, so the model is ideal for bathrooms and rooms with high humidity levels.
Overall dimensions: 620*140*500 mm , weight: 6 kg .
Recommendations for choosing an electric wall heater
When choosing economical electric wall-mounted radiators for your dacha, you need to consider some recommendations.
High-quality and economical radiators are distinguished by the following characteristics:
- If you don’t have a lot of money to buy a heater, focus on models with a manual temperature control; such models are cheaper.
- When purchasing a radiator for your home, pay attention to the material of the heating element. For example, the service life of a tubular electric heater is 15 years. There are models with a long service life. Convectors with a needle heater are also considered budget-friendly; they have a limited service life, but are suitable for rooms that do not require constant heating, for example, a summer house.
- It is best to choose electric heaters with electronic thermostats. They are more expensive, but react more sensitively to temperature fluctuations, allowing you to maintain a given level of heat and save energy.
- If you decide to purchase a floor radiator, pay attention to the presence of a tip-over sensor. Especially if you have small children.
- It is best to install electric heaters under each window, since these places are more vulnerable to cold entering the room.
- The optimal power of the convector is calculated according to the principle: 1 kW for every 10 sq. m. with ceiling heights up to 270 cm. If the ceilings are higher, then add 10% for every 10 cm.
How to save on electricity without sacrificing quality
Electrical energy is an expensive resource. Electric heaters have significantly higher operating costs than their gas and water counterparts. Therefore, in order not to overpay, you can try to save money. How to do it? Purchase an energy-saving model of wall-mounted convector.
What makes such devices more economical to use:
- Smart control. Microprocessor thermostats independently set the temperature of the device depending on the time of day. In the evening and at night, when everyone is in the house, the radiator works more intensely than in the daytime, while everyone is busy relaxing in the fresh air or doing other things outside.
Microprocessor thermostats
- Energy saving technologies of the latest generation. If the technical characteristics of electric heaters are quite complex and develop more slowly, then there are no such difficulties with the heat exchange process itself. An electric liquid heating device consumes only 700-800 W. versus 1 kW. electricity with the classic version.
New generation electric heating devices
To correctly calculate energy consumption, it is necessary to multiply the power of the radiator by its operating time.
Installation of a wall convector
You can install the convector by turning to professionals, or on your own in accordance with the manufacturer’s recommendations.
If you install the electric battery yourself, you can use the following step-by-step instructions:
- Remove the device from the packaging and turn it over on its back.
- Unscrew the bracket if it is not packaged separately.
- Attach the mount to the wall and mark the location of the holes with a marker. Consider the manufacturer's recommendations for distances from the floor and walls. If the instructions do not include any, use the following parameters: height from the floor and distance to the nearest objects - 20 cm, gap between the wall - 20 mm, from the outlet - 30 cm.
- For a wooden wall, use self-tapping screws. For concrete, drill holes with a hammer drill and drive in dowels. Next, screw the mounting frame.
- Place the heater on the frame.
- Connect power.
- Set a comfortable temperature. Find out the calculator for calculating the heat load for heating a building using the link.