TOP 15 best aluminum radiators: rating 2021-2022 and which ones to choose for heating an apartment or private house

Aluminum radiators are among the leaders among all heating devices. They are distinguished by high ergonomic and thermal performance indicators. The best manufacturers on the market are Royal Thermo, Rifar, Global, Sira Industrie, Oasis, VALFEX. Which devices are included in the rating of the best sectional radiators will be discussed further. Such radiators are perfect for a private home where there is low pressure in the heating system. For an apartment in a multi-storey building, it is better to play it safe and buy bimetallic radiators. They are 40% stronger and more reliable, but also 20% more expensive.

Go straight to the rating =>

Rating of the TOP 15 best aluminum radiators 2021-2022

Comparison table of characteristics

To compare the presented models, we suggest studying the table of characteristics in the article below.

How to choose and what to pay attention to?

Many companies are engaged in the production of heating devices from aluminum, but when choosing a device you should pay attention not to the brand, but to the technical characteristics of the product.

The following recommendations will help you choose a high-quality aluminum battery::

1. In terms of design, it is better to give preference to a cast radiator . It withstands pressure changes in the system much better and can work in any conditions.
2. You should also pay attention to the internal coating of the product . Reliable manufacturers treat the inside of the radiator with a special compound that forms an oxide film on the surface and protects the device from corrosion.
3. It is advisable to buy the radiator assembled and with the required number of sections - since factory twisting is usually more reliable than doing it yourself.
4. It is better to give preference to European manufacturers . Their devices are of high quality, and no toxic compounds are used for production. Chinese devices do not have such guarantees.

It is also advisable to purchase the device in a specialized heating equipment store, and not on the market..

This way the buyer will be protected from buying a fake.

Global VOX R 500

Country of origin: Italy.

Main characteristics:

• type: sectional, wall-mounted;
• maximum operating pressure – 16 atm;
• test pressure – 24 atm;
• temperature: 110 °C;
• heat output of one section: 195 W;
• Coolant pH: 6.5 – 8.5, recommended – 7 – 8;
• internal distance between axles: 500 mm;
• overall dimensions (H/W/D, mm): 590/80/95;
• connection type: side.

Model description

In the manufacture of radiators, the injection molding method is used. The model is used in closed or central heating systems. The quality of the outer coating is achieved using the anaphoresis method (immersion painting with epoxy primer and subsequent spraying of special decorative paint). Radiators are available in white.

The guaranteed service life of devices in this series is 10 years. With a weight of 1.53 kg and a volume of 0.46 l, one section is capable of heating 1.8 m² of area. This model uses both water and antifreeze as a coolant.

Advantages and disadvantages

This series was released for the Russian market and has a number of features that are in particular demand among consumers.

Unpretentiousness and reliability

The development of radiators of this model was carried out taking into account all Russian operational features (various quality of coolant, water hammer in the system, etc.). The letter “R” in the name means reinforcement; such heating devices can easily withstand pressure up to 16 atm inclusive. Radiators are installed in systems with pipes made of various types of material.

Heat dissipation and design

The excellent thermal conductivity of aluminum allows for rapid heating or cooling of the radiator. Easy installation allows you to quickly change the number of sections in the device if necessary. The design and elegant appearance of the model allow these radiators to be used both in offices and in residential premises with interiors in various styles.

Flaws

When using radiators in rooms with high humidity, you should avoid scratches and chips of the painted surface of heating devices. The formation of aluminum oxide at the site of damage can lead to paint peeling.

The best aluminum radiators for a private home in terms of price/quality ratio

Aluminum radiators can be installed both in high-rise buildings and in private houses. For individual heating systems, you can choose a high-quality and relatively inexpensive device.

Royal Thermo Revolution 500

Sectional aluminum radiator designed for wall mounting.

The connection to the heating system is lateral, there are no difficulties with installing the device.

The radiator is made of cast aluminum, so it can withstand water hammer and sudden pressure surges within 30 bar.

Depending on the model, the device can consist of 1-22 sections, but it is better to immediately buy an assembled radiator, focusing on the area of ​​the room.

The installation kit is not provided with the heater, so all additional elements required for installation will have to be purchased separately.

Specifications:

• heat output 181-3982 W;
• operating temperature 110 degrees;
• maximum operating pressure 20 bar;
• weight 1.2-26.4 kg;
• section dimensions (W/H/T) 80x570x80 mm.

pros

• increased strength of the plug;
• light weight;
• stylish design;
• very good heat dissipation;
• The wave-like shape of the fins ensures good circulation of heated air.

Minuses

• Poor quality painting of the rear part of the case;
• Installation kit not included.

ROMMER Profi AL 350

Externally simple but functional aluminum radiator, which is suitable for individual heating systems.

The device is compact and has a laconic design, so it will fit harmoniously into any interior.

The sectional design of the radiator allows you to select a model based on the area of ​​the room.

The product is entirely made of aluminum, and high-quality internal coating and external painting prevent rust and leakage..

The maximum operating pressure is 16 bar, but the device can withstand pressure surges up to 24 bar.

The connection is lateral, but the installation kit is not provided with the radiator, so the necessary parts for installing the radiator will have to be purchased separately.

Specifications:

• power 135-2700 W;
• operating temperature 110 degrees;
• number of sections 1-20;
• weight 0.8-16 kg;
• section dimensions (W/H/T) 80x428x80 mm.

pros

• affordable price;
• attractive appearance;
• the number of sections can be changed individually, depending on the area of ​​the room;
• reliable protection against rust and leaks;
• low weight makes transportation and installation easy.

Minuses

• provided without installation kit;
• Suitable only for individual heating systems.

Oasis AI 500/96

Lightweight and functional radiator is designed for installation in private houses or apartments with an individual heating system.

The body is made of aluminum, and high-quality painting and a special internal coating prevent the formation of rust.

The operating pressure of the battery is 16 bar, but, due to its thoughtful design and high-quality materials, the heater successfully withstands pressure surges up to 24 bar without loss of performance characteristics.

Users positively evaluate the high heat output of the device.

Additionally, the housing has a rotary regulator that allows you to adjust the room temperature with one movement.

Specifications:

• operating temperature 110 degrees;
• number of sections 4-12;
• power 532-1596 W;
• weight 3.4-10.2 kg;
• section dimensions 75x560x96 mm.

pros

• discreet design;
• high quality of materials and workmanship;
• affordable price;
• low weight facilitates installation and transportation;
• high-quality painting of the body.

Minuses

• provided without installation kit;
• dimensional model, in comparison with analogues.

Royal Thermo Revolution 500 x 8

A high-quality aluminum radiator with a standard number of sections is ideal for heating medium-sized residential premises.

The body is made using casting technology from high-quality aluminum. A special internal coating prevents the formation of rust, and a thick layer of paint on the outside of the device ensures long-term operation and protection against leaks.

The radiator can be installed in private houses with individual heating, and in high-rise buildings connected to a central heating system.

The design of the device is capable of withstanding an operating pressure of 20 bar and sudden pressure surges within 30 bar.

Specifications:

• power 1368 W;
• number of sections 8;
• operating temperature 110 degrees;
• weight 9.6 kg;
• section dimensions (W/H/T) 80x570x80 mm.

pros

• affordable price;
• wavy fins ensure uniform distribution of heated air throughout the room;
• high resistance to mechanical damage;
• the paint does not turn yellow or crack when exposed to high temperatures;
• There is a heating regulator on the body.

Minuses

• The kit does not include an installation kit;
• provided with a fixed number of sections.

Royal Thermo Indigo 500

The radiator of a famous European brand is distinguished by high quality workmanship and thoughtful design.

The device is of a sectional type, so the number of elements can be increased individually, focusing on the area of ​​the room.

The aluminum body is reliably protected from rust, thanks to a special internal coating and high-quality painting on the outside.

The device is recommended for installation in private houses with an individual heating system.

But the radiator is able to withstand operating pressure of 20 bar and surges of up to 30 bar, so it can also be installed in apartment buildings with a centralized heating system.

Specifications:

• heat output 195-2730 W;
• operating temperature 110 degrees;
• number of sections 1-14;
• weight 1.35-18.9 kg;
• section dimensions (W/H/T) 80x585x100 mm.

pros

• affordable price;
• reliable European manufacturer;
• high quality of materials and workmanship;
• there is a temperature regulator on the case;
• resistance to pressure surges and water hammer.

Minuses

• no mounting kit included;
• large dimensions in comparison with analogues.

Royal Thermo DreamLiner 500

Country of origin: Russia (unique developments jointly with Italian manufacturers).

Main characteristics:

• type: wall-mounted, sectional;
• maximum operating pressure – 20 atm;
• crimping pressure – 30 atm;
• operating temperature: 110 °C;
• heat output: 182 W;
• center-to-center height distance: 500 mm;
• dimensions (H/W/D, mm): 585/80/87;
• connection type: side.

Model description

These radiators can operate in both central and autonomous heating systems of residential and industrial buildings, cottages and country houses. The uniformity and durability of the coating is ensured by seven-fold application of German and Dutch nano-paints, available only in white.

One section contains 0.37 liters of coolant (water or antifreeze), weighs 1.31 kg and heats 1.8 m² of area.

These radiators can be used for at least 10 years without replacement.

Advantages and disadvantages

Radiators of this model are a striking example of a successful combination of power and energy saving.

Innovative fin design

The aerodynamic properties of the smoothly curved ends of the fins (in the form of a drop) allow you to maximize heat transfer and evenly warm the entire room. With its compact size, the radiator is able to maintain a comfortable temperature over fairly large areas.

Reliability

The alloy of aluminum, titanium and silicon used in the radiators of this model maximizes the corrosion protection of all internal surfaces and reliably protects the heating device from low-quality coolants and water hammer.

No shortcomings were found in this model.

The best aluminum radiators with side connections

The side connection of the radiator is standard for many apartments and houses, so many models have exactly this design. The choice of heating devices with side connections is wide, but there are models that stand out among the rest.

ROMMER AI Plus 200

This model of aluminum radiator is suitable for those who value quality, compactness and functionality..

The device is intended for wall mounting and lateral connection to the heating system.

But the design features suggest the use of a radiator only with individual, and not centralized heating systems.

The operating pressure of the device is 14 bar, but a short-term increase in this indicator to 21 bar is allowed.

The number of sections can be selected individually, depending on the area of ​​the room, but it is better to immediately buy a ready-made device with a certain number of sections, since the factory connection is more reliable than a manual one.

Specifications:

• operating temperature 110 degrees;
• power 120-2400 W;
• number of sections 1-20;
• weight 0.6-13.4 kg;
• section dimensions (W/H/T) 80x276x96 mm.

pros

• compact dimensions;
• affordable price;
• high heat transfer;
• low weight facilitates transportation and installation;
• The optimum ratio of price and quality.

Minuses

• not suitable for apartment buildings;
• not very high quality painting.

Royal Thermo Revolution 350

The radiator of a famous European brand has a discreet design and thoughtful design.

Combined with its affordable price and functionality, this makes the device one of the best for installation in private houses and apartments in multi-storey buildings.

The device body is made of high-quality aluminum, and a special internal coating protects the device from corrosion.

The outside of the radiator is painted with heat-resistant paint, which does not turn yellow or crack when exposed to high temperatures.

On the side of the case there is a convenient rotary regulator that allows you to adjust the room temperature.

Specifications:

• heat output 141-1974 W;
• working pressure 20 bar;
• operating temperature 110 degrees;
• weight 1-14.1 kg;
• dimensions (W/H/T) 80x420x80 mm.

pros

• high quality of materials and workmanship;
• universal use: suitable for both apartments and private houses;
• durable aluminum housing with high heat dissipation;
• there is protection against water hammer;
• high-quality external coating.

Minuses

• no mounting kit included;
• not suitable for low window sills.

Royal Thermo DreamLiner 500

Stylish aluminum radiator has an original design and excellent performance characteristics.

The device is designed for side connection, so there are no problems with installing the radiator. But keep in mind that the installation kit is not included, so brackets and other necessary accessories will have to be purchased separately.

The design of the heating device allows it to be connected to individual and centralized heating systems.

The operating pressure is 20 bar, but the high quality of the assembly ensures reliable protection of the device from water hammer and pressure surges within 30 bar.

Specifications:

• heat output 113-1592 W;
• operating temperature 110 degrees;
• number of sections 1-14;
• weight 1.3-18.3 kg;
• section dimensions (W/H/T) 80x580x87 mm.

pros

• universal design;
• high-quality assembly;
• water hammer protection;
• light weight;
• Compact dimensions allow you to install the radiator under a low window sill.

Minuses

• no mounting kit included;
• Some users encounter a manufacturing defect.

Rifar Alum 500

An easy-to-use and reliable domestically produced aluminum radiator is specially adapted for installation in multi-storey buildings.

The durable aluminum case is painted on the outside with heat-resistant paint, and inside is treated with a special anti-corrosion compound.

Combined with a robust design, this allows the device to withstand operating pressures of 20 bar, as well as water hammer and short-term pressure increases of up to 30 bar.

The lightweight body and compact dimensions make the device easy to transport and install.

But you need to keep in mind that the installation kit is not included, so you will have to buy brackets and other accessories additionally.

Specifications:

• heat output 183-2928 W;
• operating temperature 135 degrees;
• number of sections 1-16;
• weight 1.4-23.2 kg;
• section dimensions (W/H/T) 80x565x90 mm.

pros

• reliable domestic manufacturer;
• there is protection against water hammer;
• convenient temperature regulator on the case;
• high-quality protection against rust and leaks;
• high heat transfer.

Minuses

• high cost in comparison with analogues;
• no mounting kit included.

Global VOX R 500

Sectional aluminum radiator designed for wall mounting and side connection.

The design of the heating device is ascetic and discreet, so the device will fit harmoniously into any interior.

The body is made of high-quality aluminum, and the inside is coated with a special composition that prevents corrosion.

The heating device is more suitable for private houses or apartments with individual heating, since the operating pressure of 16 bar is not enough to connect to the central heating system.

Moreover, the device is able to withstand water hammer and short-term pressure surges of up to 24 bar.

The outside of the case is painted with heat-resistant paint, and is equipped with a convenient rotary regulator that allows you to adjust the room temperature.

Specifications:

• heat output 127-2540 W;
• operating temperature 110 degrees;
• number of sections 1-20;
• weight 1.4-29 kg;
• section dimensions (W/H/T) 80x590x95 mm.

pros

• the number of sections can be adjusted individually, depending on the area of ​​the room;
• stylish design;
• high-quality materials and assembly;
• water hammer protection;
• does not leak or rust even after long-term use.

Minuses

• high price;
• not always on sale.

Royal Thermo Indigo 500

Country of origin: Russia, manufactured using Italian technology.

Main characteristics:

• type: wall-mounted, sectional;
• maximum operating pressure – 20 atm;
• crimping pressure – 30 atm;
• operating temperature: 110 °C;
• heat output: 205 W;
• center-to-center height distance: 500 mm;
• dimensions (H/W/D, mm): 585/80/100;
• connection type: side.

Model description

Radiators of this series can be connected to closed and centralized heating systems of residential, industrial buildings and individual buildings. The durability of the coating is ensured by applying imported nano-paints in 2 stages using special European technology; they are produced in white.

The coolant can be either water or antifreeze; manufacturers provide a ten-year warranty on the operation of these heating devices. One radiator section with a volume of 0.29 liters weighs 1.65 kg and heats up to 2 m² of area.

Advantages and disadvantages

The radiators of this model are distinguished by their elegant design, perfect lines and powerful heat dissipation.

Unique design

An improved additional wing at the top of the radiator creates reverse convection, which cuts off cold air coming from the window. At the same time, the heated air is distributed evenly throughout the heated area.

Thermal output increased by adding the number of vertical fins to the collector. This makes the device a little heavier, but significantly increases heat transfer.

Inertia and material

Thanks to the rapid heating and cooling of the radiator, you can quickly adjust the heat supply to the room necessary for comfortable living. An alloy of aluminum with titanium and silicon reliably protects the radiator from corrosion, and original imported protective and sealing materials protect against leaks.

No flaws were found in this model.

The best aluminum radiators with bottom connection

Not all houses have bottom connections for radiators, but the choice of heating devices with this function is quite wide. Most users prefer domestic devices.

Rifar Alum Ventil 500

Compact, inexpensive, but reliable aluminum radiator, adapted for use with domestic heating systems.

Since the body is entirely made of aluminum, the weight of the radiator is light, which makes transportation and installation easier.

The outer part of the case has a special protective coating against rust . The top of the device is completely covered with heat-resistant paint, which does not crack or turn yellow even after several years of use.

The radiator is a sectional device, so the number of sections can be selected individually, based on the area of ​​the room.

The operating pressure of the device is 20 bar, so it can be connected to both individual and central heating systems.

Specifications:

• heat output 183-2928 W;
• operating temperature 135 degrees;
• number of sections 1-16;
• weight 1.4-23.2 kg;
• section dimensions (W/H/T) 80x565x90 mm.

pros

• resistance to water hammer;
• withstands pressure surges up to 30 bar;
• stylish design;
• compact dimensions;
• suitable for private houses and apartments.

Minuses

• no mounting kit included;
• Some users complain about the poor quality of the paint on the back of the case.

Rifar Alum Ventil 350

The domestic radiator is characterized by ease of operation, reliability and thoughtful design.

The durable and lightweight aluminum body is coated with a special anti-corrosion compound, so failure of the device or leakage is excluded.

There is a regulator on the side of the case, with which the user can independently adjust the room temperature.

The design of the device is universal, and the convenient bottom connection allows you to mount the radiator even under a low window sill.

High heat transfer and optimal distribution of hot air ensure long-term temperature retention and rapid heating of the room.

Specifications:

• heat output 153-2448 W;
• operating temperature 135 degrees;
• number of sections 1-16;
• weight 1.2-19.2 kg;
• section dimensions (W/H/T) 80x415x90 mm.

pros

• affordable price;
• compact dimensions;
• withstands pressure surges up to 30 bar;
• low weight facilitates transportation and installation;
• the number of sections can be selected individually.

Minuses

• fasteners for installation must be purchased separately;
• Some users do not like the quality of the temperature controller.

Rifar Alum Ventil 500 x 5

A functional and well-thought-out model of an aluminum radiator with 5 sections . High

heat transfer and operating temperature ensure quick heating of the room, but the limited number of sections allows the device to be installed only in small and medium-sized rooms.

The durable housing made of high-quality aluminum successfully withstands water hammer and pressure surges up to 30 bar.

The inside of the housing is coated with a special chemical composition that prevents corrosion and guarantees protection against leaks.

Users also positively evaluate the design of the device, which makes the radiator suitable for installation in residential, office and other premises.

Specifications:

• heat output 915 W;
• operating temperature 135 degrees;
• working pressure 20 bar;
• weight 7.2 kg;
• dimensions (W/H/T) 80x400x90 mm.

pros

• reliable protection against corrosion;
• convenient temperature regulator on the case;
• high heat transfer;
• affordable price;
• protection against water hammer and pressure surges.

Minuses

• Poor quality painting of the rear part of the case;
• Suitable for bottom connection only.

Rifar Alum Ventil 350 x 13

A powerful and functional radiator that can be used to heat even large rooms.

The product is made of lightweight but durable aluminum. The inside of the case is coated with a protective compound that prevents the formation of rust and leakage of the device.

Additionally, a rotary regulator is provided on the case, which allows the user to independently adjust the room temperature.

The outer layer of paint is very durable, so it does not crack or turn yellow when exposed to high temperatures.

The operating pressure of the device is 20 bar, but the housing itself is capable of withstanding water hammer and pressure surges of up to 30 bar.

Specifications:

• heat output 1989 W;
• operating temperature 135 degrees;
• working pressure 20 bar;
• weight 15.6 kg;
• dimensions (W/H/T) 80x1040x90 mm.

pros

• reliable domestic manufacturer;
• affordable price;
• water hammer protection;
• does not leak or rust;
• stylish design.

Minuses

• no mounting kit included;
• the number of sections is standard and cannot be adjusted.

Rifar Alum Ventil 350 x 11

Functional and easy-to-use aluminum radiator with a standard number of sections.

11 heating elements are enough to heat and maintain optimal temperature even in large rooms.

Another advantage of the device is that the mounting kit is included, so the user does not have to additionally purchase brackets and other fasteners.

The lightweight but durable aluminum body has a protective coating against rust and is resistant to water hammer, so if the pressure level in the system rises to 30 bar, the device will not fail.

Specifications:

• heat output 1683 W;
• operating temperature 135 degrees;
• working pressure 20 bar;
• weight 13.2 kg;
• dimensions (W/H/T) 80x880x90 mm.

pros

• reliable domestic manufacturer;
• protection against corrosion and leaks;
• adapted for use with domestic heating systems;
• affordable price;
• stylish design.

Minuses

• standard number of sections;
• Suitable for bottom connection only.

Global ISEO 500

Country of origin: Italy.

Main characteristics:

• type: wall-mounted, sectional;
• operating pressure – 16 atm;
• pressure test – 24 atm;
• temperature: 110 °C;
• heat output: 181 W;
• distance between axles: 500 mm;
• overall dimensions (H/W/D, mm): 582/80/80;
• connection types: top or bottom.

Model description

Radiators of this series are used in central or autonomous heating systems. The uniformity and strength of the paint coating is achieved by painting using the full immersion method, followed by spraying with a special paint containing polyester.

The devices are available in white color and their service life reaches 30 years. The coolant volume in 1 section, which can be used as water or antifreeze, is 0.46 liters. The heating area of ​​one section weighing 1.43 kg is 1.8 m². In the manufacture of radiators, high-tech injection molding is used.

Advantages and disadvantages

Radiators of this series were specially designed for Russian consumers, taking into account all the operating features.

Versatility and quality

With relatively small sizes, they have high heat transfer (several times higher than steel or cast iron products). Intersectional seals are made of silicone, which significantly increases the service life of the connections themselves. Heating devices of this model can be installed in systems with copper, steel, plastic and metal-plastic pipes.

Easy installation and great appearance

Radiators are simple and easy to install. By changing the number of sections, you can easily select the desired length or power and ensure the optimal temperature in the room.

With a depth of 80 mm, the radiator can be hung on the wall, installed in a niche or under a window sill, or hidden behind curtains or furniture. The elegant design of the device allows it to fit into any interior as a full-fledged part of the composition.

Minuses

The only drawback of these radiators is the possibility of corrosion if low-quality coolant is used.

Types of aluminum radiators and their brief description

There are three types of aluminum radiators in total.

They differ in manufacturing technology and have some features:

1. Cast . Such batteries are manufactured using injection molding technology. As a rule, an alloy of aluminum and silicon is used for production. Thanks to this, the products are characterized by increased strength, corrosion resistance and excellent heat transfer.
2. Extrusion . Sections of such radiators are extruded using an extruder under pressure and then connected by welding. Some manufacturers, in order to save money, use composite glue for this purpose. In any case, the likelihood of such a radiator leaking is much higher than that of a cast one.
3. Anodized . This is the most expensive type of radiator. For production, special highly purified aluminum with anodic oxidation is used. Due to this, the structure of the metal itself changes and its resistance to corrosion increases. However, due to the high cost, this type of aluminum radiators is practically not used in everyday life.

Halsen AL500

Country of origin: Russia (manufactured using German technologies).

Main characteristics:

• type: sectional, mostly wall-mounted;
• maximum operating pressure – 16 atm;
• crimping pressure – 24 atm;
• operating temperature: 120 °C;
• heat output: 208 W;
• height distance between pipe axes: 500 mm;
• dimensions (H/W/D, mm): 582/80/96;
• connection type: side.

Model description

Radiators are manufactured using a modern injection molding method, which allows each section to be cast separately, and are connected to any heating systems in public and residential buildings. When painting, phosphochrome plating is used, followed by spraying of epoxy polyester enamel.

Heating devices are produced in white color and use water as the coolant. They have a long service life (up to 20 years), 1 section with a volume of 0.43 l and a weight of 1.1 kg heats at least 2 m² of area.

Advantages and disadvantages

Radiators of this series are manufactured using modern European equipment and have a quality that is not inferior to Western models.

Anti-corrosion resistance and reliability

Thanks to the improved interior finishing, this model is completely free from rust formation inside the channels. Heating devices undergo repeated quality checks, which ensures complete protection of radiators from leaks.

No deficiencies found.

Advantages and disadvantages of aluminum radiators

The increased demand for aluminum radiators is explained by their numerous advantages.

The advantages of such heating devices include:

• Ability to withstand high pressure and water hammer . On average, an aluminum radiator is designed for a pressure of 20 bar, but most models can withstand short-term pressure surges of up to 30 bar. Due to this, such batteries are suitable for installation in apartment buildings.
• The high level of heat transfer from aluminum contributes to rapid and uniform heating of the room . In addition, a special regulator is installed on the radiators themselves, which allows you to adjust the temperature.
• The low weight of aluminum batteries makes them easier to transport and install . Also, such products have a stylish design and fit harmoniously into any interior.
• Aluminum radiators are presented in a huge range of standard sizes . This allows you to choose a model that is suitable in size and number of sections.

But we must not forget about the disadvantages.

First of all, the maximum operating temperature of aluminum batteries is 110 degrees, so this indicator must be taken into account before connecting to the system.

In addition, aluminum corrodes easily . And, if the manufacturer has saved on the internal treatment of the radiator, it is unlikely that leaks will be avoided.

Lammin ECO AL-500

Country of origin: Finland.

Main characteristics:

• type: wall-mounted, sectional;
• maximum operating pressure – 16 atm;
• crimping pressure – 24 atm;
• operating temperature: 110 °C;
• heat output: 190 W;
• Coolant pH: 7 – 8;
• center-to-center height distance: 500 mm;
• overall dimensions (H/W/D, mm): 577/80/80;
• connection type: side.

Model description

Radiators of this series operate in autonomous or central heating systems of residential and public buildings, as well as in cottages and dachas. The quality and durability of the coating is ensured by two-stage painting, first using the method of immersion in a paint bath, then powder coating in an electrostatic field, the color of the paint is white.

The volume of coolant (water) in 1 section weighing 1.03 kg is only 0.35 liters. Guaranteed service life is 10 years, heating area per section is 1.9 m².

Advantages and disadvantages

Radiators of this series are designed and manufactured taking into account Russian operating conditions and have been tested for compliance with GOST requirements. It is noteworthy that with a relatively light weight, this model has a powerful heat flow, which allows you to evenly heat large areas.

Quality of internal surface treatment

A reliable zirconium coating protects the inside of the radiator from oxidation and corrosion, increasing the service life and operation of the device. The absence of roughness on the walls of the collector eliminates the accumulation of small debris present in low-quality coolant, and therefore prevents blockages.

No shortcomings have been identified in this radiator model.

Which company should you choose?

Many companies are engaged in the production of aluminum radiators, but the leaders are traditionally considered:

1. Italy . Well-known companies Sira, Ferroli and Global produce stylish products with high-quality heat-resistant coating that reliably protects devices from corrosion. Radiators of these brands can withstand pressure changes well, but are expensive.
2. Russia . Rifar is considered the leader among domestic radiator manufacturers. Some brand models copy Global products in design and technical characteristics. Such radiators cost less than Italian ones, but they are much better adapted for connection to domestic heating systems.
3. China . The most famous Chinese manufacturers of aluminum radiators are Bilux and Konner. Such products are inexpensive and of high quality, but in order not to buy a defective or counterfeit product, you need to buy a radiator only in a specialized store, having first studied its technical data sheet.

Steel, copper or aluminum – what to choose?

It is difficult to unequivocally answer the question of which radiator is better, since each device made of a certain metal has its own characteristics, pros and cons.

An objective assessment of radiators made of a certain type of metal will help you make the right choice:

• Steel devices are more suitable for individual rather than centralized heating systems . Such radiators are cheaper than aluminum ones, have good heat transfer and are resistant to corrosion. But steel is considered a relatively brittle metal and is not able to withstand water hammer when the pressure increases to a level greater than 25 bar.
• Copper radiators have excellent performance characteristics . Copper has high thermal conductivity, so such a battery will warm the room 2 times faster than aluminum. In addition, the device is resistant to corrosion and water hammer, but the cost of copper radiators is very high, so many users bypass them.
• Aluminum devices have all the necessary characteristics for long-term operation . But in order for the battery to warm the room well and not leak, you need to buy products from trusted manufacturers.

Rommer AL500

Country of origin: China.

Main characteristics:

• type: wall-mounted, sectional;
• maximum operating pressure – 16 atm;
• crimping pressure – 24 atm;
• operating temperature: 110 °C;
• heat output: 175 W;
• center-to-center height distance: 500 mm;
• overall dimensions (H/W/D, mm): 572/80/80;
• connection type: top-bottom.

Model description

Radiators of this series are used in autonomous or central heating systems, in civil and industrial buildings, as well as in cottages, mansions or country houses.

The quality and durability of the coating is ensured by painting in 2 stages: first, an epoxy anti-corrosion layer is applied using cataphoresis, then a layer of decorative powder paint, the available color is white.

The manufacturer provides a 5-year warranty. The area heated by 1 section is 1.7 m², volume – 0.28 l, weight – 1 kg. Water is used as a coolant.

Aluminum or bimetallic – which one to choose?

There are also bimetallic radiators on the market. They cost more than aluminum ones, but are considered the most modern type of heating device.

In bimetallic radiators, the body is made of aluminum and the interior is made of stainless steel.

Due to this, the device is characterized by increased resistance to corrosion and provides quick heating of the room.

In general, the performance characteristics of bimetallic and aluminum radiators are similar, and the only difference between them is the price.

If your budget allows, it is better to buy a bimetallic radiator, and if finances are limited, you can install an aluminum one, but it must be of very high quality.

Tips for choosing radiators

• It is better to buy batteries from well-known brands.
• The more expensive the cost, the better the quality.
• You need to study the passport of radiators before purchasing. All important characteristics are listed only there. Sometimes sellers are not well informed about the products.
• The heavier the radiators, the better. The back wall of the radiators should be thick. If the thickness is insufficient, then during pressure surges the heating device can easily break. The photo of aluminum heating radiators shows how thick the back wall and side ribs should be.
• It would be great if there was an oxide film on the radiators.