8 Best Wall Heaters

Wall heaters represent a wide range of various heating equipment that can be mounted on the wall without creating a fire hazard. There are more than six types of such devices, differing in operating principle and source of energy consumption. From the given rating of the best wall heaters, you will find out proven and effective models for arranging heating in a private house, apartment, work and office premises, children's room, and bathroom.

Best Oil Wall Heaters

This type of equipment is a powerful source of heating. It is suitable for creating individual heating in an apartment if there are a sufficient number of panels for the available square meters. Oil circulates inside the housing, heated by a heating element, which promotes long-term heat retention.

LVI Kaba 05 140 10 230 10 1 - for apartments

This is the best wall-mounted oil heater for an apartment, where the calculation is based on one device per 10 m2. An area of 50 m2 will require 5 units. The snow-white surface of the heater looks beautiful in a home environment.

On the side of the case there is a start button and a thermostat, with which you can set a comfortable temperature for the season. There is a wide temperature range from 0 to 30 degrees.

Pros:

the Swedish manufacturer provides a guarantee of up to 10 years;
modern powder coating of sections;
the small panel width of 50 mm looks aesthetically pleasing in the apartment;
compact dimensions of the case 145x52 cm fit freely under the window;
a power of 1000 W will heat well without main heating;
a completely metal sealed chamber with oil lasts a long time and without leakage;
the thermostat automatically turns off the power when the set temperature is reached, which saves electricity;
the light indicator informs about the status of the device;
when tipping over, the protection is triggered;
low noise level;
frost protection mode during long periods of inactivity (during a trip on vacation in winter).

Minuses:

cost from 17,000 rubles;
the regulator is located at the bottom of the case, so you have to bend over to reach it;
there is no protection of the electrical unit from moisture.

Recommendations: 10 Best Infrared Heaters

10 Best Ceramic Heaters

10 best outdoor heaters

LVI Yali 05 080 21 230 13 1 double row - for a private house

This is the best wall-mounted oil heater for creating heating in a private home in a non-gas-free area. The housing contains two rows of panels with oil and heating elements, which provides an increased thermal effect.

The device is suitable for heating thick walls and constant use due to the power of 1250 W. One panel is designed for an area of 12 m2, so for a house of 80 m2 you will need about 6 units.

Fire hazard and operating rules

You can find reviews on the Internet with information that such products are a fire hazard and at one “wonderful” moment they can burst into blue flame.

To prevent this from happening to you, do not buy cheap Chinese products without certificates and follow the basic rules for using film heating pads:

the canvas can be rolled into a tube, but it must not be bent at right angles

cannot be included in the network in an unexpanded state

It is forbidden to cover the top with any kind of cloth, especially to lie down on it, putting it in bed instead of a sheet under the mattress

Many manufacturers place this warning on the front of the product.

You also can’t use them to dry things by hanging compartments or fruit in the closet.

There are other specially designed devices for this.

long-term use in damp areas without appropriate IP protection

It turns out that such heating paintings should under no circumstances be considered as an independent type of room heating. Otherwise you will be very disappointed in them.

But to maintain a comfortable temperature on cool autumn evenings, when full heating has not yet been provided, or it simply does not exist (for example, at the dacha), they can come in handy.

But here, too, proceed from the heating area - one film infrared picture with a power of 500 W per 10 m2.

If the room is larger, add the number of heaters accordingly. This is assuming you have a well-insulated and energy-efficient home overall.

The best wall quartz heaters

This type of heater is used for small rooms that need to be heated when the main system is insufficient.

Their main element is monolithic quartz sand slabs, inside of which a heating element is placed. This protects the surface from overheating, prolongs the heat after switching off and meets fire safety requirements for any room.

TepleEko 0.4 kW - for the corridor

This is the best wall-mounted quartz heater for placement in the hallway of a private home, where there are usually no heating radiators. The white plate is equipped with a decorative relief pattern, which further decorates the interior of the room.

The metal frame is powder coated. A 25 mm layer of quartz sand promotes long-term cooling of the panel. Current consumption is only 0.4 kW per hour, so the device can be kept on all day.

Pros:

cost from 2400 rubles;
rapid heating to operating temperature in 20 minutes;
compact dimensions 600x350 mm;
the thick panel takes a long time to cool down;
the surface heats up no higher than 95 degrees, which is completely safe for nearby objects;
work with voltage surges from 200 to 240 V;
low power consumption;
The kit includes a cable, plug and bracket for hanging;
Manufacturer's warranty up to 5 years.

Minuses:

the weight of one panel is 12 kg and requires strong walls for fastening;
If you carelessly hit a quartz panel with a heavy, sharp object, it can break.

Color change and workmanship

Another disadvantage is changing the background of the picture. If you initially chose a painting in white tones, then do not be surprised that over time it may turn yellow.

And black stripes of carbon thread will clearly protrude on the front side.

Therefore, it is advisable to choose film heating patterns in dark colors, without bright contrasting patterns. Otherwise, even if the heater works properly, after some time you will be ashamed to hang such a yellowed miracle in front of your guests.

By the way, paper and wallpaper that are directly exposed to infrared rays for a long time turn yellow in the same way as they do from the sun.

These devices quickly reach the set temperature (from 10 seconds to a minute), but they cool down almost instantly after they are unplugged. There is no talk here of any inertia like that of oil batteries, or even more so, like that of heated floors.

And when purchasing, carefully check the integrity of all current-carrying paths. We are, of course, not talking about outright handicraft, which is revealed by the naked eye.

But even high-quality goods during transportation or storage in a warehouse can get caught or scratched by something. The heating may and will work, but it is clearly not the 50 thousand hours declared by the manufacturer.

Best Gas Wall Heaters

Such devices can operate from gas in the main line or from liquefied fuel in a cylinder. They are used as the main heating due to their increased power.

Inside there is a burner and a panel that provides heat distribution and air convection. During installation, the devices need to vent combustion products outside.

Alpine Air NGS-50F - for a studio apartment

This is the best gas wall heater for a spacious studio apartment that does not have internal partitions to retain heat. One device can heat up to 49 m2, so by placing it on an external wall you can arrange individual heating in the apartment.

The heater design has rounded edges with perforations for air intake and outlet. All combustion products are removed outside, so there is no dry air in the room.

Pros:

warranty from the Turkish manufacturer for 3 years;
beautiful view that matches any room interior;
large heated area;
powder coating on a metal body;
There is a cast iron heat exchanger inside, so the heat lasts longer even after turning off;
small dimensions 600x600 mm;
built-in thermostat that controls temperature and saves gas;
quiet operation;
frost protection;
quick heating of the room (efficiency 86%);
The built-in fan speeds up the circulation of heated air.

Minuses:

gas pipeline or cylinders are required;
cost from 26,000 rubles;
needs to be connected to electricity;
can only be mounted on a wall adjacent to the street;
more complex installation due to drilling a large hole for the chimney in the supporting support.

Summarize

Modern heating panels are an excellent alternative to traditional radiators , surpassing them in many ways. They can be located in any facility: residential, warehouse, public, educational, medical or preschool.

Traditionally, the operation of heating systems is based on increasing the air temperature in the room, through which surrounding objects are heated. The operating principle of infrared panels is different: the energy they distribute resembles natural radiation from the sun, flame or fireplace.

The best film wall heaters

This type of equipment has a flat heating element enclosed in a carbon base, which contributes to the production of infrared rays that heat the surrounding surfaces.

The clear advantage of such models is their thinness and beautiful appearance, allowing them to be hung in rooms as decoration. Use devices for additional heating.

WARMTH OF THE CRIMEA EO 448/2 STONE FIREPLACE - in the bedroom

This is the best wall-mounted film heater to place in the bedroom to add a few degrees during the cold season. The canvas with the image of a solid fuel fireplace has a loop for fastening.

To hang a heating device, simply screw a self-tapping screw into a plaster wall or drill one hole with a hammer drill and drive a dowel. The working surface does not heat up above 65 degrees, so there will be no burn if you accidentally touch the canvas.

Pros:

low electricity consumption thanks to a power of 400 W;
cost from 1200 rubles;
completely silent operation allows operation at night;
beautiful design serves as an additional decoration for the room;
a large area of 1000x600 mm ensures good heat transfer;
power supply from a 220 V household network, which does not create overloads on the wiring;
quick heating in 3 minutes;
safe to touch.

Minuses:

warranty is only 1 year;
The carbon base briefly prolongs the operation of the device after switching off.

VELVET SEASON NEBN-0.7 KITTEN - for a children's room

This is the best film wall heater for additional heating in a children's room because it has an increased area with dimensions of 1300x580 mm, which allows you to quickly heat the room.

The film thickness of 1 mm weighs very little, which allows you to hang the device even on a thin nail. Children will love the eye-catching design with a kitten, and the transparent base will match different wall colors.

Pros:

cost from 1000 rubles;
suitable for rooms up to 15 m2;
500 W power increases the overall temperature by 5-10 degrees;
the carbon base has a long service life and is not prone to burnout;
the surface temperature does not exceed 60 degrees, so children who accidentally touch the canvas will not get burned;
the conversion of energy into infrared radiation promotes soft local heating without drying out the air;
fireproof solution for rooms with a large number of soft toys.

Minuses:

cools down quickly after switching off;
1 year warranty.

Disadvantages and cons

And now, after a colorful description of all the advantages, it’s worth talking about the disadvantages. One of the main ones is still insufficient power. As you know, to heat a room of 10 m2, on average, 1 kW of power is required.

These heaters are good in very small rooms. Don’t expect any miracles from one single picture hung in your bedroom or living room.

For example, such a film heater will never be able to raise the temperature from 18 degrees to 25. Yes, you can direct radiation from it to the bed and warm it up to a comfortable temperature. But this can be done much more efficiently and quickly using a heated blanket or sheet.

To specifically increase the temperature in the apartment, your walls should be literally hung with such warming paintings. And in this case, just forget about free sockets.

As you yourself understand, talking in this case about energy efficiency and some kind of savings would be simply ridiculous.

If you want to warm up a small room, close all the windows and entrance doors to it. Only after a day will you really be able to feel the temperature rise by several degrees.

The best wall-mounted electric convector heaters

This equipment starts air circulation with the intake of cold mass from below and the release of heated mass at the top. Inside there is a heating element in the form of a heating element or tape.

Additionally, there may be a fan to speed up the process. They are used for additional or main heating, which depends on the power.

NeoClima Comforte 1.0 – for the bathroom

This type of wall-mounted convection heater will be the best for heating the bathroom to feel comfortable in it. The device has protection against moisture, which is optimal for rooms with steam and splashes.

The body of the heater is powder coated, so it will not rust when used in such an environment. It is designed for an area of up to 10 m2, so the equipment is suitable for large rooms with a bath, shower and toilet.

Pros:

cost from 1800 rubles;
sealed housing with upper cutouts for the release of heated air;
white powder coating;
5 years warranty from the Greek manufacturer;
there is protection against freezing during long periods of inactivity;
durable metal case;
thermostat to set the desired temperature;
power 1000 W;
small dimensions 490x450 mm;
protection against overheating and moisture ingress;
Includes cable and two brackets for wall mounting;
the tape heater better withstands accidental impacts on the body;
springs on the mount increase the strength of fixation.

Minuses:

there is no indicator light, so it is difficult to immediately understand whether the device is turned on;
There is no built-in protection against accidental tipping.

Heating in the bathroom

Many people hang this picture in the bathroom. Especially if there is some kind of defect on the tile. She can cover him great.

However, even here, to increase the temperature by only 1 degree, it will take at least one hour of operation of the device. It is more reliable and safer to make a stationary electric coil or heated towel rail.

At the same time, do not forget about humidity and place the panel only in the permitted area, as well as the socket for connecting it.

The shell protection class of most devices does not exceed IP20.

Therefore, you cannot constantly keep them in a damp bathroom. You will have to bring the device in while it warms up, and then immediately remove it from the stud.

By the way, many people miss the point of reliable fastening and hang this electrical product at random. They even manage to hook it with a pin, so as not to damage the walls.

Meanwhile, this is one of the main factors of safe operation. Some users have had cases when the film heater came off the stud and its heating strips fell directly onto the power cord.

You can read the consequences in the review.

The best wall-mounted infrared heaters

To warm the room well, they use technology to convert electrical energy into infrared radiation.

To do this, heating elements are placed in glass tubes and equipped with a mirror screen that reflects radiation. The equipment can be used as auxiliary or main heating.

AEG IR Comfort 2022 - for the garage

This is the best infrared heater to mount on your garage wall to maintain your car in a comfortable environment.

The power of the device is 2000 W, which can serve as the main heating on an area of 12 m2. The design in a durable metal case protects the internal elements.

Pros:

two heating elements in glass flasks provide several power modes;
a durable grill protects the glass from damage;
dimensions 140x40 cm, convenient to hang on a long garage wall;
heating to operating condition in 1 second;
3 m power cable included;
indicator light;
completely silent operation;
Mounting to a load-bearing wall is supplied.

Minuses:

cost from 21,500 rubles;
2 year warranty;
no thermostat.

Types of thermostats

Thermostats are devices that are used in heating systems to maintain a given temperature regime.

There are two types of thermostats: mechanical and electronic.

Here, according to users, are the main advantages of an electric thermostat:

Accurate temperature control. The actual temperature differs from the set temperature by a maximum of 0.1°C. Deviations for a mechanical thermostat range from 1 to 3°C. Because of this, the latter consumes more heat energy.

Longer compliance with temperature accuracy and longer service life than the mechanical type.

Quiet operation, unlike a mechanical thermostat, the switching on and off of which is accompanied by a click.

The main advantages of a mechanical thermostat:

resistance to sudden voltage changes and low price.

Digital electronic temperature controllers are becoming widespread. Judging by the reviews, this is the “smartest” variety. There are devices with open and closed logic.

Devices with closed logic are characterized by an unchanged operating algorithm. It is impossible to adjust their work program. You can only change the main parameters. This type is most often used in heating systems for homes and offices.

Open logic thermostats have advanced settings. The owner can change the algorithm of their operation. Changes are made using buttons or the touch screen. Such devices are more often used in industrial enterprises, since their reprogramming must be carried out by specialists.

Advantages of panels

Let us summarize the advantages that characterize all panel heaters, regardless of the type of heating element:

Saving space in the room, since unused planes of walls and ceilings are used for installation;
Stylish appearance;
Manufacturability, energy saving;
Easy to install;
Possibility of further decoration and hiding under protective panels without compromising efficiency, if required by the interior of the room.

If we talk about which devices are better, then it will not be possible to give a clear answer to this question. It is necessary to consider each situation individually. For example, for a city apartment it is worth choosing an infrared option, which is optimal for constant use and demonstrates efficiency. For periodic use at the dacha or in a country house, a convector is better suited.

Principle of operation

The operating principle of solar panels is to generate electrical energy; they do not accumulate or generate it in any way. When the sun's rays directly hit their surface, they are immediately converted into current and removed from the panel.

Each plate can produce 250 W, so to improve the principle of operation they try to install them closer to each other. The current obtained as a result of photosynthesis flows through the distributor into the batteries, and then into the inverter of the power grid at home.

It should be noted that the volume of solar batteries affects the duration of daily operation of the batteries. The batteries are recharged throughout the day while the energy generated the previous day is used.

The operating principle is simple and at the same time effective thanks to the “semiconductor”. A semiconductor contains atoms that, thanks to an external electron, can capture or reflect other electrons. As a result, the surface of the solar cells is covered with this material. This “semiconductor” is Selenium and Silicon.