Powerful and versatile solid fuel boilers Bear: model range

An independent heating system is sometimes necessary in areas cut off from civilization. In the context of a constant increase in energy prices, the choice in favor of autonomous heating devices is increasingly being made by owners of country houses.

Solid fuel units are gaining popularity. This forces manufacturers to design new, highly efficient models. One of the Russian manufacturing companies also mastered the production of in-demand products and introduced Medved solid fuel boilers to the market.

Review of model range and prices

The range of solid fuel heaters "Bear" is presented in two versions: wood-burning and universal. Each has several varieties, within which there is a gradation of models depending on power.

The design of the universal version, unlike the wood-burning one, is equipped with an air blower and a grate, which serves to supply oxygen to the fuel and remove ash. The fan creates forced draft, preventing the fireplace from going out.

Wood boilers

Wood fueled devices are represented by the “KBp” and “COMFORT” series. They are capable of heating rooms ranging from 40 to 450 square meters. Allows you to add fuel once a day.

From a wide range of models you can choose a heating device for both a small country house and a large cottage. Products of the “COMFORT” version are distinguished by a longer burning time and convenient dimensions.

For the firebox use:

• firewood;
• large chips;
• wood chips;
• sawdust briquettes;
• other wood waste.

Comparative characteristics and costs of products of the “KBp” and “COMFORT” series are given in the table.

Universal boilers

The version of the product with the prefix “G” in the name runs on wood fuel, peat briquettes and coal. The period of operation on one tab is up to 5 days. “COMFORT-G” products differ from “KBp-G” in a wider range of models in terms of power and standard sizes.

The main indicators and prices for universal models can be viewed in the table.

In addition to household solid fuel boilers, the Medved concern produces industrial models of heating systems. With their help, you can equip an autonomous boiler room in hospitals, kindergartens and other buildings.

The industrial version Bear COMFORT has a power from 100 to 1000 kW. Capable of heating buildings ranging from 600 to 10,000 square meters. m. The cost of products is from 222,900 to 1,132,600 rubles.

Long-burning solid fuel boiler Medved KVR 20

Long-burning solid fuel boiler Bear KVR 20 - the boiler body is made of a metal two-layer casing in the form of a cylinder. The cavity between the cylinders is filled with insulation to eliminate heat loss. The operation of the water heating boiler is controlled using a pressure gauge and temperature sensor located on the front side of the housing. There are also regulators here that can be used to change the performance of the equipment. The maximum water temperature at the heat exchanger outlet is 95C, the highest pressure in a closed heating system is 0.6 MPa. The top-burning Medved KVR 20 boiler is a solid fuel unit in which only the top layer of fuel burns. Its design is equipped with a combustion chamber with top ignition. An ideal option for heating dachas, cottages, country houses, and other premises that are located away from the main gas pipeline, a heated area of ​​100 -220 m², equipped with a heating system, both natural and forced circulation. In addition, this heating method is attractive due to its efficiency. It allows you to save on paying for expensive electricity and feel independent from gas and electricity supplies. Solid fuel boilers are reliable and safe. Their use virtually eliminates the risk of spontaneous combustion. And most importantly, they are durable and easy to maintain. An innovative method of air supply, protected by a patent, ensures uniform combustion of fuel throughout the entire volume of the chamber. Pyrolysis gases are burned in the boiler. As a result, the boiler efficiency is higher - 91%. Types of fuel for the boiler are firewood (burning duration up to 25 hours), briquettes (burning duration 3 days). The duration of combustion of one bookmark depends on the quality of the fuel, external and internal temperatures, the thermal resistance of the building, the power of the boiler, and the quality of compliance with the recommendations of the installation instructions. Guarantee of safe operation of the boiler for 15 years. The warranty period for service is 2 years from the date of first start-up of the unit. All supplied equipment is certified.

Peculiarities:

Patented technology.

L-shaped air distributor made of heat-resistant stainless steel.

Holes in the telescopic pipe for afterburning gases in the combustion chamber (gas generation effect (pyrolysis)

Due to the internal frame, the boiler can withstand a maximum coolant pressure of 3 Bar.

There is a metal bottom, the boiler can be easily dismantled and installed in another place.

There are height-adjustable supports (each support is adjustable separately from each other).

At the bottom of the boiler there is an additional space for condensate, which is easily removed through the tap.

Demountable grate without additional connections.

Large loading window into the combustion chamber.

The upper part of the boiler is completely removable, which provides easy access for seasonal cleaning, without disconnecting from the heating system.

How to heat properly

The combustion process consists of two procedures: ignition and rebooting of the boiler.

Kindling procedure:

1. Raise the air supply tube by pulling the cable. There is a hook on the bottom of the body for fixing. You need to secure the cable to it.
2. Open the chimney damper.
3. Set the thermostat to 95°C.
4. Open the loading chamber door.
5. Load fuel into the chamber up to the distributor.
6. Light a fire on top of the fuel.
7. Close the loading window, leaving a gap of a few centimeters.
8. When the fire flares up, close the loading chamber.
9. Remove the cable from the hook and leave it in a free position.
10. The air distributor should release and fall onto the burning fuel.

While operating, the device will consume fuel material. As it burns out, the cable handle will rise. When the reserve is developed, the water temperature will drop. You will need to make a replenishment.

Reloading is done like this:

1. Move the draft control to the maximum position.
2. Prepare a container for coals and ash, a scoop and a poker.
3. Open the loading chamber door, then the ash chamber window.
4. Remove the coals and ash into a container, avoiding spillage.
5. Load the firebox with a new portion of fuel material.
6. Melt using some of the coals from the previous bookmark.

Important points:

1. Firewood and briquettes are stacked horizontally and as closely as possible to each other: long logs are placed in the middle, short ones - along the edges.
2. When the chamber is not fully loaded, the combustion time is reduced.
3. You should not load the fireplace or leave unburned residues in it if you do not plan to ignite, there is a risk of the coals from the previous combustion cycle catching fire.

If necessary, the boiler can be stopped.

To carry out the operation you will need:

1. Set the thermostat to 35°C.
2. Raise the distributor by pulling the cable.
3. Make sure that combustion and smoldering have ended by periodically opening the combustion chamber door and looking inside.
4. If necessary, close the chimney damper.
5. Do not leave for half an hour and monitor the condition of the boiler.
6. If the fire reoccurs, do everything again.

During operation, it is allowed to perform: ignition, temperature adjustment, extinguishing and cleaning the boiler. Other maintenance and repair operations should only be carried out by specialists.

Installation features

Single-circuit boilers less than 60 Watt are unpretentious in installation. You can place them in the kitchen or bathroom, since the “Bear” series does not exceed the size of a standard washing machine.

Important: leave the space on the sides and front of the device free, outlining an illusory “square” 1 meter from the boiler on each side. And it is advisable to take care of protecting the walls from thermal effects so that your wallpaper does not catch fire if the boiler radiator gets very hot.

Other types of boilers Bear - gas

Gas heating appliances “Bear” are produced by ProTherm (Slovakia). These are cast iron boilers with a power of up to 49 kW, designed for heating residential and industrial premises, as well as for preparing hot water.

Peculiarities

Gas floor-standing boilers Proterm Bear have common features, but the technical characteristics of some models are different.

Peculiarities:

1. Electric ignition is convenient and safe.
2. Protection against overheating, freezing, gas control.
3. Smooth power control: 4 or 5 levels.
4. Heat-resistant heat exchanger made of cast iron.
5. Durable stainless steel burner.
6. Efficiency ranges from 89% to 92%.
7. Good price/quality ratio.
8. Possibility of connecting additional functionality (boiler, room regulator and other equipment).
9. Compact sizes.

The lineup

The Protherm Bear line of floor-standing cast iron gas boilers is represented by four series, which have their own design features. The equipment of each series is divided into several modifications depending on power indicators.

This video provides a more detailed overview of the KLOM Bear model.

KLOM

A series of units with a power from 17 to 44.5 kW are suitable for heating systems with artificial circulation. It is possible to prepare water in an external boiler. It has convenient electronic control with an LCD display that displays information about temperature and pressure. Equipped with draft and flame control, electric ignition.

This floor-standing gas equipment is considered a leader in its class. It is distinguished by: original design, high performance and excellent technical parameters.

Representatives of the model range:

• Proterm Bear 30 KLOM;
• double-circuit boiler Bear 40 KLOM;
• Proterm Bear 50 KLOM is the most powerful equipment for closed networks, its efficiency reaches 92%.

Product price 1191 – 1759 €.

Prices for boiler models Bear KLOM

Bear KLOM

KLZ

Boilers in four modifications with a power of 17 - 44.5 kW. The devices have a built-in boiler with a capacity of 90 liters. Hot water output is up to 19 liters per minute. Models are equipped with a display with convenient controls, equipped with electric ignition and a built-in expansion tank.

The Proterm Medved 40 KLZ boiler is the only option that not only has a built-in hot water boiler, but also provides two-stage regulation, allowing you to maintain a comfortable temperature in the rooms. In the line of this series, the most powerful model is the Protherm Bear 50 KLZ.

A good option for rooms with forced circulation of coolant, where both heating and hot water are required. Line price: 2560 - 3061 Euro.

Prices for boiler models Bear KLZ

Bear KLZ

PLO

Heating devices in 5 modifications with power from 17 to 49.5 kW. Suitable for heating and water heating in premises for various purposes. They have piezo ignition and a built-in thermal fuse. It is possible to operate the devices in systems with forced circulation under difficult hydraulic conditions. The cost of the model is from 1070 to 1729 €.

Prices for boiler models Bear PLO

Bear PLO

TLO

A series of four models with power parameters from 18 to 44.5 kW. The devices do not require connection to the mains; due to piezo ignition, powered by a simple battery, they are non-volatile. It is possible to connect a boiler to heat water.

It is convenient to control the operation of the device using the temperature and pressure data displayed on the display. The device is suitable for systems with natural circulation. The cost ranges from 1271 to 1854 Euros. Find out about long-burning stoves by following the link.

Distinctive features

We have already mentioned most of these features in passing in the previous paragraphs, but, in addition to them, it is also worth saying that:

1. The company's boilers are an extremely good solution in terms of price and quality ratio. Of course, they are not cheaper than Chinese crafts, but in comparison with the nearest branded goods, they have simply record figures. At the same time, you get a decent device with a guarantee of up to 5 years, during which it will already have time to recoup the money spent. And thanks to the reliable materials in the boiler, it will last for several decades if scheduled inspections are carried out in a timely manner.
2. The previously mentioned turbo attachment, which can be additionally connected to the boiler, will allow for the forced removal of combustion products, even through ventilation, which is not suitable for this according to GOST.

And now you have decided to buy a boiler, all that remains is to think about how to install it in an apartment or private house.