| Place | Name | Characteristics in the rating |
| The best manufacturers of aluminum and bimetallic heating radiators |
| 1 | Global | The most famous brand of heating radiators |
| 2 | Rifar | The best Russian manufacturer |
| 3 | Royal Thermo | The best price in the segment of aluminum and bimetallic heating radiators |
| 4 | Sira | High quality and productivity |
| 5 | "Thermal" | Optimal price/performance ratio in a range of products |
| The best manufacturers of metal heating radiators |
| 1 | Buderus | The oldest manufacturer of metal heating radiators |
| 2 | Kermi | Wide range of products. High nominal quality |
| 3 | Purmo | Manufacturer of radiators ideally suited for use in domestic climatic conditions |
| The best manufacturers of cast iron heating radiators |
| 1 | Viadrus | The best manufacturer of cast iron radiators of classic and modern type |
| 2 | Könner | The cheapest products in the cast iron radiator segment |
Similar ratings:
- 10 best brands of bimetallic radiators
Heating radiators are the most important part of residential communications, as they serve to enhance heat transfer from pipes during the winter heating season. Not so long ago, the main production material for radiators was cast iron, but in modern realities, heating systems began to require lighter and more efficient elements. So, gradually, first steel batteries (protected from the harmful effects of water), and then bimetallic and aluminum batteries began to appear in everyday use.
Current market conditions have allowed more than a hundred manufacturers of heating radiators to reach the masses, but only 10-20% of them have managed to gain a foothold in the rank of leaders. The majority of consumers know first-hand the key indicators of batteries, paying attention to heat transfer rates, mounting and design parameters. Based on the experience of experts and reviews of real users, we have compiled a rating of the best manufacturers of heating radiators, worthy of trust and close attention to their products.
Thermal RAP-500 x8
- Cost: from 2300 rub.
- Max. operating pressure: 24 bar.
Another budget option is a heating radiator, which is often used in new buildings today. The main difference of the presented model is its compactness.
The manufacturer guarantees a 20-year service life of the aluminum-magnesium radiator. According to the characteristics, the presented model can easily withstand water with a high alkali content.
There is a smooth surface inside the device, which will significantly reduce the number of contaminations. It also features two-level sealing, thereby avoiding leaks.
Editor's Choice
Among bimetallic radiators, two models deserve special attention: Global STYLE PLUS 500 and Royal Thermo PianoForte 500 . The first is interesting for its increased safety margin. The second is notable for its unusual design, which makes the radiators an original part of the interior design.
Among aluminum devices, RO Global ISEO 500 for adapting the design to operating conditions in the Russian Federation.
Among steel ones, a very interesting solution was implemented in KZTO Harmony 2-500-12 - the radiator will not only warm you up, but will also be an excellent addition to the minimalist interior design.
If you want sophisticated cast iron classics, then you should pay attention to EXEMET Modern 3-745/600 . Compared to other models of this type, this is one of the most affordable.
The best bimetallic tubular radiators
This is a universal and economical solution for a modern heating system. The radiator consists of two plates, inside of which coolant passes in steel pipes. Radiators of this type have different sizes and a ribbed surface, which provides excellent convection properties and increased heat transfer. The metal has the same thermal conductivity as cast iron, but with the difference that its thickness is several times less than that of cast iron products. Thanks to this, they heat up much faster. This type of heater is designed to operate at operating pressures up to 10 atmospheres.
The most popular:
1.KZTO Elegant 1 250
Advantages:
- a variety of shapes and modern design allow you to place such batteries in any interior;
- long service life;
- used in systems with all types of pipes;
- relatively low cost and ease of installation.
Conclusion
Bimetallic radiators are more difficult to manufacture than conventional ones, and this, accordingly, affects the cost. However, it is justified by the fact that as a result the buyer receives an excellent radiator with a number of advantages:
- heats up quickly;
- increased wear resistance and resistance to corrosion reactions with any coolant composition;
- permissible pressure up to 35 atm.;
- in a heating system using bimetallic radiators, a much smaller amount of coolant will be used than when installing conventional heating devices;
- If you compare the same thermal power as that of conventional cast iron and a bimetallic battery, it turns out that a bimetallic radiator is several times simpler. Therefore, all bimetallic radiators can be installed independently without outside help;
- the metals used are sufficiently ductile, so water hammer in the heating system will not cause microcracks;
- Due to the fins, the surface of this heater is higher than that of cast iron. Consequently, its heat transfer is approximately 1.5-2.0 times higher;
- good external data;
- equipped with taps for adjustment.
Bimetallic radiators are good when low-quality coolant circulates in the network, and strong water hammer is possible. In this case, the steel frame guarantees the integrity of the radiator.
Factory for the production of heating radiators in Stalingrad
6 injection molding complexes provide casting of sections using the newest method - injection molding.
6 injection molding complexes provide casting of sections using the newest method - injection molding.
6 injection molding complexes provide casting of sections using the newest method - injection molding.
On a high-tech Italian line, the parts are equipped with a bottom, threads, gaskets, connected into a single heating device and undergo a hydraulic test.
On a high-tech Italian line, the parts are equipped with a bottom, threads, gaskets, connected into a single heating device and undergo a hydraulic test.
On a high-tech Italian line, the parts are equipped with a bottom, threads, gaskets, connected into a single heating device and undergo a hydraulic test.
On a high-tech Italian line, the parts are equipped with a bottom, threads, gaskets, connected into a single heating device and undergo a hydraulic test.
On a high-tech Italian line, the parts are equipped with a bottom, threads, gaskets, connected into a single heating device and undergo a hydraulic test.
On a high-tech Italian line, the parts are equipped with a bottom, threads, gaskets, connected into a single heating device and undergo a hydraulic test.
The high-performance tunnel-type painting line provides white painting and an even varnish coating of heating devices.
The high-performance tunnel-type painting line provides white painting and an even varnish coating of heating devices.
The high-performance tunnel-type painting line provides white painting and an even varnish coating of heating devices.
The heating device is packaged in a specialized thermal film that protects the surface of the device from damage from mechanical factors, and a branded colored box.
The heating device is packaged in a specialized thermal film that protects the surface of the device from damage from mechanical factors, and a branded colored box.
Global STYLE PLUS 500 x6
- Cost: from 5200 rubles.
- Max. operating pressure: 35 bar.
An excellent choice for central or autonomous boiler heating. The sections are sealed with silicone, which does not affect heat transfer performance at all. Moreover, this solution increases reliability, because compacted silicone will prevent leaks. In addition, two-layer block sections made of steel and aluminum are installed here.
In the presented model, the manufacturer slightly increased the diameter of the passage and also ensured low hydraulic resistance. That is, we can say with confidence that this radiator is not afraid of even large pressure surges.
Variety of heating equipment from Russian manufacturers
Equipment reliability is not an idle issue in a country where it is cold for more than six months, and the heating season lasts almost as long. For a long time, the emphasis was on cast iron batteries, then they were replaced by lighter bimetallic models of imported production. Almost simultaneously, proposals from other materials appeared, including aluminum and copper.
With the advent of thermal equipment with similar products on the market, Russian manufacturers had to expand the range of products, mastering the production of bimetallic and aluminum or “semi-bimetal” radiators, such as Thermo rus 500 80 (12 sections). All models are classified by type of material:
- steel (base) and aluminum (outer shell);
- copper and aluminum.
Radiators are made from different types of metal
The domestic production of modern heating equipment is developing; in catalogs and specialized stores you can see all types of heating equipment:
- floor;
- wall;
- intra-field.
According to the type of construction, solid (tubular) ones are produced in Russia, such as Monolit 350 100, and sectional models that can be extended in length. The most popular are STOUT Space 350 with 12 sections.
No less popular are the sectional models RBS 500 (bimetallic radiator BM from JSC SANTEKHPROM) and their domestic competitors - GLOBAL batteries. Products made from a steel or copper tube in an aluminum casing are distinguished by excellent thermal output; they are more aesthetically pleasing and practical than their obsolete cast iron counterparts, which had no alternative half a century ago.
However, design options that imitate ancient cast iron “accordions” are also produced by Russian enterprises. Most often these are floor-standing retro radiators with legs from Global, which are in no way inferior to imported models - the soldered design is impressive. They can be repainted, unlike some foreign-made cast iron batteries.
It is also pleasant to note that in the catalogs you can find well-equipped:
- vertical and horizontal models;
- in-floor convectors and built-in units;
- heated towel rails and design radiators, made in a single key.
Bimetal radiators are connected in different ways
It is also easy to find more expensive models on sale, such as Ventil 200 and Base 500 - 100, with different types of connection to the system. Available with side, diagonal and bottom (saddle) connection to central (and autonomous) heating pipes.
What domestic brands offer bimetal
Modernization of old heating systems is driven by necessity, and when creating new communications, the cost of components is of great importance. The latest climate systems offer savings in different ways:
- maximum insulation of houses and apartments;
- connection of Russian-made heating radiators from a budget and economical niche;
- inclusion of environmental technologies;
- heating system equipment with climate control, “smart home” and “warm floor” circuits, controlled from a smartphone or presence sensor.
In houses with an old layout, not all modern methods are applicable, but each owner can replace old cast iron “accordions”, which have minimal efficiency due to clogging, with new bimetal heating sections.
Over the past 2-3 years, the following Russian brands have firmly established themselves in the domestic heating equipment market:
- PRADO (Prado);
- Teplopribor;
- Royal Thermo;
- RIFAR (Rifar);
- KZTO;
- Itermic (Itermik);
- Halsen;
- Thermal;
- Logatrend Buderus et al.
Bimetallic radiators are produced by many Russian enterprises
Russian batteries, such as Royal Thermo revolution bimetall 350 (based on a steel tube), are in no way inferior in quality and reliability to Italian and German equipment. These products do not require expensive customs clearance and payment of complex taxes, so their price is affordable for every buyer.
Only one domestic enterprise, Royal Thermo, produces up to 12 million sections per year, and there is a growth trend. Russian manufacturers also offer reliable pipes and fittings for them - not only made of steel, but also polymer. Experts believe that over time our enterprises will meet all the needs of consumers from the Russian Federation and neighboring countries.
Royal Thermo PianoForte 500 x4
- Cost: from 3000 rub.
- Max. operating pressure: 30 bar.
Here is a representative of an Italian manufacturer, which has only 4 sections, which is perfect for a small apartment. It is distinguished by its compact size, which makes it easy to integrate into almost any recess in the wall.
Externally, the radiator looks like piano keys, which is where the name of the model came from. Heat transfer is increased due to alternating angles of inclination of sections.
We hope that the presented rating of heating radiators for 2021 will greatly simplify your choice of heating system for your apartment.
