Lining the stove with artificial stone, instructions and photos

Some stoves require decorative finishing. If funds allow, you can decorate them with natural materials. Since this solution is not for everyone, many choose to line the stove with artificial stone. This option has many advantages.

The article discusses the types of suitable materials, issues of base preparation and installation. Using the instructions, you can finish the oven yourself. But even if do-it-yourself cladding is not included in the plans, the information will help you not make a mistake in choosing a stone and monitor the work of a specialist.

Figure 1. Stove lined with artificial stone in the interior

Advantages of artificial stone

Natural stone is expensive. In this, the “fake” has an undoubted advantage. But cost is not the only advantage of artificial stone. Among the advantages of the latter:

relative ease of installation; finishing with tiles or stone slabs requires high qualifications; strict dimensions of materials make the slightest miscalculation fatal - a clumsy result is guaranteed;
artificial stone can be different, and a clear geometry may be present in this case as well; but nothing prevents you from purchasing a stone with shapes close to natural - hence there is no need to maintain “mathematically” even seams;
inclusion of light fillers in the composition, which are responsible for significantly lightening the finishing structure; this is important because the stone is characterized by considerable thickness, and excess weight would reduce the adhesion (adhesion) of the coating to the base;
the opportunity to not limit the flight of imagination in any way - the market is replete with offers for every taste;
no need for expensive professional tools; natural stone and ceramic tiles may require professional equipment; artificial variations can also dictate similar requirements, but a stone with a ragged silhouette is a completely different matter.

How to prepare the masonry surface

The third component of a high-quality fireplace cladding is a carefully prepared base. It is strictly necessary to prime brickwork and the composition for this should be of the highest quality possible. It is recommended to use Knauf Tiefengrund or similar acrylate-based primers Dufa Putzgrung, Marshall Export Base, but only for interior work.

The second step is to secure the plaster mesh. The cell size must be chosen twice as large as the planned thickness of the adhesive seam. You cannot fasten the mesh with dowels in plastic plugs; you should use metal anchor wedges with a diameter of 6 mm. The fastening points are located with a frequency of about 25–30 cm. It is necessary to fasten into the body of the brick, and not into the seam. To prevent the masonry from splitting, turn the hammer drill to low speed.

Additionally, you can “tear” the surface of the masonry by tapping it with a hammer and chisel to form many notches. This will significantly increase adhesion, but this can only be done at the initial stage before priming. At the end of the preparation, the surface must be thoroughly dust-free; you can also open the masonry with another layer of primer from a hand sprayer.

Types of stone suitable for stove finishing

Figure 2. Artificial stone options
*

There are many types of artificial stone. Not all of them are suitable for cladding bases that are subject to temperature changes. Let's consider the suitable ones.

Porcelain tiles

Artificial stone is another common name for ceramic granite. Visually, the material does not have to resemble at all what it is associated with. Rather, it is an analogue of ceramics or glass. However, in terms of strength, porcelain stoneware is superior to both and natural prototypes. Being fired in a kiln at high temperatures, the material does not react in any way to the thermal effects of the fireplace. He doesn’t care about mechanical load either – within reasonable limits.

There are several types of ceramic granite. If you wish, you can find hundreds of collections that imitate stone not only at the level of physical and chemical characteristics, but also externally. There are materials with both strict geometry and a “natural” silhouette. You can use any slabs, but the latter type is preferable for those who decide to finish the stove themselves.

Porcelain stoneware contains various types of clay, feldspar, mineral additives and pigments. The multi-component mixture is pressed under enormous pressure and then fired at temperatures above 1200 degrees. This provides excellent strength characteristics.

concrete stone

One of the most popular types of artificial stone, which is most often used when decorating stoves. The composition includes sand, cement, dyes, plasticizers, fillers and water repellents. Materials of this type are distinguished by good contextual indicators and accessibility - lining the stove with concrete artificial stone will not strain the budget.

Gypsum-based stone

It has excellent strength characteristics. Any imitations are possible. Due to the properties of gypsum, it is well suited for lining heated surfaces.

Traditional methods

The first 3 points and positions in Fig. and in the list above - traditional methods of facing fireplaces and stoves. The best of them, but the most expensive and complex, is finishing with tiles; it increases the efficiency of the stove by 15-17 percentage points. For example, if the initial efficiency of the stove is 60%, then after tiling it will reach 70%; For this reason, we will return to tiling later.

Finishing the furnace with dry-molded facing bricks gives an increase in efficiency of 7-9 percentage points. provided that it is carried out at the same time as the construction of the furnace, i.e. decorative brick cladding was included in its layout at the design stage. Otherwise, when lining an already standing fire (running) stove, an increase in efficiency is possible, as when lining with terracotta, up to 5 percentage points. The facing brick is then mounted on the fireplace/stove structure in the same way as stone (see below), but the labor-intensive procedure of its preliminary laying is much simplified.

Brick cladding of heating devices

When using a modern insulated fireplace insert with glass and a standard chimney for it, a small fireplace can be made entirely of face brick, pos. 1 in Fig. on right. Just not silicate, in Fig. just light! And a stove or stove-fireplace with a lining of red facing brick under a simple worker fits well aesthetically with majolica, pos. 2. However, these and other types of “brick” decor can be achieved more easily and cheaper by facing with terracotta and clinker. But before moving on to them, let's linger a little on the plaster.

Stove/fireplace plaster

Plastering a fireplace or stove allows you to achieve good aesthetics of the device in various types of interiors, see figure, but it is very labor-intensive even for simple white plaster. Decorative plasters, e.g. Venetian or polished stucco, you will have to leave it here altogether, this is a separate complex topic. In any case, the main obstacle when plastering a stove/fireplace is cutting the seams. If the appliance and masonry mortar in the joints are sintered into stone, preparing its surface for plaster becomes not only long, but exhausting, requiring extreme attention and experience so that a crack does not appear in the joint.

Cladding stoves and fireplaces with plaster

Next, the plaster mass needs lime. Even in the conditions of a fireplace shopping center, gypsum soon begins to lose water of crystallization, causing the plaster to dry out. The addition of vermiculite does not help, it only worsens heat transfer. In general, the procedure for plastering a fireplace or stove is as follows:

The parts of the furnace structure to be lined are cleaned of the previous finish until there are no traces of it; the last residues are removed with a steel brush.
The surface under the plaster is moistened by applying lightly moistened burlap or technical cloth for 1-1.5 hours.
Masonry joints are cut to a depth of 9-10 mm with a narrow chisel for cutting out grooves - a cross-cutting tool - and light blows of a hammer.
If the device was previously in use (heated), it will not be possible to cut the seams to the required depth right away: picking at dry clay mortar is unacceptable! In this case, wetting and cutting are repeated several times.
The surface with cut seams is carefully brushed to remove dust and crumbs, then moistened with a plaster brush.
Prepare a primary (starting) plaster solution with the consistency of medium-thick sour cream.
The starting solution is used to fill the cut seams and the base surface to a thickness of 4-5 mm.
After the primary plaster has dried, the same finishing solution or decorative plaster with the consistency of very thick sour cream or soft plasticine is prepared.
The finishing plaster is applied in a layer of the same thickness.
After the plaster has completely dried, a full cycle of putting the furnace into operation (starting up) is carried out: drying, a series of accelerating fireboxes, a test firebox.

Material selection criteria

Figure 3. And a few more variations of the stone
*

When choosing stove stones, you need to pay attention to the following aspects:

price; very often the price of imported materials is higher than domestic ones - despite the fact that the quality is no better; This is far from an axiom, but it is recommended to take a closer look at the market;
compliance of the slabs with the necessary requirements; first of all, the stone must be heat-resistant - otherwise the coating will not last long; the material must be strong and wear-resistant, preferably chemically inert; the packaging contains markings declaring the most important characteristics;
date of manufacture; no, we are not talking about “delay”, but quite the opposite - too “fresh” concrete materials are not yet ready to become finishing materials, especially in the context of lining furnaces.

Remember! The lower your qualifications, the more desirable the blurry shape of the slabs. This will hide the flaws that will inevitably occur when installing it yourself.

Chamotte

This is a fireproof and durable tile made in the style of classic cladding. It looks very conservative and is perfect for a simple style interior. The advantage of using it will be not only fire resistance, but also incredible durability. This type of cladding will last almost forever. At the same time, the tile itself is very resistant to damage, exposure to both high and low temperatures, and does not emit any harmful substances when heated. The downside may be its cost.

Preparing the base

The choice is made, the stone is in place. But this is not enough for finishing - first you need to prepare the base. It should be smooth and durable. If the stove is not new, you will have to first remove the old coating. It is necessary that the base remains clean after dismantling. Grease stains, pieces of mortar, tile or paint residues must be removed. In the case of surfaces subject to heating, this aspect is very important - it is necessary to ensure maximum adhesion of the plaster mixture to the base and glue to the plaster.

The adhesion will be better if the brick seams are deepened. This can be done simply and quickly using a grinder and a diamond blade. A 5mm recess is sufficient. After the basic preparatory work, you need to check whether the base is loose. To do this, go over the surface and seams with a metal brush - nothing should crumble.

Left:

saturate the walls with a primer - this will strengthen the base and enhance the adhesion of the materials;
reinforce the base - this is also necessary to strengthen the ligament; as a reinforcing layer - plaster mesh;
moisten the prepared surface generously with water; ignoring this point will lead to the fact that the base will absorb most of the liquid from the plaster - this will have a very negative impact on the strength of the latter.

About tiles

The tiled stove is a truly luxurious structure, even if it is dilapidated, see fig. However, tiling is definitely not the kind of work that can be done by studying the technology from the descriptions; This is an even more delicate matter, requiring experience and accuracy than cladding with natural stone.

Tiled stoves and fireplaces

Tiles are generally prepared from the same kaolin mass as high-quality tiles. To harmonize with TKR and improve the heating technology of the furnace, the tiles are molded into box-shaped ones with a cavity - a tiller, pos. 1a next rice. – which is filled with sand during the cladding process. You need mountain sand with rough grains and a minimal admixture of clay; it does not swell, does not sinter or cake due to cyclic heating. The tiles are placed on a greasy clay mortar; The clay used is white, the sand is the same mountain sand. Add half a glass to a glass of table salt to a bucket of the prepared solution.

Cladding the stove with tiles

Before facing, the tiles are laid out and sorted out, as in the case of wild stone, achieving evenness in the rows. The dimensions of the tiles have been standardized by GOST since 1947, but the tolerance is quite wide, approx. 1.5 mm. It is impossible to achieve less due to the properties of the material itself. With a cladding height of 10 rows, the spacing of the seams can reach 15 mm, which, as you understand, is in no way acceptable.

Note: the base of large artistic panels on tiles is laid out and adjusted by hand at the factory. Therefore, tiled panels are very expensive, but they are put in place without layout.

The tiling is done in order, tying the tiles together with steel pins and wire. As a rule, the stove is lined with tiles in the order of its construction, and the lining must always be ahead of the masonry, as shown in pos. 3. In this case, the tiles are knitted with anchor loops, as in pos. 1b. Some craftsmen (qualitatively few) know how to tile walk-in stoves; in this case, knitting is done with anchor pins, pos. 2.

Leveling the oven base

Figure 4. Preparing the stove base for finishing
*

Theoretically, you can do without plastering. It is quite possible to line the stove with stone and mortar. But this is the last century - today there are many special heat-resistant mixtures on sale that increase the service life of the coating. And the consumption of such compounds is regulated by technical and financial considerations. Accordingly, the base should be as smooth as possible.

For those who want to work the old fashioned way, here is a recipe for mixing a heat-resistant plaster mixture:

sand;
cement;
clay;
water.

The ratio of sand, cement and clay is 0.2/1/3. Water is added according to the situation - the consistency depends on the layer of mortar and the size of the slabs.

However, it is more advisable to purchase a ready-made mixture. It is distinguished by a more precise composition and strict mixing. There are many options on sale.

Important! Carefully study the packaging - the composition of the mixture and instructions. Both dry plaster and tile adhesive must be heat-resistant

We recommend reading about how to properly plaster in articles devoted to this process. It is important to heat the stove before work, and then let the finished plaster sit for several days. This will increase the service life of the coating and avoid the appearance of cracks.

It will also be useful: barbecue oven - types and characteristics.

Let's start work

The beginning of fastening is a crucial moment.

As you start, so will you finish.

At the beginning of facing the fireplace with stone, finishing is carried out from the corner. Laying should be done alternately, alternating long and short elements.
First of all, attach the thickest tiles and use the minimum amount of mortar for this. This will help you in further work.
To make the structure look more natural and aesthetically pleasing, the installation elements should be adjusted to size. To adjust the size, use wide nippers or a hacksaw. Try to mount the treated sides so that they are either below or above the viewing angle.
Apply a layer of mortar about 1.5 cm onto the installation element. Use a trowel for this. Control the distribution of the solution on the surface; it should be completely and evenly covered.

After laying the mesh, apply a layer of mortar

When laying the element, it should be lightly pressed and slightly moved to different positions by pressing. This will help to completely fill the seam and secure the element most correctly.

Seams are being adjusted

Choosing tile adhesive

Figure 5. Options for “stove” adhesive
The stone is laid on tile adhesive. We will not repeat the importance of resistance to high temperatures. But this is not the only criterion for choosing a composition.

Artificial stone is usually not large in size. But if the oven is lined with dimensional materials, you need to take care of adhesion. In such cases, you need to purchase glue designed to work with heavy slabs. And in general, it’s better not to skimp and buy a mixture with excellent grip.

If the base is properly prepared, the glue calculation is carried out according to the diagram specified in the instructions. Otherwise, the quantity must be adjusted taking into account deviations of the furnace surface from the plane and vertical.

Interesting solutions for framing fireplaces

Naples 715u

Fireplaces of this model consist of different-sized parts in a combination of natural, artificial stones and fireclay bricks. The color range is provided for every taste and includes cream and pastel tones. Marble is processed using mirror polishing, which emphasizes the beauty and features of the stone. You can purchase this model at an affordable price.

Laura

A fairly compact fireplace model. Made of high quality steel and fireclay bricks. Withstands temperatures up to 700 degrees. It has a glass door made of heat-resistant glass and is equipped with soot protection. This fireplace has a budget price and retains heat perfectly.

North

A stunningly beautiful and elegant electric fireplace model. The device has a temperature controller, LEDs in the firewood, a control panel and an image of the fire in 2D mode. The fireplace is lined with wood in pastel colors. It also produces the peaceful crackling sound of burning wood.

Laudel Chauffage

The firebox of this model is made of thick cast iron. It has an attractive brass frame and an interesting design. Due to the material, the fireplace can warm up the room within 20 minutes. The firebox can withstand very high temperatures and is therefore suitable for use with both wood and coal.

Jabo Marmi

The Polish manufacturer presents fireplaces in a classic combination of natural stone and wood. The base is sandstone and polished marble of various colors. A wooden shelf above the fireplace will add coziness to the design. These fireplaces are available in corner and wall versions.

Elegy Rustic 700

The fireplace is made in the form of a corner structure. Made from fireclay bricks and dolomite. Due to high-quality material, it promises to serve for a long time and conscientiously.

Andalusia

High quality marble fireplaces are made in the form of wall and corner models. A variety of colors and designs will help you choose a fireplace to suit every taste. Models are provided from the simplest minimalist to chic fireplace portals with designer carvings.

Cassette fireplaces

Such fireplaces are classified as budget models. They are usually made of cast iron or steel with fire-resistant glass. Simple fireplace models are lined with a completely arbitrary material (wood, stone, drywall, etc.). Depending on the model, the glass door can open either horizontally or vertically.

When choosing a fireplace, you should be guided by the type of use and fire safety rules. Therefore, it is best to seek the services of trusted specialists.

9 photos

Tools needed for oven adhesive finishing

Figure 6. Tools for laying artificial stone

For stone cladding you will need:

level (laser, water or bubble);
grinder for cutting stone;
spatula for applying the mixture;
notched spatula (comb) for forming an adhesive layer;
rubber spatula;
rod or rule;
tile wedges;
foam sponge.

If the stove needs to be tiled with porcelain stoneware, a tile cutter will not hurt. It makes it much easier to cut tiles evenly and without chipping. A tile cutter cannot cut torn stone, and the effects of working with a grinder on it are almost invisible.

It is better to mix the glue with a mixer or a drill with a mixing attachment. But if you don’t have a drill, you can knead by hand. It is not recommended to do this - it takes a long time and is of lower quality, but not critical. It is only important to bring the mixture to the maximum possible homogeneity.

We do not mention small tools. Surely there is a tape measure and other little things in every home.

Installation subtleties

This stone can be laid on any surface, even wood and drywall. Only in this case additional surface preparation is required. For a wooden wall, it would be appropriate to install sheathing and waterproof it. With concrete and brick surfaces everything is simpler, but careful leveling of the surface cannot be avoided. It should be clean and smooth.

Walls are different everywhere, it is necessary to take into account all the nuances.

The walls are cleaned of dirt and dust.
Cracks, irregularities, and holes are repaired using putty.
If the walls have pronounced unevenness, you need to use drywall.
Carefully seal all joints and cover the surface with putty.
Then coat with primer, if necessary, do this twice, waiting for the first layer to dry.
Treat the wall additionally if there is fungus on it. It is not enough to simply remove it; you need to dry the wall well, then treat it with a primer.
If there is old coating on the walls, it must be completely removed. This applies to paint, wallpaper, decorative plaster.

The prepared surface is treated with a primer. Rooms with high humidity are treated with a special composition that prevents the appearance of fungus and mold. You can glue the gypsum stone using a cement-adhesive mortar, which is applied to the wall with a notched trowel. The glue dries very quickly, so there is no need to dilute a lot at once. You should try and get used to how much you can use in a certain amount of time.

This is a very important point, because the quality of the glue determines how the decorative elements will stick. It can be of several types.

A dry mixture based on cement. Provides good adhesion of the material to the surface, but shrinks.
Dry mixture with a gypsum base. Most suitable for gypsum tiles due to its composition.
You can use glue that is available for tiles, as well as liquid nails and mastic. Each composition contains instructions for the preparation and use of the material.

To lay out the panels efficiently, you must first make markings. To do this, you need to use a level and draw a line along which the first row will be laid out.

Laying begins from the bottom corner to the central part. The stone can be laid in even or uneven rows, leaving seams, which are then sealed with grout having a gypsum, alabaster, or cement base. When working, use a narrow spatula, act carefully, trying not to cover the tiles. If the surface gets dirty, you should immediately remove the solution with a wet sponge.

Marking the base

Where to start? And how to ensure even seams? Marking the walls helps with this. It is necessary to determine the starting points of installation. To do this, use a laser or water level. The latter option is preferable if you have a limited budget. It is in no way inferior to the technological version. Plus, in a small area, using a laser does not have any pronounced advantages.

The following recommendations will help you understand where to start and how to work:

in most cases you need to start from the corners (at least there should be whole elements in the corners);
with seamless cladding, it is better to lay the stone from the bottom up, and when laying with subsequent jointing (especially when laying porous slabs), it will be more convenient to go from top to bottom - this way the slabs will not become dirty;
whole slabs - the most visible places; usually these are the top and corners, but you need to look at the situation;
Usually the bottom row is left for last - it is more convenient to cover the floor with trimming, rather than adjusting the floor covering to the stove stone.

Based on this, the starting points are determined. After this, either lay the first row along the laser mark, or pull the beacon cord (according to the marks).

Recommendation! When laying from top to bottom, it is advisable to use an adhesive with low fluidity. In this regard, the compositions differ from each other - there are also those that do not allow the tiles to “float”, while maintaining plasticity for half an hour

How to lay it correctly?

Gypsum tiles are quite unpretentious.
Metal, wood, concrete surfaces, as well as old brickwork are suitable for installation. If you are going to decorate a less substantial object, finished with plasterboard, OSB board or plywood board, you need to make sure that these surfaces are able to maintain their shape. Attaching gypsum decor to drywall should begin after checking it for dryness.

Working with wood involves attaching fiberglass to it, which must be plastered. There are two methods of fastening gypsum tiles: dry (using fasteners) and wet.

Regardless of the chosen method, there is a set of preparatory activities that are fundamental:

Leveling the surface.
Cleaning from excess substances or contaminants using a soap solution, after which the surfaces will need to be thoroughly dried.
Now you can directly begin manipulating the facing bricks - they should be sorted, eliminate defective or broken specimens, and lay them out for ease of fastening.

Dry installation method:

Make sure that the elements being fixed have side grooves for fastenings.
Marking the wall. From any corner of the wall or furniture, a distance equal to the length of one tile is set aside. The guide is mounted vertically.
The resulting “tunnel” is filled with tiles from top to bottom.
The decor is secured using special bolts.
Repeatedly plotting the length of a given element next door.

Wet method:

Determine what method the bricks will be placed - in a joint or by opening the seams. Marking rows directly on the area to be treated and preliminary laying out tiles before fixing them to the wall

We must not forget about the thickness of the future seam, if it was decided to provide for it. Prepare a small portion of the adhesive solution, remembering that it begins to set within thirty minutes. Work must be done in the direction from bottom to top, starting from the bottom corner. The adhesive composition is applied directly to the tile or to the working area with a thickness of no more than 2 mm. The gypsum blank is pressed into the wall with a rotational motion very carefully.

Laying process

Figure 7. Laying stone on the stove
The cladding process is easier to demonstrate in the format of a list with recommended points:

It is better to apply glue both to the stone and to the base; in one case, the glue is immediately removed, leaving a minimal layer; in the other, the mixture is leveled with a notched trowel, forming a layer of a given thickness on all slabs;
the stone must be gently, but with force, pressed to the base;
corner areas must be completely filled with glue - voids are fraught with destruction of the coating;
when working with elements of different sizes, it is necessary to alternate slabs - this will give a natural-looking cladding;
special attention to the first row; the result depends on how well the start is set;
when laying from bottom to top, a rail is used to fix the first row; when working with slow-flowing glue, you don’t need to use a support, but you will have to let the mixture set a little in order to continue lining;
to form seams, use tile wedges, crosses or any other auxiliary elements;
when using stones of different thicknesses on the same plane, you need to start from the thickest slabs;
the more porous the stone, the more carefully you need to work - glue that gets into the pores is very difficult to remove;
cladding with flat slabs must be periodically controlled with a batten or rule; tiles with complex terrain (for example, cobblestones) do not need this.

Preparing a place for the fireplace mantel

A 4 cm thick wooden mantelpiece should be hidden in a groove. Draw a line at a height of 4 cm from the surface along which the stone will be laid.

Marking the mantelpiece

Trim the corner along the line

cutting

Figure 8. Options for cutting stone and tiles
Stone on a concrete base is cut with a grinder with a diamond wheel. When laying ceramic granite, use a specialized tool - a tile cutter.

When decorating the corners of stone cladding, do not use tiled corners. Instead, they make a bevel - they cut the sidewalls at an angle of 45 degrees. On an industrial scale, electric tile cutters are used for this purpose, but in our case, a grinder is sufficient. If the stone is soft, the process does not require much effort and high qualifications. Cut corners can be effectively joined to each other.

Characteristics

If we compare natural stone and gypsum, we can note a number of advantageous characteristics. Externally, it is almost impossible to distinguish a natural version from an artificial one; the latter looks very decent. But for interior decoration of an apartment, decorative material is also convenient because it is much lighter than its natural counterpart. This means that installation is much easier. The load on the wall is small, and accordingly, the material will hold better.

You can make the facing stone yourself. To reduce the cost of processing the material, you can initially produce a stone with a smooth surface.

Gypsum stone is more resistant to negative influences than its natural counterpart. The artificial material is easy to clean and is resistant to stains. A varied color palette allows you to choose the best option for finishing.

In order to create such a finishing material with your own hands, you need to use anhydride, gypsum, water and the necessary form. It is best to use a silicone base for these purposes; it is more pliable and plastic, and therefore the finished stone looks more natural. But along with silicone molds, metal, wooden, and plastic containers are used. However, this process is labor-intensive and time-consuming. Therefore, it is more familiar and convenient to use a ready-made stone.

Grouting and jointing

Figure 9. Grouting seams using a ball
For aesthetic and hygienic purposes, the seams are jointed - filled with a durable heat-resistant grout mixture. There are two main options for jointing - using a rubber spatula and using a syringe (or its replacement - a regular bag with a hole).

The trowel is suitable in situations with smooth stone and thin joints. Wide joints and porous tiles are the reason to turn to another option.

The process of jointing with a spatula:

the grout is applied with a spatula using diagonal (relative to the joints) movements;
the fugue should fill at least 2/3 of the seam thickness;
without allowing the grout to set, its excess is removed from the surface of the stone, and a fugue at the joints is formed using a finger or, for example, a piece of wire;
The coating is polished using a foam sponge.

The process of jointing using a bag:

You should fill a strong cellophane bag with the mixture and cut off one corner; it turned out to be an analogue of a syringe, with which the grout can be squeezed into the seam;
avoiding the fugue getting on the surface of the stone, fill the joints with it;
after filling a certain area, the joints are embroidered in the same way - using a round object of suitable diameter.

Preparatory work

Before proceeding with the installation of marble slabs, we sweep away debris and dust from the surface of the fireplace using a brush or broom.
Using a brush, apply primer to the entire surface of the fireplace.

Preparation of Litokol glue

Pour about a quarter of the bucket into a specially prepared container and mix with a drill. The mixture should not be very liquid, for better fixation with the surface. The glue is infused for 5-10 minutes and then mixed again. Mix thoroughly until the adhesive mixture becomes homogeneous (without lumps).

Preparation of ROBERLO “MARMOTIX” polyester mastic

Mix the glue with the hardener (it comes with the glue) and mix thoroughly. Hardener is used for fast setting. The whole process will take approximately half an hour.