Steel heating boiler "Siberia". Manual

Today, the Russian heating equipment market is flooded with heat generators from various manufacturers, among which German and Italian brands have always been the leaders. However, in the last decade it has become clear that imported boiler systems have not only advantages, but also disadvantages, including: high requirements for coolant quality and operating conditions. In this vein, the domestic consumer has no choice but to pay attention to boiler units of domestic brands. In this publication, we will look at the products of Rostovgazoapparat CJSC in as much detail as possible and find out whether the Siberia floor-standing gas boiler as the manufacturer describes its advantages?

Features of Siberia gas boilers: review of floor-standing units

Siberia floor-standing appeared on the market not so long ago, but have already earned good reviews from customers and specialists.
The Siberia boiler is a product of the famous Russian enterprise “Rostovgazoapparat” (Rostov-on-Don), whose history dates back to the end of the 19th Century. This Rostov company became known thanks to the legendary AOGV gas boilers, which heated the private homes of millions of residents of the former USSR. But time does not stand still; all competitors on the market are constantly improving their products. Rostovgazoapparat also did not stand aside, presenting to the consumer a modern gas heating unit - the Siberia gas boiler.

We will talk about this device today, having examined in detail the double-circuit and single-circuit models with an atmospheric burner presented in stores, their technical characteristics, features and internal structure according to its operating instructions (passport).

Having analyzed all the parameters of the Siberia gas boiler 11, 17, 23, 29 and 35, we will leave our review based on the advantages and disadvantages of this device for heating a private home, and also watch a video about possible malfunctions: why it does not light up and does not heat the water.

Model range of Siberia boilers

On the domestic market, the Rostov enterprise is represented by two types of floor-standing gas boilers of the Siberia series:

— with a steel heat exchanger; — with a cast iron heat exchanger.

Boiler Siberia 11 with SIT automation

All boilers have a modern appearance, in contrast to the models of the “Soviet” AOGV series, the necessary set of functions and a reliable security system. All devices are completely energy-independent and operate at low gas pressure, i.e. adapted for Russian operating conditions.

In addition, the Rostovgazoapparat enterprise offers customers different types of its devices:

— single-circuit gas boilers Siberia, intended only for heating; - double-circuit gas boilers that already perform two useful functions: heating and hot water supply.

The most popular, judging by consumer reviews, are single-circuit models of Siberia boilers. They are produced in different capacities: 11, 17, 23, 29 and 35 kW. Only boilers with a steel heat exchanger are produced as double-circuit ones, and with a cast iron one - only for heating.

Siberia gas boilers with a cast iron heat exchanger are characterized by high reliability and long service life of the device, thanks to the material of its manufacture. They are produced with a nominal power of 16 to 50 kW, are capable of heating a room up to 500 m2, and are marked as follows:

— Siberia Ch16 (KCHGO 16); — Siberia Ch25 (KCHGO 25); — Siberia Ch40 (KCHGO 40); — Siberia Ch50 (KCHGO 50).

“H” is a cast iron boiler, and the number indicates the power of this heating apparatus. “KCHGO” is a cast iron gas heating boiler.

Floor-standing gas boilers Siberia

— Siberia 16E; — Siberia 25E; — Siberia 40E; — Siberia 50E.

Gas boiler Siberia: design and automation

Like most floor-standing gas boilers, heating devices of the Siberia brand consist of a housing, a heat exchanger for heating the coolant (water jacket), a gas burner and automation.

The Siberia gas boiler is equipped with a steel or cast iron heat exchanger, Italian SIT automatic equipment (gas valve, thermostat, piezo ignition and boiler safety system), a Polidoro gas burner made of stainless steel, as well as a layer of foil thermal insulation with basalt fiber.

Let's take a closer look at the internal structure of the Siberia single-circuit gas boiler according to the instruction diagram.

Siberia boiler design

Gas boiler Siberia: technical characteristics, dimensions, connection

The Siberia boiler has compact dimensions, and depending on the model, its dimensions are only 850/280/560 or 850/380/560 mm. The fittings for connecting to the heating system have a diameter: for a device with a power of 11 kW - 1 1/2′, for others - 2′.

The gas connection to the boiler is made using a bellows hose with a diameter of 3/4′, for a device with a power of 11 kW - 1/2′. And for domestic water - also 1/2′ for all dual-circuit models. Boiler chimney diameter: on Siberia 11 and 17 units - 125 mm, on more powerful models - 140 mm. Other technical characteristics, gas consumption and productivity are described in the table.

Siberia boiler: technical characteristics

— time-tested manufacturer; — compact dimensions; — modern Italian automatic equipment is installed on all models; — quiet operation; — efficiency of at least 90%; — wide model range; — reasonable price for the boiler and spare parts.

Disadvantages of Siberia boilers:

- low hot water productivity for dual-circuit models; — Russian assembly; — the network of service centers throughout the country is poorly developed.

So, we have examined Siberia floor-standing gas boilers , customer reviews of which are increasingly found on the Internet: on forums and stores. We reviewed the technical characteristics according to the instructions, features and internal structure of heating devices produced by the Rostovgazoapparat enterprise. We identified the main advantages and pointed out some disadvantages of Siberia boilers. Let's watch a video review from the buyer about the experience of using the device.

Despite the enormous popularity of foreign household appliances, the domestic industry also produces high-quality equipment. For example, Siberia gas boilers have many advantages and high quality. This equipment can be used to heat not only residential but also industrial premises.

Advantages and disadvantages

Let's look at the main advantages and disadvantages of the devices in order to determine which gas boiler to choose for heating a private home and what you should pay attention to. The advantages include:. The advantages include:

The advantages include:

• Low noise level.
• Automatic control and security system.
• Wide range of Siberia boilers.
• Undemanding to the quality of water and gas.
• Possibility of functioning at low pressure.
• Reliability of the metal alloys used.
• Italian developments in critical areas.
• Energy independence.

Among the disadvantages of Siberia boilers it is worth noting:

• The need to obtain permission for installation from the gas service.
• Increased fire hazard of equipment.
• Absence of condensing units in the line.
• Needs to be located near an external wall.
• Requires installation of a chimney.

Cost and brief description of Siberia

There is a wide variety of Siberia devices on the market; we will review the range of Russian gas heaters from the main line of this manufacturer.

Buying Tips

Before choosing a Siberia speaker for heating your home, we suggest that you familiarize yourself with the recommendations:

• Boilers can be converted for liquefied gas, this will require replacing the pilot nozzles and the main part of the burner.
• If the budget is not limited by strict limits, it is better to choose a boiler with a cast iron heat exchanger; according to reviews, Siberia made from this material has a service life of 2.5 times higher.
• Even when purchasing a model without hot water supply, it is additionally organized using an indirect water heater.
• To quickly determine the required boiler power, an approximate relationship is used: 1 kW per 10 square meters of room. But we must not forget about the degree of insulation of the building. For example, for poorly insulated buildings the ratio can be 1 to 7, and for houses with a good thermal layer - 1 to 13-15.

The description of Siberia non-volatile heating boilers indicates the need for maintenance at least once a year, which includes:

• Cleaning the gas filter.
• Cleaning the pilot and main burners.
• Checking the tightness of device systems; automation responsible for safety; boiler chimney draft.

All of the above work must be performed by a gas service specialist.

Product advantages

Gas boilers "Siberia" have the following advantages:

• Almost complete independence of ignition from the electrical network, since it is carried out using piezoelectric elements.
• High quality equipment.
• Ease of use.
• Long service life.
• Great looks.
• Variety of models.
• The different power of boilers makes it possible to choose the appropriate option.
• Automatic control. Thanks to this, the operation of the product is completely safe.
• Low fuel consumption.
• It is possible to purchase models with which you can additionally heat water.
• Burner resistance to high temperatures. Thanks to the stainless material that has undergone special treatment, you don’t have to worry about premature burnout of the element.
• High structural strength.
• Some models provide hot water to several points of intake at once.
• Acceptable cost: from 15,600 to 24,000 rubles.

Advantages and features of work

Thanks to the automatic welding process and the use of high-quality materials, the heat exchanger tank of the unit is highly durable and reliable. In addition, Siberia boilers have many other advantages:

1. Double-circuit designs are equipped with a flow-through copper circuit, through which the heating system is supplied with hot water.
2. The devices have an efficiency of up to 90% and simple control of the heating mode.
3. Silent operation, compact dimensions and modern design of Siberia boilers allow them to be installed in any room.
4. All units are produced with a thick layer of thermal insulation, which makes them safe to use.
5. The heat exchanger of the Siberia device, made of steel, provides more efficient heating of the coolant.
6. Cast iron heat exchangers ensure a device service life of up to twenty-five years.
7. The structures can be used both in natural water supply systems and with forced water circulation.

Siberia gas boilers are made specifically for use in Russia, therefore they are fully adapted to local conditions.

The equipment of the Siberia line also has several disadvantages:

1. To install a gas system, you must obtain permission.
2. The structure should be placed only near the wall.
3. The equipment has an increased fire hazard.
4. For the system to operate, a chimney is required.
5. There are no condensing units in the design.

The built-in automation system of Siberia boilers has a number of features:

• the automation units in the device are conveniently located, making it very easy to operate;
• the automation is equipped with piezoelectric ignition;
• Italian technology is capable of maintaining the temperature as accurately as possible;
• there is no need to specially regulate the operation of the combination valve, since everything is done automatically;
• after selecting the burner operating mode, the automation determines the optimal gas flow;
• The system is equipped with flame control and a draft sensor.

One of the important features of the operation of Siberia gas boilers is that they are energy independent

This is very important in conditions where power outages occur quite often

We can also note the operation of the heating pad that Siberia designs are equipped with. It also has its own characteristics, somewhat different from the work of competitors’ products:

1. The Italian burner with which the units are equipped is an environmentally friendly device and does not contain harmful substances in the exhaust gases.
2. The burner, made of stainless steel, will not burn out even at low pressure.
3. If you replace the main part of the burner and the pilot, the Siberia boiler will be able to operate on liquefied gas.

The burner is quite simple to operate and maintain. You don’t need any special knowledge to do this, just follow the instructions. In order for the system to work properly for a long time, it must be maintained once a year:

1. Clean gas filters.
2. Check chimney drafts, tightness of systems, operation of safety devices.
3. Clean the main and pilot burners.

It is best to entrust these works to gas service specialists.

Device Features

So, Siberia gas boilers have the following operational features:

• The size of the flame is adjusted automatically, and this is done very smoothly.
• The device has a very high level of efficiency - up to 90%.
• The device is capable of heating rooms whose area ranges from 100 to 500 square meters. m.
• The heat exchanger can be open or closed, it all depends on the model of the device.
• The temperature of water and heating is regulated separately, which allows you to use the Siberia gas heating boiler as a boiler in the summer. The heating system remains switched off.
• Availability of additional functions: anti-blocking of the circulation pump, resistance to contamination and freezing.

Price range

The cost of Siberia floor-standing models depends on the power and set of functions of this unit.

The general range is between 20-65 thousand rubles. At the same time, the delivery set includes only the boiler, gasket, instructions and packaging. The chimney and other additional accessories (if needed) will have to be purchased separately .

IMPORTANT! It is not recommended to save on concluding a warranty agreement. It’s not that expensive, but it will allow you to quickly and freely solve a lot of problems.

Specifications

The Siberia gas boiler (reviews about it are mostly positive) has the following technical parameters:

1. Warranty duration: 25 years.
2. Power: 11-35 kW, although devices rated at 50 kW are used to heat industrial premises.
3. The total weight of the product is 52-90 kg.
4. Efficiency - no less than 90%.
5. Possibility of converting the device for liquefied gas.

If you want to buy a Siberia gas boiler, reviews will help you find out more about it than the manufacturer says. For example, buyers note the high efficiency of the equipment. The unit is able to quickly heat water, even if there are several points of intake in the house. The device copes well with the task, even if it is installed in a house with several floors. An undoubted advantage is piezo ignition, so you can start the boiler even in the absence of light.

Types of devices

The Siberia gas boiler, the characteristics of which we have already reviewed, is manufactured in different modifications. For example, all manufacturer’s products can be divided into 3 types:

1. Floor-standing single-circuit. Their feature is a cast iron heat exchanger, which is characterized by increased power. This device is most often used for large houses or buildings consisting of several floors.
2. Floor-standing dual-circuit devices. They are equipped with a heat exchanger made of high-quality and durable steel. Such devices are intended not only for heating the room, but also for producing hot water.
3. Wall-mounted. These devices are lightweight, compact in size and have high performance.

Line of models

The Siberia floor-standing gas boiler is most often used for heating large buildings. However, you should consider all product lines of the presented manufacturer:

• AKGV and AOGV. These devices are installed on the floor. Their power ranges from 11 to 35 kW. The heat exchangers in them are often made of carbon steel. AKGV models are double-circuit, and AOGV are single-circuit. The presented equipment is capable of heating rooms with an area of ​​125-400 square meters. m. At a heating temperature of 35 degrees, you can consume 3.8-8 liters of hot water per minute.
• KCHGO. The line of these devices is distinguished by high power: 16, 25, 40 and 50 kW. Such boilers are intended for heating very large houses, industrial or warehouse premises. The heat exchanger in this equipment is made of cast iron.
• Top Line. These are wall-mounted devices with a power of 24 kW. They are equipped with biometric copper heat exchangers. They are capable of serving several water intake points. Most often they are used in those houses whose area does not exceed 200 square meters. m.
• Aqua. These devices are intended, rather, for heating water. Their power ranges from 18-23 kW. The speakers have piezoelectric or electronic ignition.

The best and most famous models: characteristics and prices

Classic floor-standing boilers Siberia

Classic, inexpensive and most popular boilers with a steel heat exchanger. They are distinguished by their compact size, heat exchanger steel thickness of 4 mm, reliability and reasonable price. Efficiency is 90%, gas consumption of the 11.6 kW model is only 1.18 m3/hour. Available in 11, 17, 23, 29 and 35 kW versions. There are also double-circuit models; they come with the prefix “K” (for example, Siberia 11K) and cost only 5-15% more than single-circuit ones.

Otherwise, after more than 12 years of operating experience, there are practically no serious service complaints; the model is considered the most successful and most reliable of domestic gas boilers. It has almost all the previously described disadvantages - sensitivity to clogging, noisy ignition

Please note that the maximum permissible operating pressure is only 1 bar, so it is not recommended to use the model in closed systems, where the operating pressure is usually 1.5-2 bar

Cost: 19,800-26,000 rubles.

KCHGO series

One of the best Siberia gas boilers for heating a private home. This is a larger and heavier model with a durable cast iron heat exchanger. Cast iron is practically not subject to corrosion, so such heat exchangers last 30 years or more, although they are much more expensive. Unlike the previous model, the permissible operating pressure is now 3 bar, which allows the boiler to be used in any domestic closed heating systems with forced circulation of coolant. Available in 16, 25, 40, 50 kW versions.

The burner and automation of the boiler are still the same - the famous Italian EuroSit and Polidoro, so the gas consumption remained at the same level - 1.7 m3/hour for the 16 kW model. Otherwise, everything is the same as with classic steel floorplates. A significant drawback is the lack of dual-circuit versions. Prices for cast iron models, although quite high, are much lower than foreign analogues and are among the lowest among domestic ones

Cost: 33,900 – 62,000 rubles.

Top Line Series

A mounted model, the body of which already contains all the necessary modules of the heating system (expansion tank, circulation pump, safety group, etc.). It is distinguished by the presence of a smoothly modulated burner, which is reflected in the maximum gas consumption - 2.65 m3/hour with a power of 24 kW. The copper heat exchanger is more resistant to corrosion than steel and more thermally conductive. But in dual-circuit models it is bithermic (double), which means almost zero results when washing it and vulnerability to scale accumulation. Therefore, it is imperative to use soft purified water as a coolant and change it as rarely as possible.

Cost: 21,500-26,000 rubles.

How to choose the right equipment?

The Siberia floor-standing gas boiler (you have already read the reviews) is very efficient and economical. However, you need to choose exactly the option that is suitable for your structure. The following parameters should be taken into account:

1. Device power. The higher it is, the larger the area it can heat. Naturally, the more power, the more fuel you will need. This parameter is always specified in the model name. For example, Siberia-11 has a power of 11.6 kW.
2. The size of the heated room. It can be found in the technical plan of the house. Calculating the power of the device is not difficult. For every 10 sq. m of area requires 1 kW of energy. However, the equipment should not be used to its limits to reduce the likelihood of wear on its parts. Therefore, it is better to increase the resulting power result by a third.
3. Climatic conditions.
4. Decorating the house. This parameter is also of great importance. For example, you can use facing material with additional insulation.
5. Availability or need for hot water supply.
6. Device type. If you want to install equipment in an apartment, it is better to give preference to wall-mounted models. For the home, the floor option will be the best.
7. Heat exchanger type. Experts advise giving preference to a cast iron product, as it is stronger and more durable.

Equipment installation rules

Siberia floor-standing gas heating boilers must be installed by a specialist licensed to carry out such work. It is better not to do this on your own. Moreover, you will still have to obtain permission to install.

So, equipment installation has the following features:

• First you need to obtain a permit from the gas service.
• The installation must be carried out by specialists who have a special license to work with heating equipment.
• Since the expansion tank and circulation pump are not included with the equipment, these parts will have to be purchased separately.
• Since you will have to install the boiler against a wall, it is necessary to provide a gap between the device and the base. This distance is at least 3 cm.
• To install the floor unit you will have to make a foundation. Most often it is made of brick. The wall-mounted version must be fixed very firmly.
• The equipment should be connected very carefully so that no gas leaks are detected. That is, all connections must be carefully insulated.
• Please note that when you first start up the equipment, condensation may occur on the heat exchanger. However, this phenomenon is temporary, since after the unit warms up it disappears.

If you want to install a Siberia gas boiler, the installation and operating instructions must be followed strictly.

Rules for using the equipment

So, heating equipment will last longer if you follow the operating rules:

• You cannot turn on the unit if its burner is faulty or the chimney has not been cleaned.
• The boiler body must be grounded.
• If you want to use antifreeze instead of water as a coolant, then it must be certified. The liquid must not contain ethylene glycol.
• Do not bring the water in the system to a boil (heat more than 95 degrees).
• If the boiler is installed near a wall lined with flammable materials, it should be protected with a gasket made of steel or asbestos sheet.
• You can turn on the equipment only after the system is filled with coolant.
• It is imperative to clean the chimney, filters, check the tightness of connections, and flush the burner once a year.

Siberia floor-standing gas heating boilers are a domestic competitor to foreign devices, which can be bought cheaper and will last longer.

Currently, there are a large number of heat generators from different manufacturers on the heating equipment market, among which the leading positions are occupied by German and Italian boilers. However, domestic producers are not giving up their positions. In the article we will look at what the Siberia gas boiler is and note its main characteristics.

User manual

Operating Siberia boilers is not difficult at all . The owner’s only task is to maintain the cleanliness of the unit and the absence of soot, soot or ash inside the unit. Changing the mode is done by turning the knob to the desired position.

In order to light the boiler, you need to press the handle, pushing it all the way, while simultaneously pressing the piezo ignition button.

Hold in this position for some time (up to 1 minute) until a flame appears on the pilot burner.

Then the control knob is switched to the desired operating mode, which will cause the flame on the main burner to light up and heating of the coolant will begin.

The system is filled with water with the make-up tap open. The process lasts until water flows from the signal pipe, after which the tap is closed.

About the manufacturer

The owner of the Siberia brand is Rostovgazapparat CJSC. This is a large company that produces gas equipment. The company began its activities in 1988 in Rostov-on-Don.

You can find out the price and buy heating equipment and related products from us. Write, call and come to one of the stores in your city. Delivery throughout the Russian Federation and CIS countries.

It was the first in the USSR - in 1959 - to begin producing gas boilers AOGV-80. Currently, the plant is a model of automation and robotization of production processes. Products manufactured by Siberia have a service life of 20 years.

Design and principle of operation of the Siberia gas boiler

The design of the Siberia gas boiler includes:

• the heat exchanger is made of carbon structural steel;
• automatic Sit unit is constructed of a magnetic valve, a modulating thermostat for on/off, a thermoelectric device that is responsible for controlling the flame;
• there is a re-ignition and fuel pressure stabilizer, piezo ignition and a gas filter;
• atmospheric burner, which is made of heat-resistant steel. Can function in low pressure conditions;
• body with powder protective coating;
• foil heat insulator designed to reduce heat transfer and increase productivity;
• capillary thermometer.

The unit is activated using piezo ignition. The spark ignites the burner while it is still functioning. The main burner, the atmospheric burner, is ignited by the igniter. The radiator begins to heat up, and with it the coolant heats up.

The thermostat determines the temperature, and when the water temperature reaches the set value, the automation will automatically turn off the flame. When, in the process of lowering the temperature, it reaches a critical point, the temperature sensor sends a signal to the valve - the fuel supply begins again and the fire is ignited. And the procedure is repeated.

Device

The design of Siberia floor-standing boilers consists of:

• Primary heat exchanger.
• Secondary heat exchanger (for dual-circuit units).
• Three way valve.
• Gas equipment (valve, stabilizer, filter, etc.).
• Piezo ignition unit.
• Gas burner (pilot and main).
• Gas pressure stabilizer.
• Control devices - thermometer and pressure gauge.

The main functions are performed by the burner and the heat exchanger, where the coolant is heated.

Then it is either immediately discharged to a three-way tap (single-circuit models), or it first passes through a secondary heat exchanger and heats the hot water.

After this, the liquid in the mixing unit receives the set temperature and is discharged into the heating circuit.

The movement of flows is carried out by gravity, under the influence of thermal movement of layers of liquid.

Smoke and combustion products are removed using the same method..

Advantages

Siberia boiler logo

According to the manufacturer, the Siberia gas floor-standing boiler is a new generation heating device that is used not only to heat a house, but also to supply it with hot water. If we compare these devices with foreign-made analogues, we can note the following advantages:

• a wide range of models, each user will be able to choose the best option based on the required functionality and funds;
• fully automated control system that ensures simple and safe operation;
• the units are highly economical;
• ensures uninterrupted operation of the device even in harsh operating conditions;
• availability of service support;
• acceptable price.

Advantages and disadvantages

The advantages of Siberia floor-standing boilers are:

• Simplicity of design, reliability and reliability.
• Lack of expensive electronics.
• Complete energy independence of the units.
• Compact, small size and weight.
• Low gas consumption.
• The prices of Siberia boilers are approximately half that of their European counterparts.

Flaws:

• The complexity of ignition, requiring a certain sequence of actions.
• For maximum efficiency, an external circulation pump is often needed.
• Natural draft is unstable and highly susceptible to external influences - drafts, gusts of wind, weather changes negatively affect the smoke removal system.
• The need to obtain permission from gas workers for installation.

Series of gas boilers Siberia

The manufacturer of gas boilers for heating private houses, Siberia, offers three series of these devices:

1. Premium Topline-24. These models are designed for heating small rooms. They have two circuits, so in addition to heating they perform the function of heating water for domestic needs. A distinctive feature of this series is electronic ignition. There is ionization control of fire and exhaust gases. There is also an anti-scale function. Boiler performance is high, efficiency reaches 90%.
2. Comfort Siberia. Models - 23, 29 35, 40, 50 (these values ​​​​indicate the power of the device). Boilers of this series are available with both one and two circuits. Designed for heating large areas.
3. Economy Siberia. These units began to be produced in 2005. There are four main modifications, differentiated by the number of circuits and power - 11; 6 and 17.6 kW. “K” in the marking indicates that the boiler is double-circuit. If desired, the operation of the equipment can be switched to liquefied gas. The body of the device is covered with enamel, which protects it from mechanical damage.

Floor-standing gas boiler Siberia 17K

Rostov-on-Don, Lenochnaya, 3

+7+7

Purpose: home water heating and hot water supply. Siberia boilers are resistant to significant changes in gas pressure, are completely energy independent, and have increased efficiency. The design uses basalt fiber - a key element of thermal insulation for spacecraft.

Technical equipment:

• Heat exchanger made of carbon structural steel;
• Automation unit (SIT): magnetic valve, modulating thermostat with active instant on/off function, thermoelectric flame control device with re-ignition lock, pressure stabilizer, piezo ignition, gas filter;
• Atmospheric burner made of heat-resistant stainless steel (Polidoro);
• Capillary thermometer with increased capillary volume;
• Thermal insulation foil using basalt fiber;
• Powder enamel coating of the body.

Execution options

Siberia gas boilers are available in the following modifications:

• The Siberia gas floor-standing single-circuit boiler is equipped with a cast-iron heat exchanger, which provides high power to the unit. Based on the power of the heating device, it can be used to heat private houses and buildings with several floors;
• The Siberia double-circuit floor-standing gas boiler has a steel radiator. The device is used both for heating and for supplying the premises with hot water for domestic needs;
• The Siberia wall-mounted gas boiler is characterized by its light weight, compact size and high performance.

Let's look at the distinctive features of mounted units:

• First of all, it is worth noting that such devices are very popular among users, because they are practical, small in size and have wide functionality;
• bithermal radiator, made of copper;
• the burner is made of alloy steel;
• there is an anti-freeze function;
• There is a liquid crystal display that displays all the information and error codes that appear during failures.

If you connect a room thermostat, you will reduce fuel consumption. Features of floor-standing boilers:

Available with two types of radiators: cast iron and steel. Double-circuit ones have a steel radiator and are connected to the hot water supply circuit. The Sit autocontrol unit includes:

• modulation thermostat;
• magnetic valve;
• pressure stabilizing device;
• gas filter;
• thermoelectric device with a fire control sensor and piezo ignition.

• the use of such devices is highly economical;
• have a reasonable price;
• characterized by reliability and durability;
• have a compact size;
• non-volatile, that is, their operation does not require electrical energy;
• wide range of products.

Brief overview of models

Of particular interest are Siberia gas floor-standing boilers with steel heat exchangers. This line is the best-selling and most practical, as confirmed by numerous certificates. In total, Siberia products are represented by 19 models:

• Floor and wall (11).
• Boilers with cast iron heat exchangers (4).
• Water heaters (4).

Technical equipment and design features

The heat exchanger of a gas boiler is made of high-carbon heat-resistant steel or thin-walled cast iron. A distinctive feature is the developed area of ​​this design: water is heated not only by burning fuel, but also by using the thermal energy of combustion products. Siberia heaters are equipped with a gas atmospheric burner made of high-alloy steel, which is known for its strength and heat resistance. There are varieties with open and closed fireboxes; almost all boilers have a piezoelectric ignition system (the exception is those marked with the letter “i”).

The protective automation is designed as a separate unit, including:

• Magnetic valve.
• Built-in filter for cleaning gas fuel.
• Modulating thermostat for quick on/off function.
• Re-ignition blocking.
• Stabilizer for monitoring changes in pressure in the fuel supply line.

To insulate individual elements inside the body of a gas boiler, basalt fiber gaskets are used; the outer coating is made primarily of powder enamel; some cast iron varieties have a metal shell (stainless steel). In this way, the manufacturer protects the consumer from burns and injuries. Feedback from owners about the design and control panel is more than positive; it is widely believed that in terms of aesthetics and user-friendliness of the interface, Siberia is in no way inferior to its foreign counterparts.

The advantage of some models is the built-in function of replacing natural gas with liquefied gas; it protects the owner of a heated room in case of emergency breaks or allows you to install the boiler in places without a constant gas supply. Siberia is used not only as the main source of heat, but also for hot water supply. In case of such a need, you should buy devices marked “K”, indicating the presence of a second circuit. In DHW mode, the boiler provides from 3.8 to 12 liters per minute when heated to 25 °C and about 9 when the water temperature rises to 40.

Installation rules

In order to create an autonomous heating system and install equipment, you must have a project and permits that are prescribed by the gas company. According to the manufacturer's requirements, the installation of Siberia floor-standing boilers must be carried out in accordance with SNiP standards and the requirements of GOST and SanPin, only by certified specialists who have permission to conduct such activities.

After you buy the equipment and have the permit in hand, you need to take care of additional devices. You need to purchase an expansion tank, a circulation pump, which is responsible for the forced movement of the coolant along the heating circuit. This equipment must be purchased separately, because It is not included in the boiler package.

The next stage is preparing the boiler room. Floor-standing boilers can be installed in a kitchen or in a specially designated non-residential premises that has a supply and exhaust ventilation system and a waste gas removal system. Utilities must be installed in the firebox.

Next, we pay attention to the location of the boiler unit - you need to choose an area near fireproof walls. Be sure to place the floor heating device on the foundation.

You can connect the pipeline and heating circuit yourself, without the help of specialists. Gas industry employees must connect the installation to the gas main.

Popular models of Siberia boilers

Let's consider the main models of domestic gas heaters Siberia.

Gas boiler Siberia 17K

Gas boiler Siberia 17K

The unit is designed for floor installation. The design is very simple with minimal functionality. It is in wide demand among users due to its technical characteristics and low price. This boiler is a double-circuit boiler. Power is 17 kW. The device is capable of effectively heating a room up to 200 m². Productivity is high, efficiency reaches 90%.

The combustion chamber is open. Fuel consumption is 1.21 kg/hour and 1.76 m³/hour of liquefied and natural gas, respectively. Control is mechanical. Protection - gas control. Weight is 59 kg, width is 28 cm, height is 85 cm, depth is 56 cm.

These parameters are standards for Siberia brand boilers. Also a popular model is the Siberia 23K gas boiler. Its technical characteristics are similar to the described unit, only the power is higher - 23 kW.

Siberia KCHGO-25

This is a single-circuit floor-standing convection boiler that can heat an area of ​​up to 270 m². The heat exchanger is made of cast iron, the power of the device is 25 kW. Natural gas consumption is 2.45 m³/hour. The control is mechanical, the weight of the device is 115 kg.

AOGV-17.4

Gas boiler AOGV 17.4-3 Universal

The unit is floor-standing. It does not respond to pressure changes in gas pipes and is dependent on electrical energy. There is a heat insulator with basalt fiber, the control is automatic, the radiator is made of steel.

The device can cope with heating a house with an area of ​​180 m². The equipment includes a magnetic valve that tolerates dirt well, as well as piezo ignition.

TopLine 24

Gas boiler Siberia TopLine 24 C

The unit is wall-mounted with a copper heat exchanger. Productivity 12 l/min at 25 °C - as the temperature increases, productivity decreases.

Based on the power of a particular device belonging to this model range, the device will be able to heat a room from 30 to 200 m².

general description

Natural gas is used as fuel for AOGV Siberia boilers. The abbreviation AOGV stands for gas-fired water heating unit. These heating complexes are provided with a reliable, durable design, are characterized by low fuel consumption and high efficiency.

AOGV models are made of durable steel, but the weight of the structure is light. All types of gas boilers are energy independent and can operate in difficult conditions. AOGV Siberia tanks are made of steel using automatic welding, which ensures trouble-free heating of the coolant.