How does an elevator unit work in a district heating scheme?

Each granary must ensure the following operations with grain: reception, processing (cleaning and drying), storage, internal movements, release. All elevators, regardless of their types and purposes, operate according to the following principle:

Each granary must ensure the following operations with grain: reception, processing (cleaning and drying), storage, internal movements, release. All elevators, regardless of their types and purposes, operate according to the following principle:

1 - receiving belt conveyor; 2 - receiving hoppers: 3 - release device; 4 - elevator; 5 — overhead bunker; 6 — scales (bucket or portion); 7 - distribution pipes; 8 - over-silo conveyor; 9 — above-separator bunker; 10 - separator; 11 — silos for grain storage; 12 — silo conveyor; 13 - sub-separator bunker.

Grain and its processed products are one of the foundations of human nutrition, therefore this storage option is the most relevant among all possible grain storage facilities. The grain elevator is considered the most reliable, and therefore entire networks of such grain receivers are installed near producing areas. This makes it possible to level out grain losses during remote transportation from harvest sites.

Grain and its processed products are one of the foundations of human nutrition, therefore this storage option is the most relevant among all possible grain storage facilities. The grain elevator is considered the most reliable, and therefore entire networks of such grain receivers are installed near producing areas. This makes it possible to level out grain losses during remote transportation from harvest sites.

An elevator is understood as a special structure designed for storing large quantities of grain, taking into account bringing the grain to a condition. In addition to the storage facilities themselves, such a warehouse is equipped with a complex of special devices that weigh, receive, clean, dry and ship grain.

Alternatively, such a complex can be implemented in a mechanized silo-type device, which significantly saves space and ensures complete mechanization of the process. The first elevators appeared in Russia at the end of the 19th century; currently they are highly mechanized, efficient storage systems for grain crops.

Grain and products made from it are the basis of people's lives. The issue of their safety until transportation is very important. Grain elevators simplify it.

Grain and products made from it are the basis of people's lives. The issue of their safety until transportation is very important. Grain elevators simplify it.

The grain elevator is designed to store grain in large quantities and bring it to condition. The elevator inside includes mechanisms for loading and unloading grain and dryers. Work buildings, etc. Usually, organizations build entire turnkey elevator complexes.

In the grain harvesting and processing industry, a structure such as an elevator is often used. In other words, this structure is high-tech equipment for storing grain in special conditions and through such storage the grain is brought to a certain, required stage of condition.

Types and scope of application of grain elevators

A grain elevator is usually classified into one of the categories based on its purpose and storage volume. Types of elevators depending on the amount of grain:

• procurement - designed for 15 - 100 thousand tons of grain material, focused on work on receiving from farms and cleaning, short- and medium-term storage with subsequent shipment to larger facilities;
• long-term storage - an elevator for storing grain in large volumes (from 150 thousand tons) with maintaining condition and periodic shipment for processing;
• production - elevators for 10 - 15 thousand tons of grain, designed for prompt release into production and maintaining a supply of working material;
• transshipment or port - complexes for receiving and transshipping grain with different storage periods and the possibility of shipment to wagons, ships, and road transport.

Different types of elevators are designed and equipped depending on the specifics of storage and supporting operations. This is determined at the stage of preparing the design assignment and depends on local conditions and requirements for a particular facility.

Video description

In this video you will see how to disassemble and install a nozzle in an elevator:
Now you need to determine the size (diameter) of the nozzle (dc) using the formula below:

dс = 10d / √[0.78 / Gpr2 * (1 + u)2 * d4 + 0.6(1 + u)2 – 0.4u2],

where u is the dimensionless injection or mixing coefficient.

Next, to calculate u, you need to calculate u` using the formula:

u` = (t1 – tcm) / (tcm – tob),

where t1 is the temperature of the coolant at the entrance to the elevator (in °C).

To calculate u, you need to substitute the value of the coefficient u` into the formula:

u = u` * 1.15.

After the calculation, all that remains is to select the desired nozzle. They are available in several sizes and are marked with numbers from 0 to 7. You need to choose the one that is closer in size to the calculated value (see table No. 1).

Table No. 1. Nozzle diameter.

Functions and principle of operation of elevators

An elevator is an industrial grain storage facility, the design and arrangement of which takes into account all technological processes that ensure the reception, preparation, storage and release of grain. The principle of the elevator is the sequential execution of technological processes.

1. Reception of grain. Can be organized with any type of transport. In procurement elevators for farms, a vehicle unloading point into pits and bunkers is mainly designed. At transshipment elevators, berths and railway tracks can be organized.
2. Processing and preparation. The elevator design allows for grain heap cleaning, drying in grain dryers, and sorting by size (calibration). Depending on the sources of grain supply, ZAV and KZS complexes, mine grain dryers, and aspiration units can be used.
3. Storage. The main function is that the elevator grain storage is designed on the basis of metal silos with internal and external support systems.
4. Loading of grain. An elevator is a logistics hub equipped with a set of means for dispensing material on any scale using conveyors, pneumatic hoses, and bunkers. The composition of the equipment is determined by the volume of grain storage and transport capabilities for release.

Elevators are needed to solve complex problems of grain storage; their functions may differ depending on the characteristics of logistics, grain material, location on the ground and connection to other objects.

How does an elevator work?

An elevator is a structure built according to the silo type. Its design is a multifunctional building, which includes:

♦ compartment for receiving grain; ♦ dryer for grain crops; ♦ granary; ♦ building for work – equipment for various types of crop processing is concentrated here; ♦ shipping department; ♦ equipment for lifting wheat, corn and other grain raw materials and transporting them from one department to another; ♦ silo buildings, etc.

Today, elevators involved in the storage and processing of grain are often attached to large-capacity silo-type structures. The extension is carried out so that the elevator has communication lines with the main building for carrying out work. This is important because It is here that, basically, the necessary set of equipment and logistics are completely formed, through which grain crops are exported for further distribution.

Elevator structure according to functional systems

The elevator structure is a complex of silos, transport and preparation systems, control equipment and internal logistics. A grain elevator is an industrial facility in which the composition of the equipment and the design of all systems are standardized and are aimed at fulfilling the main task - to ensure the safety of grain within the conditions established as the storage standard. Most elevators include a functionally necessary set of equipment.

Reception systems and equipment

Pits, bunkers, hydraulic lifts for cars, pneumatic hoses for unloading cars and ships are used to unload grain into temporary containers. The composition is determined depending on logistics; in small farms it is enough to equip the elevator with devices for unloading cars.

Equipment for cleaning and preparing grain

The elevator's technological chain may include KZS and ZAV complexes as modular ready-made solutions. It is possible to install cleaning, aspiration, and other equipment in separate lines. The grain elevator can receive material after primary cleaning or work with ready-made grain.

Internal technological transport of the elevator

This is a set of equipment and machines for moving grain mass. It usually includes:

• pneumatic transport system;
• horizontal and inclined scraper conveyors;
• bucket elevators for lifting grain;
• conveyors and bag loading devices for feeding grain into silos;
• screw conveyors for feeding grain to equipment and unloading silos;
• gravity flow system with plugs, dampers and other devices for controlling grain flows.

Suction equipment

Depending on the specific elevator unit, aspiration systems with cyclones and cyclone batteries are used, which can separate dust and small inclusions from the air.

Video description

The following video will tell you how the elevator unit works:
If we talk about single-pipe house systems with an elevator, when starting them, it is necessary to perform a number of mandatory actions. First of all, you need to bleed the air from the return riser, and only at the second stage will you need to release the accumulated air from the supply riser, while opening the main valve.

The “advantages” of using an elevator unit include:

• independence of the device from other devices and electricity (this applies only to non-automatic elevators);
• simplicity of the elevator scheme (design);
• ease of system maintenance;
• independence from the external environment (the mixing coefficient of coolants of different temperatures does not depend on the external temperature);
• durability (thanks to its simple design, the elevator can serve for a long time without repairs or replacement of parts);
• functionality (the elevator unit has two more useful functions - it also acts as a pump and mixer);
• low cost (the metal parts that make up the elevator are inexpensive and not rare).

The main equipment of the elevator is silos

A modern grain elevator is a complex of metal containers - silos, into which grain prepared for storage is loaded. The height and diameter of the silo are selected according to the standard elevator design, based on capacity, space availability, wind and seismic activity.

Types of silos for grain storage:

• flat-bottomed - large-capacity storage facilities designed for long-term storage of material with active cross-ventilation of the mass;
• with a conical (conical) bottom - elevator silos in which operational stock is stored, grain for shipment or that has not undergone a full cycle of preparation for long-term storage.

The fundamental difference between the two types of elevator silos is not only in volume. More capacious flat-bottomed grain storage facilities in the elevator have ventilation ducts in the bottom and are installed on a more durable solid foundation. To unload them, capacious pits with high-capacity conveyors are required. The last layer of grain from the bottom is unloaded by a radial screw conveyor.

Silos with a conical bottom are installed on durable metal structures and are practically suspended to create conditions for unloading grain through the outlet hatch by gravity. When calculating these silos, the deformation load that occurs when a mass of material exits from below must be taken into account.

Completed projects

Construction of elevators, grain complexes. Production of elevator equipment.

The most hardworking. Naberezhnye Chelny port elevator

The elevator in Naberezhnye Chelny began to be built in 1913 and put into operation in 1917. The enterprise's simultaneous storage capacity was 2 million poods (about 32 thousand tons). In September, the elevator turns exactly 100 years old. Despite such a venerable age, the terminal regularly ships grains for transportation along the Kama River.

Visually, the elevator somewhat resembles a Lutheran church. Especially in old photographs.

Read also: Tricks for quickly making dumplings

In the 2000s, the company became part of the holding company CJSC AGROSILA GROUP. The current Naberezhnye Chelny Elevator includes 23 grain storage warehouses with a capacity of 85 thousand tons. In 2002, the elevator was included in the state protective register of local significance as a monument of industrial architecture.

Grain elevator logistics

A grain elevator constantly handles large flows of material, which requires active movement of grain between processes. The idea of ​​organizing storage in a battery of silos makes it possible to optimize internal logistics and thus obtain a number of effects important for the industrial organization of production:

• reduce the time required to complete transport operations;
• shorten grain movement paths;
• reduce the number of transshipments - changes in the type of transportation when moving;
• use all the capabilities of gravity systems as they are the least energy-consuming.

An elevator silo for grain storage is a kind of logistics basis for a complex system of transports that are concentrated around it and form short radial connections for supplying and selecting material. Flat storage does not provide an opportunity to provide efficient and low-cost internal transportation of grain material.

Node calculation

Elevator units of the heating system are the central elements of heating systems that heat residential or non-residential premises without unnecessary heat consumption. Since these systems may differ in the number of objects served, it is necessary to calculate the elevator so that the installed device works correctly. The essence of such calculation of the parameters of the future elevator is that it is necessary to find out two numbers: the size of the chamber for mixing liquids (d) and the nozzle (dс).

The size (diameter) of the internal chamber mixing water of different temperatures is calculated by the formula:

d = 0.874 * √Gpr,

where Gpr is the amount of mixed water (given), indicated in tons per hour.

To calculate the amount of water, you need to substitute the values ​​into the following formula:

Gpr = Gс / √h = Q / [(tcm – tob) * √h * 1000],

where Gс is the estimated water consumption (t/h);

h – reverse effect from the heating system (resistance; measured in meters of water column);

Q – amount of heat consumed (in kilocalories per hour);

tcm, tob - denotes t of the water mixture that goes for heating, and, accordingly, the cooled water that goes back, that is, through the return (expressed in degrees Celsius).

System for maintaining grain condition in elevator silos

A modern grain elevator is equipped with silos with complex internal systems. The ventilation system is of particular importance - thanks to the constant supply of air, the grain does not become moist during storage. Elevator silos for grain storage use horizontal and vertical ventilation, directing air flows through the entire mass in layers. This takes into account the effect of decreasing and increasing temperature due to pressure drop.

An equally important set of devices and units is the silo aspiration system. It must constantly capture and remove dust from the air, which creates the danger of grain contamination and the likelihood of cotton under the roof of the silo. Special equipment is provided for this, including several hatches to maintain normal pressure in the upper part of the silo. In grain storage elevators, the silo aspiration system is built on the basis of general industrial units, filters and air ducts.

Elevators are designed and built using standard design products and certified equipment. Manufacturers of equipment and silos operate in Russia, providing a full range of services from elevator design to its installation and turnkey launch. What types of elevators there are for storing grain and seed material can be seen in the photo in the section of our website.

Some features of the heating elevator

When considering the question of what an elevator unit is, it is worthwhile to dwell separately on the features of its arrangement for heating a house.

Heating elements Source tvoidom-msk.ru

When designing a heating system, special attention should be paid to the ratio of the resistance of the device to the pressure created inside the pipe that supplies water. It is optimal if this ratio is 1 to 7. The pressure difference between the supply and return circuits is also important. It is necessary to strive to ensure that these indicators coincide, then the system is considered fully operational. Deviation is allowed, but not more than 0.5 kgf/cm3.

Adjustable devices

The practice of using heating elevators shows that the use of adjustable devices is more necessary for foreign realities: Russian cold winters usually require good, stable heating of residential premises and there is no need to constantly change the temperature of the coolant.

Also, adjustable elevators are used for heating non-residential premises: if you lower the temperature at night, when there are no clients or visitors, you can achieve savings of up to 30%. Regulation of the coolant using such a heating elevator is carried out using a special additional relay equipped with an electric drive.

Auto elevator Source rusinfo.info

Comb

When a heated object, that is, a house with several floors, needs to install a special distributor that supplies heat to each individual object or to each room. To do this, use special additional equipment - a comb (also known as a collector).

The essence of the operation of this equipment is as follows: the coolant, ready for heating, flows out of the elevator outlet and enters the collector. After this, the comb distributes water to consumers with the same pressure. In this case, the operation of the entire system does not stop, and the mutual influence of its branches is excluded. In addition, the pressure in the batteries corresponds to the pressure at the elevator outlet.

Additional elements of the heating system

Increased interest in the question of what an elevator is in a heating system has recently arisen for a reason. The point is the constantly rising prices for housing and communal services. In such conditions, owners of private houses are thinking about obtaining savings and normal air temperatures in the winter.

Heating elevator Source maklakova25.1c-umi.ru

This can be done by using additional elements that reduce unnecessary energy consumption:

• circulation pumps;
• protective elements for pipes;
• water purification systems;
• various automatic devices aimed at controlling the comfortable heating mode of the coolant.

Equipment manufacturing

Complex designs are developed for existing types of equipment. Calculations are carried out taking into account the technical characteristics and the required volume of production of the final product.

The production of elevators and elevator equipment in Ukraine allows us to minimize the import of analogues from abroad and use products from the domestic market. It is worth adding that Ukraine itself successfully exports products for the construction of agricultural complexes to the West and Europe.

Most manufacturing companies have updated their technological facilities with the latest technology, thereby increasing the quality of their product range. Elevators may differ slightly from each other, but they all include the following structures and mechanisms:

• housings:
• reinforced concrete containers (silos);
• working building;
• equipment for receiving and distributing grain;
• Dryer.

Almost all production units have a power reserve. Statistics show that most factories use ¾ of their potential. This is due to the fact that the buyer usually plays it safe and places an order with a plan to increase production volumes. But in most cases this does not happen.

Modern elevators are factories controlled by automation. The volume of human labor is reduced as much as possible. The processes are controlled electronically through computer programs. Thus, digital technologies have found application in the agricultural sector.