Infrared heater picture - is it really possible to warm up from it? Rules for selection and operation so as not to burn out.

For several years now, new generation heaters have been widely represented on our market, which at the same time are a stylish decorative item.
We are talking about wall-mounted film heaters in the form of picturesque paintings. They work on the principle of infrared radiation. Are they really as effective as manufacturers say, what are the features of their operation, and are they worth the money? Let's take a closer look.

First, let's look at all their advantages, which they certainly have, and then we'll go over the significant disadvantages. There is little talk about them in commercials and stores.

Advantages over conventional heaters

One of the main advantages due to which many housewives look at these warming wall paintings and panels is their appearance and the ability to further decorate the interior of the apartment.

A single apartment owner can also choose the model he likes.

In addition to using them at home, they can also be used at work by hanging the picture directly near the workplace. In many offices, the use of fan heaters or heat blowers is officially prohibited due to their fire hazard.

But with such a heater there are no problems.

Forgot to install a heated floor or a separate radiator on your balcony or loggia?

And here this wonderful infrared device will help you out. Moreover, such warming paintings can be hung on walls made of any material.

The heating temperature of the surface of the film wall heater does not exceed 65-75 degrees. Therefore, it is simply impossible to get burned by accidental contact here.

Because of this, many people use them in children's rooms. For example, the most common oil radiators, which seem to be reliably protected on all sides and do not have open heating elements, are highly not recommended for use in children's rooms.

The best models of wall-mounted infrared heaters with a thermostat for heating a private home

Many rooms require additional heating. There are a huge number of devices that can provide this need. Among them are wall-mounted infrared heaters. They are less known to buyers due to the fact that they have only recently appeared on the household goods market. Such units have a lot of advantages that future owners are not always aware of. Let's look at the main pros and cons of such devices for the home.

What are wall-mounted infrared heaters?

Infrared heaters are divided into several types depending on the method and location of attachment.

What is it for and where is it used?

Wall heaters are heating devices that operate using power from the mains.

They got their name from the fact that they are placed directly on or in the wall, and thanks to the emitted rays, they heat objects in the room.

Such a device can be used not only for additional, but also for main heating. Don’t be afraid to place several of these devices in a room at once.

Their main advantage is that they do not dry out the air, maintaining its natural humidity.

Heating occurs due to the heating of surrounding objects. They provide pleasant warmth.

Some models are equipped with a thermostat from the factory. It allows you to adjust the room temperature that is most optimal for you. Such models are more expensive, but work much more efficiently.

Depending on the chosen model, you can get other useful functionality. For example, a timer, an auto-off and auto-on system, and so on.

How it works: device and principle of operation

Each device aimed at heating a room works in a special way. An infrared heater is no exception. It consists of a ceramic panel that is heated by a special element. After the temperature reaches the required level, the reflector starts up. Heat is reflected from the mirror surface and transmitted into the room in the form of rays. The rays encounter obstacles in their path in the form of objects. At the same time, it doesn’t matter at all what it is: a plant, a toy, fabric, walls. Objects begin to heat up, giving off heat to the room.

Thanks to this principle of operation, the air remains moist, and household members do not complain about dryness and headaches. Scientists compare the operating principle of such devices with the action of the sun. Its rays also glide over the surface, heating only individual objects.

Types of heating elements

Each company that produces such units offers its customers special heating elements. There are a great many of them. Let's look at the main and most effective ones:

• Halogen lamp. Suitable for installation in small spaces. Its disadvantage is that it produces too short waves, which are not enough to cover a large space.
• Metal tubular elements. A good heater that is often used in industrial areas.
• Quartz heater. It looks like a tube made of quartz. Inside it is a carbon fiber spiral. Good to use for home. The device is absolutely safe. Can be installed in medical institutions, saunas and restaurants.
• The most valued infrared heater is with a ceramic heating element. It is so safe that it can even be installed in a children's room. Its main advantage is its low energy consumption. There are a huge number of designs. It is impossible to get burned on it, and it gives off 100% heat. It takes up little space due to its almost flat structure.

Reviews of wall-mounted infrared heaters: pros and cons

By combining the knowledge gained about wall-mounted infrared heaters, you can make a summary table of the pros and cons, where all the positive and negative aspects of use will be visible.

Pros:

• High efficiency rate.
• Fast heating.
• Absolute safety.
• Easy to install.
• The kit includes fastenings.
• It works silently.
• Mobile and lightweight device.
• It is possible to maintain the set temperature.
• Heat radiation can be focused in one direction.
• Saves energy by 40%.

But one cannot help but pay attention to the disadvantages, which may become grounds for refusing to purchase.

• Low level of control intelligence.
• Expensive device with intensive study.
• Some are noisy or get very hot.

Manufacturers and popular models: ranking of the best and prices

Standard models without thermostat

1. Ballu BIH-S-0.3

   Made in a laconic white color. Serves an area of ​​25 square meters. The power will be 1,500 watts. Has a moisture protection function. It is controlled mechanically, using a remote control or buttons on the body. Cost 2,500 rub.

2. Peony Thermo Glass A-06

   White infrared heater. It is possible to purchase it in yellow, golden, brown and silver shades. Designed for an area of ​​20 square meters. The operating power of the device is 1,000 W. The cost on the market is 3,500 rubles. Lots of positive reviews about the work.

3. Hyundai H-HC2-08-UI689
   Read also:  How to make a pyrolysis oven with your own hands, drawings

   The device is in a laconic white color. Available in white, yellow, golden brown and silver. Designed for 20 square meters. Power 500 kW. Controlled using buttons on the body. The cost of the device is 1,000 rubles.

Wall mounted with thermostat

1. Mister Heat Thermal S-0.1
   The model is equipped with a thermostat. Designed for an area of ​​12 square meters. There is mechanical control and control using a remote control. There is a moisture protection function. Heating power 600 W. Cost 2,000 rub. The infrared heater is available in black and white.
2. Peony Thermo Glass P-10

   A model that is attached to the wall so close that you will hardly notice it in the interior. Flat and narrow design. Cost 2,000 rub. Heating power is about 600 watts. Designed for an area of ​​up to 10 square meters. Available only in white. When heated, the ceramic panel begins to glow yellow.

3. JARKOFF JK-9004 in the form of a picture

   A panel that is equipped with a heating function. It is possible to choose an image that will suit your interior. It is important to place the device near an outlet so as not to spoil the appearance of the room with extended wires. The power of such a picture is 500 W. Designed for a room up to 10 square meters. The downside is that the image fades over time. Therefore, it is better to use it for one-time use. Cost 2,500 rubles.

4. Heatphone ERGN 0.4 Glassar

   
   Infrared heater for an area of ​​up to 16 square meters. Heating power is about 800 watts. There is a moisture protection function. Equipped with mechanical control and remote control. Available in white and grey. Flat and thin. Cost 3,000 rub.

5. Ballu BIH-LW-1.5

   
   Infrared heater with a power of 3000 W. For rooms larger than 20 square meters. Can be used for industrial purposes. Equipped with overheating protection. The halogen lamp gets very hot, so it is not recommended to install it in a child's room. The device is made in a black case, there are chrome elements. Cost about 3,000 rubles.

Which manufacturer and which type is better to choose: TOP-3

Calculation of the minimum required power

Infrared wall heaters operate on both electricity and gas. However, we recommend purchasing a wall-mounted device only that is powered from the mains. This is the most economical and safe.

There should be about 50 watts per square meter.

That is, for a room of 10 square meters, a unit with a power of at least 500 watts is suitable. Please note that you need to determine the indicator with a margin, since there is always the possibility of energy leakage through an open door, window, and so on.

What else to consider when choosing a device?

• Once you have decided on the power, select the type of emitter. The emitter can be halogen, metal, quartz, carbon, ceramic, and so on.
• Indicate the required functionality. Consider whether you need a built-in thermostat, timer, tip-over sensor, remote control, sensor, etc.
• Solve the issue with cost and brand.

Putting all the requirements together, you will get several models that you can take a closer look at. Be sure to check out the reviews online. They will help you understand the principle of operation and what you need to pay attention to when choosing

3 best models

• Ballu Bih L 3.0. A device that heats a large area. Cost 3100 rub.
• Peony Thermo Glass a06. Cost 2,500 rub. Low power. Interesting design.
• Neoclima Gear 20. With good power, laconic design, low cost of 3000 rubles.

Price

The price list for IR devices starts from 1,500 rubles. for a panel painting. But they are not effective for large rooms and quickly break down.

If you want to purchase a device that will work for a long time, and its power will be enough for a large space, then count on an amount of 3,000 rubles.

Those who want to purchase a heater with an interesting design can spend another couple of thousand for a beautiful appearance.

In general, the more functionality as an add-on built into a particular model, the higher the cost. Devices from leading manufacturers are especially popular. The price tag increases for the brand as well.

Where to buy a wall-mounted infrared heater?

In Moscow

1. M Video. City of Moscow, MKAD, 24 kilometer, phone 8 495 77 77 77 5.
2. Heater store. Volgogradsky Prospekt, Moscow, building 32, floor 1, pavilion 2. Telephone.
3. Bartolini. City of Moscow, Baikalskaya street, building 1. Telephone 8 499 381 18 91.

In St. Petersburg

1. Almag, city of St. Petersburg, Maly prospect building 8, phone 8 931 365 46 03.
2. Warmer at home. City of St. Petersburg, Aviakonstruktorov Avenue, building 5, Telephone.
3. Heat stoves City of St. Petersburg, Telman street, building 31, telephone.

Choosing a wall heater should not be done blindly. The future buyer should be aware of the dangers and prepare for the purchase and sale transaction. Take all the tips into account, and then you will get a quality device for your room.

Apr 17, 2018ventsyst

How it works and what heats it up

Picture heaters work on the principle of the sun. Only here infrared rays are emitted by special carbon fibers.

They are insulated on top with eco-film, onto which a colorful image is applied.

Of course, the canvas itself heats up a little during operation, but as mentioned above, you won’t be able to get burned on it. If you touch the surface with your palm, you will initially feel some warmth.

However, it disappears almost instantly and after a second the hand already feels as if it were at room temperature. This effect is achieved through a zone shutdown system.

That is, as soon as the picture heater feels pressure on the surface of the tracks, they automatically turn off. This is a kind of protection against overheating and failure.

The main heating here occurs on the surface to which the painting is directly directed. It is not the air itself that is heated.

This could be a sofa, a bed, or you yourself sitting at your desk. This will create the feeling that a bright, warm sun is shining on you.

The best and most famous models: characteristics and prices

Ballu BIH-AP4-2.0

One of the smallest and thinnest panel heater units on the market. The patented case is made of stainless steel, equipped with IP54 level of protection against moisture and dust. High dust and moisture protection allows installation outdoors. The brackets included in the kit will facilitate installation of the equipment and adjustment of the required heating angle.

Ballu BIH-L-2.0

Lamp-based, multifunctional infrared heater. In addition to wall mounting, it can also be mounted on a tripod. The quartz heater is placed in a steel case and is reliably protected from damage and deformation. The lightweight design (weighs only 3.5 kg) allows you to move the device to any location. The placement is horizontal, at a height of no more than 3.5 meters.

Hyundai H-HC7-20-UI291

Modern wall-mounted infrared heater with thermostat and stylish housing. It has the highest protection against dust and moisture among similar devices - IP65 - complete protection against the penetration of dust and protection against the penetration of a direct stream of water. The light weight of the structure allows for all installation options: ceiling, wall, tripod. Adjusting the directional angle concentrates the heating flow into a given area. The presence of a mechanical thermostat allows you to set the desired heating temperature.

"Resanta IKO-2000L"

Modern heater with natural convection. The power of 2,000 W allows you to effectively heat a room up to 35 m2. Does not blow hot air, does not emit foreign odors, does not raise dust, unlike convection and heat fans. The quartz heater is equipped with a mechanical thermostat and built-in overheating protection.

"Nikaten NT 300"

Compact ceramic heater with manual temperature controller. The device is capable of heating up to 15 m2. "Nikaten NT 300" is mounted on the wall, has a small size and an attractive appearance.

"Peony Thermo Glass A-06"

This is not only a high-tech device, but also a stylish piece of furniture, one of the best wall-mounted infrared heaters for a private home and apartment. The hardened surface can withstand heavy loads and strong temperature changes (for example, if you turn on a heater in a room with sub-zero temperatures, you don’t need to worry about its further technical serviceability). The heater is silent, does not evaporate foreign odors, has no light elements, and does not raise convection dust.

How to choose - rules and features

There are always two convex strips at the top and bottom of the film heater. They prevent the painting from being pressed tightly against the wall surface.

When purchasing, pay attention to what these planks are made of. We recommend clean wood, without any coating with varnishes or paints.

Glued laminated timber would also be a bad option.

Such a heater will emit unpleasant and harmful odors during operation. These planks also provide the required distance from the wall of 2 cm.

This is necessary not only for fire safety reasons, but also to preserve the surface of the walls in their original form. For example, for some users, with prolonged use, the wallpaper begins to peel off in places where the picture is hung.

Conventional heaters and wind blowers raise dust, dry the air, and burn out oxygen. And they constantly get in the way.

With their frequent use, headaches, dry mouth and other signs of oxygen starvation occur. Warming paintings do not dry out the air and do not reduce oxygen levels in your home.

Even if dust collects on them, they do not burn it and you will not feel the corresponding smell. You can keep them on for a whole day.

Moreover, unlike simple heaters, the average power of wall film almost never exceeds 400-500W.

They are turned on through a regular outlet. At the same time, you do not have to upgrade the electrical panel or run a separate line, as for warm electric floors.

Although, of course, you may be limited by the length of the cord with the plug and the location of the nearest outlets. It is not recommended to connect them via extension cords.

Don't want continuous 24/7 work? Connect heating pictures and panels through the socket timer.

Thus, you can automatically set the optimal heating mode for the room.

Well, it is best to purchase film wall heaters equipped with a built-in temperature sensor. It hides between the lower wooden planks.

Thus, it will be impossible for the product to overheat and in emergency situations it will turn off when the temperature is exceeded.

Of the most popular models, products under the brands “Velvet Season”, “Home Hearth”, “Dobroe Teplo” are the most widespread.

And such a heating device can easily be rolled up into a tube and stored in a small box until the next cold weather.

Try hiding the bulky oil battery as well. Some of our compatriots even manage to take such wall paintings with them on long trips around Europe.

All hotels there have permafrost. Especially in autumn and spring.

Owner reviews: advantages and disadvantages

Disadvantages and cons

And now, after a colorful description of all the advantages, it’s worth talking about the disadvantages. One of the main ones is still insufficient power. As you know, to heat a room of 10 m2, on average, 1 kW of power is required.

These heaters are good in very small rooms. Don’t expect any miracles from one single picture hung in your bedroom or living room.

For example, such a film heater will never be able to raise the temperature from 18 degrees to 25. Yes, you can direct radiation from it to the bed and warm it up to a comfortable temperature. But this can be done much more efficiently and quickly using a heated blanket or sheet.

To specifically increase the temperature in the apartment, your walls should be literally hung with such warming paintings. And in this case, just forget about free sockets.

As you yourself understand, talking in this case about energy efficiency and some kind of savings would be simply ridiculous.

If you want to warm up a small room, close all the windows and entrance doors to it. Only after a day will you really be able to feel the temperature rise by several degrees.

The best ceiling infrared heaters

IR heaters that are mounted on the ceiling have a wider range of luminescence. They do not take up useful space in the room and allow you to quickly warm up spacious rooms.

"Almak" IK-13 - a powerful domestic heater

5

★★★★★

editorial assessment

92%

buyers recommend this product

The Russian-made IR heater is characterized by high performance and is suitable for rooms even with high ceilings.

It has the thinnest body compared to its analogues, and is available in various colors: white, silver, beige, dark brown and gold. This heater will fit into the interior of any room.

The model is equipped with a powerful heating element that quickly warms up the room. In rooms with good insulation, it can become the only source of heat, since the long infrared waves that it emits are safe for humans.

Advantages:

• High performance;
• Slim body;
• Variety of colors;
• Relatively light weight;
• Manufacturer's warranty – 5 years.

Flaws:

• The thermostat must be purchased separately.

The IK-13 heater from Almak is suitable for home, office and other premises with high ceilings.

NeoClima IR-1.0 – reliable heater for difficult conditions

4.8

★★★★★

editorial assessment

89%

buyers recommend this product

See review▶

The IR heater is designed to work in any conditions. It is suitable for unheated and semi-open spaces, although it can also be installed in well-insulated houses. It is possible to operate in anti-icing mode.

The device can be used in a cascade heating system, providing smooth power control.

The heater is equipped with a heating element hidden behind the panel. The body is made of steel with anti-corrosion coating. The device has two operating modes: spot and zone heating. The homeland of the heater brand is Greece, the actual country of production is Russia.

Advantages:

• Anti-icing mode;
• Hidden heating element;
• Anti-corrosion coating;
• 2 operating modes;
• Possibility of cascade connection.

Flaws:

• No remote control.

The IR-1.0 model from NeoClima is a universal heater that is suitable for various, even quite harsh operating conditions.

Ballu BIH-APL-0.6 – compact and durable

4.6

★★★★★

editorial assessment

84%

buyers recommend this product

See review▶

Universal fasteners allow you to install the heater not only to the ceiling, but also to the wall, and also hang it on a cable (for example, above a workplace). It is intended for indoor use, but can be used to de-ice and prevent surfaces from freezing.

The equipment uses energy sparingly. The heating panel makes the heater as efficient as possible, allowing you to heat surfaces in a matter of minutes. The equipment was manufactured in China, the homeland of the brand is the Netherlands.

Advantages:

• Compact dimensions;
• Universal mount;
• Anti-icing mode;
• Economical electricity consumption;
• Two types of heaters.

Flaws:

• Thermostat is not included but is available as an option.

Ballu BIH-APL-0.6 is the optimal model for small rooms, offices and industrial premises.

READ ALSO

10 Best Ceramic Heaters

Heating in the bathroom

Many people hang this picture in the bathroom. Especially if there is some kind of defect on the tile. She can cover him great.

However, even here, to increase the temperature by only 1 degree, it will take at least one hour of operation of the device. It is more reliable and safer to make a stationary electric coil or heated towel rail.

At the same time, do not forget about humidity and place the panel only in the permitted area, as well as the socket for connecting it.

The shell protection class of most devices does not exceed IP20.

Therefore, you cannot constantly keep them in a damp bathroom. You will have to bring the device in while it warms up, and then immediately remove it from the stud.

By the way, many people miss the point of reliable fastening and hang this electrical product at random. They even manage to hook it with a pin, so as not to damage the walls.

Meanwhile, this is one of the main factors of safe operation. Some users have had cases when the film heater came off the stud and its heating strips fell directly onto the power cord.

You can read the consequences in the review.

Best Gas Wall Heaters

Such devices can operate from gas in the main line or from liquefied fuel in a cylinder. They are used as the main heating due to their increased power.

Inside there is a burner and a panel that provides heat distribution and air convection. During installation, the devices need to vent combustion products outside.

Alpine Air NGS-50F - for a studio apartment

This is the best gas wall heater for a spacious studio apartment that does not have internal partitions to retain heat. One device can heat up to 49 m2, so by placing it on an external wall you can arrange individual heating in the apartment.

The heater design has rounded edges with perforations for air intake and outlet. All combustion products are removed outside, so there is no dry air in the room.

Pros:

• warranty from the Turkish manufacturer for 3 years;
• beautiful view that matches any room interior;
• large heated area;
• powder coating on a metal body;
• There is a cast iron heat exchanger inside, so the heat lasts longer even after turning off;
• small dimensions 600x600 mm;
• built-in thermostat that controls temperature and saves gas;
• quiet operation;
• frost protection;
• quick heating of the room (efficiency 86%);
• The built-in fan speeds up the circulation of heated air.

Minuses:

• gas pipeline or cylinders are required;
• cost from 26,000 rubles;
• needs to be connected to electricity;
• can only be mounted on a wall adjacent to the street;
• more complex installation due to drilling a large hole for the chimney in the supporting support.

Color change and workmanship

Another disadvantage is changing the background of the picture. If you initially chose a painting in white tones, then do not be surprised that over time it may turn yellow.

And black stripes of carbon thread will clearly protrude on the front side.

Therefore, it is advisable to choose film heating patterns in dark colors, without bright contrasting patterns. Otherwise, even if the heater works properly, after some time you will be ashamed to hang such a yellowed miracle in front of your guests.

By the way, paper and wallpaper that are directly exposed to infrared rays for a long time turn yellow in the same way as they do from the sun.

These devices quickly reach the set temperature (from 10 seconds to a minute), but they cool down almost instantly after they are unplugged. There is no talk here of any inertia like that of oil batteries, or even more so, like that of heated floors.

And when purchasing, carefully check the integrity of all current-carrying paths. We are, of course, not talking about outright handicraft, which is revealed by the naked eye.

But even high-quality goods during transportation or storage in a warehouse can get caught or scratched by something. The heating may and will work, but it is clearly not the 50 thousand hours declared by the manufacturer.

Fire hazard and operating rules

You can find reviews on the Internet with information that such products are a fire hazard and at one “wonderful” moment they can burst into blue flame.

To prevent this from happening to you, do not buy cheap Chinese products without certificates and follow the basic rules for using film heating pads:

• the canvas can be rolled into a tube, but it must not be bent at right angles

• cannot be included in the network in an unexpanded state

• It is forbidden to cover the top with any kind of cloth, especially to lie down on it, putting it in bed instead of a sheet under the mattress

Many manufacturers place this warning on the front of the product.

• You also can’t use them to dry things by hanging compartments or fruit in the closet.

There are other specially designed devices for this.

• long-term use in damp areas without appropriate IP protection

It turns out that such heating paintings should under no circumstances be considered as an independent type of room heating. Otherwise you will be very disappointed in them.

But to maintain a comfortable temperature on cool autumn evenings, when full heating has not yet been provided, or it simply does not exist (for example, at the dacha), they can come in handy.

But here, too, proceed from the heating area - one film infrared picture with a power of 500 W per 10 m2.

If the room is larger, add the number of heaters accordingly. This is assuming you have a well-insulated and energy-efficient home overall.

Prices: summary table

Wall-mounted infrared heaters are an excellent alternative to their predecessors, traditional radiators. Suitable for main and auxiliary heating. A modern energy-saving heater is profitable to buy despite its initial cost. Stylish design fits perfectly into any interior.