TOP 15 best geysers for an apartment: 2021-2022 rating for reliability and quality and which model with flame modulation to choose

Rating of the TOP 15 best geysers of 2021-2022

Neva 4610

Most of the equipment of this type is quite expensive. But the Neva 4610 model is an exception. With quite impressive performance characteristics and reliability, it has a relatively low price - in the range of 7-8 thousand rubles. Foreign analogues are an order of magnitude more expensive with almost identical operating parameters.

Neva 4610 has the following performance characteristics:

• power (maximum), kW – 17.5;
• productivity, l/min – not less than 10;
• minimum operating pressure, bar – 0.15.

At the same time, the distinctive feature of this model is its extremely modest overall dimensions:

• height, mm – 610;
• width, mm – 350;
• depth, mm – 185.

Rice. 1 Neva 4610

The main advantages of this model include the following:

• automatic ignition using batteries - no need to connect to the electrical network;
• compact size, ascetic and elegant design;
• simple mechanical control;
• reliability - due to an extremely simple design;
• excellent performance – especially considering the cost and dimensions.

Video review of the gas boiler Neva 4610.

How to choose a gas water heater?

The main criteria that must be assessed when choosing a column:

1. Power . The parameter determines the water productivity of the device. The higher the power, the more hot water can be supplied to more points.
2. Inlet pressure . Affects the ability to supply water at low pressure. Many modern models allow water supply at low flow rates.
3. Safety . The dispensers are equipped with a protection system against overheating and freezing, as well as a sensor to turn off the unit and stop the gas supply in the event of a leak.

Important nuances

Choosing the right geyser so that it functions smoothly for many years requires taking into account the following important nuances:

• The heat exchanger must be made of copper.
• The larger the flow diameter of the heat exchanger pipe, the less likely it is that it will need to be cleaned of scale and debris.
• The water block should also be made of hard metal to prevent stripping of threads during regular membrane and filter replacement procedures.

Advice! Correct calculation of air exchange allows you to determine which column to choose in a particular case. This value is prescribed by sanitary standards, depends on the power of the unit and the volume of the room and shows how many times the atmosphere of the room in which the gas equipment is installed must be renewed within an hour.

The best geysers for an apartment in terms of price/quality ratio

If you need to organize hot water supply in your house, it is important to choose a high-quality geyser. We have compiled a rating of 3 models based on consumer reviews, the characteristics of which live up to expectations.

Bosch WR 10-2P23

Budget equipment from a famous German manufacturer . The thermal power of the column is 17.4 kW. Due to this, 10 liters of water per minute are supplied.

In this case, the water is heated to +60 degrees, and the device itself operates at a pressure of 0.1012 atmospheres.

Stable water heating is ensured by a copper heat exchanger . Ignition is carried out manually using the built-in pierre ignition.

The device is equipped with a constantly burning pilot light.

Combustion products exit through an open chamber . A chimney with a diameter of 112.5 mm is required. To ensure safe use, the column is equipped with protective sensors.

Characteristics:

• productivity - 10 l/min;
• power - 17.40 kW;
• pressure - 0.10-12 atm.;
• dimensions - 310x580x22 mm;
• weight - 11 kg.

pros

• low price;
• compact size;
• maintainability;
• simple design.

Minuses

• Includes 1 hose with 1/2 external thread;
• The bath is slowly pouring.

Electrolux GWH 14 NanoPlus 2.0

An inexpensive unit from one of the leaders in the production of equipment . Characterized by high

efficiency - supplies up to 14 liters of water per minute.

This is an excellent indicator given the high thermal power of 28 kW and the copper heat exchanger. This indicator is enough for 2-3 points.

The outlet pressure is 0.»0-8 atmospheres.

The exhaust gas is discharged through an open chamber. To operate the column, a chimney with a diameter of 125 mm is required.

The water instantly heats up to +60 degrees.

Operational safety is due to the presence of gas control, a sensor against overheating and switching on of equipment if there is no traction. The unit is controlled mechanically. Indication of switching on and heating is provided.

Characteristics:

• productivity - 14 l/min;
• power - 28 kW;
• pressure - 0.20-8 atm.;
• dimensions - 400x650x196 mm;
• weight - 11.21 kg.

pros

• performing all functions;
• enough power for 2 points;
• turns off when overheated;
• neat switches.

Minuses

• there is a pop when turned on;
• makes noise.

Zanussi GWH 10 Fonte Turbo

A speaker in a stainless steel case from a famous Italian brand . Column

equipped with a display.

Operation is simple using mechanical switches. One of the distinctive features is the presence of indicators, thanks to which you can monitor the progress of water heating.

The product is equipped with a fan and a chimney for forced removal of smoke.

Productivity is high due to the power of 20 kW. At the outlet, the minimum pressure is 0.30 atmospheres.

The column is equipped with a fan and a chimney for forced smoke removal.

Waste products are discharged through a pipe with a diameter of 60 mm through an exhaust hood.

Characteristics:

• productivity - 10 l/min;
• power - 20 kW;
• pressure - 0.30-8 atm.;
• dimensions - 330x550x190 mm;
• weight - 10.4 kg.

pros

• automatic ignition;
• flame control;
• overheat protection system;
• display.

Minuses

• non-standard chimney size;
• noisy work.

The best manufacturers

Many well-known companies produce instantaneous gas water heaters, characterized by high technical characteristics and rich functionality.

According to buyers and experts, the best among them are:

1. Zanussi. An Italian brand that specializes in the production of household appliances and electronics for a comfortable life.
2. Bosch. A well-known German brand that produces high-quality equipment at affordable prices.
3. Electrolux. A proven Swedish developer, one of the world's leading manufacturers of professional and household appliances.
4. Gorenje. A Slovenian company whose equipment is famous for its reliability, high level of safety and long service life.
5. Ariston. An Italian brand that has been producing high-quality home appliances for many years.

The best geysers with an open combustion chamber

Installation of a column with an open chamber is possible if there is a chimney with natural draft. We suggest you familiarize yourself with 3 models from famous brands that are in great demand in 2021-2022.

Electrolux GWH 11 PRO Inverter

Flow-through geyser with natural removal of combustion products through the chimney.

Runs exclusively on natural gas.

The equipment has excellent performance of up to 11 liters per minute. Due to the power of 22 kW, the water quickly heats up to 80 degrees Celsius.

The device works if the water pressure in the system is 0.15-7.89 atmospheres.

Operation of the device is comfortable due to the presence of indicators and an electronic control system with automatic ignition.

The model is complemented by a compact display with a thermometer.

Safety of use is facilitated by the presence of a heating limiter, a sensor to turn off the device when overheated, and a self-diagnosis mode that allows timely detection of a malfunction.

Characteristics:

• productivity - 11 l/min;
• power - 22 kW;
• pressure - 0.15-7.89 atm.;
• dimensions - 330x550x190 mm;
• weight - 8.55 kg.

pros

• strength of materials;
• compactness;
• maintains temperature;
• easy wall mounting;

Minuses

• takes a long time to turn on.

Electrolux GWH 12 NanoPlus 2.0

Comfortable, simple and safe to use speaker . Presented on average

price segment.

The device has an automatic ignition, for which you need to install batteries.

The unit is easy to control thanks to a simple panel with mechanical switches.

The column is safe to use due to multi-level protection: a sensor for gas leaks and ingress of waste product into the room.

There is an indication when the water is turned on and heated . The water supply is 12 l/min thanks to a thermal power of 24 kW.

Combustion products come out using natural draft. To install the equipment, a chimney with a diameter of 110 mm is required.

Characteristics:

• productivity - 12 l/min;
• power - 24 kW;
• pressure - 0.15-8 atm.;
• dimensions - 350x610x183 mm;
• weight - 8.22 kg.

pros

• slight noise during operation;
• heats water quickly;
• economical battery consumption;
• digital temperature display.

Minuses

• Alkaline batteries are not suitable;
• weak flame when turning the switch fully.

Zanussi GWH 12 Fonte

Reliable and safe to use equipment . Made in durable steel

enamel coated body.

Only natural gas is suitable for operation. The column interacts with water at a pressure of 0.15 to 8 atmospheres.

Equipped with an open combustion chamber . The standard chimney diameter is 110 mm.

The water almost instantly heats up to 60 degrees thanks to the high thermal power of the column - 24 kW.

This makes it possible to provide a capacity of 12 liters per minute.

The model is complemented by a display with temperature indication, a gas control option and a sensor that turns off the equipment in case of overheating.

The heating efficiency is due to the presence of a copper heat exchanger.

Characteristics:

• productivity - 12 l/min;
• power - 24 kW;
• pressure - 0.15-8 atm.;
• dimensions - 350x610x190 mm;
• weight - 9 kg.

pros

• durable body;
• heats water quickly;
• enough for 3 points;
• performs its functions.

Minuses

• loud noise;
• pressure is lower than specified.

Burner

The burner is the most important element of the water heater. In Neva equipment it is made of high-quality steel, which ensures reliability and a long service life. It is ignited by automatic ignition, which runs on batteries. Many versions have a flame modulation system, which allows you to set the desired temperature and maintain it for a long time.

Built-in safety sensors automatically extinguish the burner in the event of a malfunction of the device. Automatic ignition occurs when the tap with hot liquid is turned on. When turned off, the flame goes out.

During normal operation of the heater, the flame on the burner is blue. If yellow tints or soot appear, it should be cleaned. For this:

1. The equipment turns off and the gas supply is cut off. It is disassembled and the burner is removed.
2. A brush is used to remove soot and dust from the outer surface, and a special brush is used to clean the inside.
3. Wipe the nozzle and collector with a damp cloth. It is also important to clean the electrodes and their contacts.

The burner itself is washed with soapy water and dried well. After this procedure, the column is put back together, the contacts are checked, gas is supplied, and the system is started.

We recommend an article on the topic! Technical characteristics of geysers BaltGaz.

The best geysers with a closed combustion chamber

For installation in apartments, dispensers with a closed combustion chamber with combustion products discharged through a special pipe are suitable. Such models are simple and safe to use. We included the 3 best models in the rating according to customers.

Ariston NEXT EVO SFT 11 NG EXP

Column in a steel case in silver color . Natural and

liquefied gas. With its help, up to 11 liters of water are supplied per minute. This is due to the presence of a copper heat exchanger and a thermal power of 19.58 kW.

The outlet pressure ranges from 1 to 8.50 atm.

The model is complemented by electronic ignition, built-in indicators for turning on and an integrated security system: gas control, heating temperature sensor, frost protection.

There is also auto diagnostics . The system quickly identifies the cause of the malfunction. The speaker is connected to a standard outlet using a 1.5-meter power cord.

Characteristics:

• productivity - 11 l/min;
• power - 19.58 kW;
• pressure - 1-8.5 atm.;
• dimensions - 330x550x167 mm;
• weight - 12 kg.

pros

• easy adjustment of settings;
• heating water immediately after opening the tap;
• simple maintenance.

Minuses

• makes a lot of noise;
• Sometimes it turns on with a bang.

Bosch WTD 27 AME

The equipment is designed for use in residential and commercial premises (gyms, restaurants, etc.).

Features high performance. Provides 27 liters of water per minute. A cascade connection is possible, which will increase the flow rate by 10 times.

The device consumes resources economically and operates even at low pressure (from 0.3 atmospheres).

Among the distinctive features of the speaker are its compact size, electric ignition and backlit panel.

You can control the device using the remote control. The column is supplemented with ionization flame control, protection against overheating, freezing and reverse draft.

Characteristics:

• productivity - 27 l/min;
• power - 47 kW;
• pressure - 0.30-12 atm.;
• dimensions - 452x775x259 mm;
• weight - 34 kg.

pros

• silent operation;
• enough for a large number of points;
• smooth settings;
• quick start.

Minuses

• difficulties with replacing the coarse filter.

Bosch WT 13 AM1E

Column from a reliable brand with a flow-through water heating system and a closed combustion chamber.

The spent product is removed using forced exhaust. The device has a thermometer for temperature control, working in conjunction with a flame modulator system.

The same system is responsible for fuel supply and water flow taking into account the selected temperature.

The column is connected to a standard 220 V network. It has a high productivity of 13 l/min.

The equipment power is 22.60 kW, and the outlet pressure is from 0.30 atm.

It can operate on both natural and liquefied gas. The panel displays an indication when turned on and when heating.

Characteristics:

• productivity - 12 l/min;
• power - 22.60 kW;
• pressure - 0.30-12 atm.;
• dimensions - 388x700x220 mm;
• weight - 23 kg.

pros

• durable steel body;
• simple maintenance;
• enough for 3 mixers;
• convenient control.

Minuses

• quickly becomes covered with scale;
• thin radiator.

Characteristics of NEVA 4511

The water heater is similar to model 4510 in terms of ignition type, color design, and the presence of an LCD display. But the power and performance are different: 21 kW and 11 l/min. In addition, the copper heat exchanger here is slightly larger than in the previous heater. It is made without tin and lead.

The manufacturer himself calls model 4511 a bestseller. However, some buyers regret the purchase. People don’t like the rapid wear of parts and possible interruptions in the operation of the column. Among the advantages, users cite compact size, reliability, and the ability to regulate the water temperature.

The best geysers with high performance from 10 l/min

A larger family requires a reliable water heater that can supply hot water to several points at once. We have selected the best models of geysers for 2021-2022 with a capacity of 10 liters per minute.

Zanussi GWH 10 Fonte

This geyser is equipped with manual ignition . The design is presented in the form of a handle,

when rotated smoothly, the size of the flame increases.

To the right of it is a switch that is responsible for the volume of water supplied.

The design includes a display showing the water temperature, which turns on immediately after opening the tap.

The device allows for a flow of 10 l/min with a thermal power of 20 kW. Smoke is removed through natural ventilation.

The chimney diameter should be 110 mm . It is designed to operate only on natural gas. During the heating process, the equipment makes virtually no noise.

Characteristics:

• productivity - 10 l/min;
• power - 20 kW;
• pressure - 0.15-8 atm.;
• dimensions - 330x550x189 mm;
• weight - 8.2 kg.

pros

• price-quality ratio;
• durable steel body;
• easy installation;
• indicators.

Minuses

• thin heat exchanger wall;
• batteries need to be changed.

BAXI SIG-2 11i

This speaker is perfect for household needs . It is easy to install, just like

service. The device is equipped with various protective sensors, which eliminates damage in the absence of water and gas leakage.

The productivity is 10.9 liters per minute due to the power of 19 kW.

Combustion products exit through the open chamber.

Switching on occurs using automatic electronic ignition. The water almost instantly heats up to a temperature of +60 °C.

The unit is equipped with a modulating burner with smooth power control taking into account the volume of water consumption.

Due to the built-in gearbox, operation at a pressure of 13.5 - 20.0 atmospheres is possible.

Characteristics:

• productivity - 10.9 l/min;
• power - 19 kW;
• pressure - 0.20-10 atm.;
• dimensions - 314x592x245 mm;
• weight - 11.1 kg.

pros

• compact size;
• water temperature display;
• no temperature fluctuations;
• works with low pressure.

Minuses

• lack of anti-corrosion coating on the radiator;
• noisy work.

Zanussi GWH 12 Fonte Turbo

Convenient and safe to use equipment, powered only by main gas.

Suitable for installation in rooms without a chimney, as it is equipped with a forced exhaust system for combustion products.

The heating efficiency is due to a copper heat exchanger and a thermal power of 24 kW. 12 liters of water are supplied per minute.

To connect a closed combustion chamber there is a hole with a diameter of 60 mm.

The declared service life of the unit is at least 10 years.

This is facilitated by high-quality assembly and a set of protective sensors, including against overheating of equipment and for turning on the device in the event of a gas leak.

Characteristics:

• productivity - 12 l/min;
• power - 24 kW;
• pressure - 0.20-10 atm.;
• dimensions - 350x610x190 mm;
• weight - 10.95 kg.

pros

• heating power adjustment;
• attractive design;
• no interruptions in work;
• maintaining constant temperature.

Minuses

• the exhaust pipe is not included;
• no frost protection.

Selection options

A water heater with a storage tank or a gas instantaneous water heater - the consumer decides which of these two options to choose based on personal preferences and future operating conditions. However, there are a number of parameters that affect the technical characteristics of the device:

• Maximum volume of tap water consumed.
• Mechanisms for regulating water and gas supply.
• Burner ignition method.
• The principle of removal of combustion products.
• Oxygen flow diagram.
• Power.

Let's look at them in more detail.

Largest volume of water consumed

The first thing you need to do before buying a specific model of a geyser is to calculate the actual volume of water consumed in the house. The procedure is carried out as follows:

• When the taps are closed, the value of the water meter is recorded.
• At the same time, the taps of all sources of consumption to which water from the device will flow are turned on at full power.
• The stopwatch counts down exactly 60 seconds. Then all taps are closed simultaneously.
• The counter readings are taken again.

Calculation of the performance of a gas water heater Source bosch-climate.ru
The difference between the values ​​before and after turning on the taps for 1 minute will be the necessary indicator of the highest water consumption by the water heater. As a rule, this parameter varies within a range not exceeding 10-18 liters/min.

See also: Catalog of companies that specialize in autonomous gasification of country houses

Regulation of water and gas

Control of the water heating level can be carried out in two modes:

• Manually.

For control, there are two valves in the device body - water and gas supply. An increase in gas flow increases the intensity of gas combustion and water heating increases. If its consumption increases, the temperature drops. In this case, the user can reduce the water flow into the heat exchanger.

The disadvantage is a sharp drop in temperature in the mixers when the second consumer is suddenly turned on, which can be especially negative if the first is a shower user.

• Auto.

An automatic geyser, unlike the option described above, independently maintains the water heating level regardless of changes in its flow. This happens due to a corresponding modification of the flame intensity.

Automatic gas water heater Source tehnofaq.ru

Important! Some car speakers are equipped with super-intensive burners. Therefore, with an increase in the consumption flow and its reverse stabilization, superheated water is supplied for a certain time. Because of this, the user has to wait a certain time until the temperature returns to normal. All this leads to excessive consumption of resources and inconvenience in operation.

Ignition of the burner

When looking for an answer to the question of which column is better, we must not forget about the ignition method. There are three main options:

• Piezo element.

This is done by pressing a special button. Such models are more reliable than those operating in auto mode and allow you to control the gas flow manually. In addition, for ease of use, they are equipped with pilot ignition systems that are triggered when the device reads the water flow.

• Batteries.

Initiation occurs from a spark that occurs when the contacts from the batteries are shortened during water consumption. The disadvantages of the design are the possibility of rapid failure of batteries due to high room humidity.

• Hydrogenerator.

The ignition device is activated when the valve is opened. If the housing is not insulated, a whistling sound may be heard during operation.

Gas water heater with hydro generator Source dom-kotlov.ru

Advice! Modern safety systems help the consumer understand which gas water heater to choose in order to prevent the development of emergency situations during operation. Thus, the best models are equipped with flame, gas flow, exhaust, heating and ionization sensors.

Gas outlet

A device of this type not only consumes fuel, but also produces combustion products. Therefore, when deciding what a safe geyser is - which one is better in terms of exhaust gas removal, you need to pay attention to such important details as:

• Method of disposal of combustion products.
• Device power.
• Presence of a chimney.
• Arrangement of an exhaust and ventilation system in the rooms where the water heater will be installed.

The more powerful the device, the more exhaust gas it emits, and the more perfect the chimney system should be for it.

Note! Some modern models do not include a chimney. However, this does not mean that they can be used in their original form. Turning them on indoors can lead to carbon monoxide poisoning and other exhaust products.

Gas water heater with chimney Source topventilyaciya.ru

The best geysers with flame modulation

Devices with modulation do not have such a disadvantage as a decrease in water temperature at low pressure. We offer a rating of the 3 best geysers with flame modulation for 2021-2022, which are in particular demand.

Electrolux GWH 10 High Performance Eco

The first place in the rating was taken by a flow-through gas heater from the famous Electrolux brand.

The model is made of stainless steel and coated in silver.

Equipped with a combustion chamber with combustion products removed through natural ventilation.

To install the equipment, a chimney with a standard diameter of 110 mm is required.

Due to the thermal power of 20 kW, 10 liters of water per minute are supplied. Controlling the speaker is simple using an electronic panel.

Ignition is carried out automatically.

The display has a power and temperature indicator. The model is supplemented with gas control and a self-diagnosis system.

Characteristics:

• productivity - 10 l/min;
• power - 20 kW;
• pressure - 0.15-7.90 atm;
• dimensions - 330x550x190 mm;
• weight - 8.08 kg.

pros

• display showing water temperature;
• stainless steel burner;
• compact size;
• standard chimney.

Minuses

• noise when the tap is suddenly closed.

Bosch W 10 KB

Reliable and safe to use equipment that can instantly supply water to 2-3 points.

The speaker is suitable for home use. Safety of operation is ensured by protective sensors against overheating and gas leakage. The body is made of stainless steel.

The heat exchanger is made of copper, which ensures rapid heating of water to maximum temperature.

The column has a capacity of 10 liters per minute with a power of 17.40 kW. A mechanical switch is provided to regulate the temperature and power of water flow.

The device operates at low pressure from 0.15 bar . It is possible to use both natural and liquefied fuels.

The electronic ignition system runs on batteries.

Characteristics:

• productivity - 10 l/min;
• power - 17.40 kW;
• pressure - 0.15-12 atm.;
• dimensions - 400x850x370 mm;
• weight - 10 kg.

pros

• low price;
• simple installation;
• low pressure operation;
• high-quality assembly.

Minuses

• clicking sound when igniting;
• no automatic temperature control.

BAXI SIG-2 14i

Practical and reliable design from an Italian manufacturer . Equipped with copper

heat exchanger, due to which the water is instantly heated.

Safe to use thanks to gas control and temperature limiter.

Almost instantly heats water to 60 degrees Celsius.

The efficiency of water heating is due to the thermal power of 23.70 kW.

The column is enough to provide hot water supply to 2-3 points, since 13.6 liters of water are supplied per minute.

The water power flow adjustment is controlled by a mechanical switch. The equipment operates at a system pressure of 0.20 atmospheres.

Characteristics:

• productivity - 13.6 l/min;
• power - 23.70 kW;
• pressure - 0.20-10 atm.;
• dimensions - 363x650x245 mm;
• weight - 12.6 kg.

pros

• works with low water pressure;
• practically no noise;
• the water temperature is maintained.

Minuses

• metal crackling when turned on.

Operating principle of the device

To make the right choice, you need to understand the structure and operating principle of the column. It is also called a flow heater.

Two tubes are connected to the body. One supplies gas, the other water. When water is supplied to the mains, pressure arises, which acts on the membrane. She bends and opens the gas valve. The burner fires and heats the water, which passes through the heat exchanger coil. The flow comes out when the mixer is opened.

In order to choose the right device for your cottage or home, you need to take into account the parameters of the equipment and the condition of the water supply line. The correct setting of the device will depend on the pressure in the system. Read how to set up and adjust the gas water heater in the previous article.

Advantages and disadvantages of geysers

The advantages of a gas water heater include::

• provision of unlimited hot water;
• large selection of equipment at budget prices;
• undemanding water pressure for most devices;
• compact dimensions allow you to install the equipment in a small apartment;
• possibility of repair if parts break;
• significant savings, since gas costs less than electricity.

There are fewer disadvantages of a gas water heater:

• for the safe operation of the equipment, it is necessary to ensure the supply of fresh air and the organization of exhaust gas removal;
• the need for regular maintenance;
• costs of design documentation for installing a column.

Device

Neva water heaters are made of copper alloys. The gas water heater consists of the following elements:

• copper case with viewing window, display;
• burner;
• candle to create a spark;
• gas and water control knobs;
• fittings for supplying and discharging liquid;
• battery compartment;
• drain hole;
• flame, draft, temperature control sensors;
• chimney;
• fasteners.

The system operates by burning gas, so installation of the equipment is carried out by gas service employees. The work is carried out in compliance with safety regulations.

Such water heating geysers have installation-related features:

• the room where the Neva gas heater will be located must be non-residential, with an area of ​​at least 8 m3;
• It is necessary to carry out good ventilation to ensure ventilation;
• walls and floors are covered with heat-resistant materials;
• the distance from the side walls should be such that you can freely approach the device for maintenance and switching on;
• the chimney is installed with a strong attachment to the column;
• For long-term operation of the equipment, it is recommended to install a water and gas purification filter.

After installation of the equipment, the elements are checked for leaks and draft, and the system is started.

For long-term and high-quality operation of Neva geysers, it is important to follow the operating rules:

• carry out maintenance once a year - clean the burner, wash the heat exchanger, change the seals;
• to remove dust from the surface, wipe with a damp or dry cloth;
• if scale forms in the tank, rinse it with citric acid;
• Replace ignition batteries regularly.

In the event of a breakdown, the Neva gas water heater is repaired. The instructions describe possible breakdowns and rules for carrying out repair work. You can contact the seller or manufacturer to replace spare parts under warranty.

We recommend an article on the topic! Technical characteristics of Superflame geysers.

Operating principle of a geyser

Modern speakers have been improved, so the principle of operation is much simpler than that of outdated models. To start, you need to open the mixer tap.

Immediately after this:

• water enters the unit, opening the valve for gas supply;
• the flame ignites automatically;
• hot water is directed to the mixer;
• the waste product is discharged through a chimney or coaxial pipe;
• after closing the tap, the supply of water and fuel stops.

Speaker manufacturer information

The Baltic Gas Company (BaltGaz Group) has been operating since 1995. Today the concern is the Russian market leader in the development, production and sale of gas water heaters and boilers.

The group includes two large plants: St. Petersburg Gazapparat and Armavir Gas Plant. equipment." The concern sells finished equipment and spare parts wholesale and retail to household and industrial consumers. Sales points are open in more than 1,500 settlements in the Russian Federation and neighboring countries. The number of authorized service centers is more than 400.

BaltGaz Group products combine Russian engineering experience and advanced European technologies. Gas water heaters are produced under the Neva and Neva Lux brands (NEVA and NEVA LUX). The quality of their workmanship and the level of environmental safety meet international standards, and the price is lower than that of foreign analogues.

Neva 6014

The Neva 6014 has the most stylish appearance of the entire model line. This modification is equipped with a high-tech body in a steel-gray color. It has a large number of advantages, while its cost is relatively low - only 13.9 thousand rubles. It is equipped with a large amount of automation, which makes use extremely simple and convenient. Neva 6014 is very easy to install due to its light weight and modest overall dimensions. Perfect for installation in an apartment or a private house.

Performance characteristics of the Neva 6014 column:

• maximum power, kW – 28;
• productivity, l/mni – 14;
• weight, kg – 13.

Despite the rather impressive performance parameters, this model has relatively modest overall dimensions:

• height, mm – 650;
• width, mm – 350;
• depth, mm – 240.

Rice. 5 Neva 6014

The most important advantages of this model include the following:

• the presence of a digital display - for setting the required temperature using special buttons;
• multi-level protection system;
• automatic piezoelectric element;
• indicator indicating the battery charge level;
• the combustion chamber has special water cooling.

Video review of the gas boiler Neva 6014.