Stove-fireplace with a water circuit: TOP 10 best models for a summer residence, overview of characteristics, advantages and disadvantages of devices

An ordinary fireplace heats a room well, but is not able to heat the entire house for a long time due to its low heat capacity.

For this purpose, a fireplace stove with a water circuit is suitable, to which you can connect radiators in all rooms of the home.

Thus, heating of a large number of rooms is carried out from one place.

The coolant heated inside the water circuit will evenly distribute the heat and help maintain a comfortable air temperature in the house.

Place	Name	Price
TOP 5 best fireplace stoves with a water heating circuit
1	META Angara Aqua	Find out the price
2	La Nordica Termo Isotta	Find out the price
3	EdilKamin Aqua	Find out the price
4	Vesuvius PK-01(270) BEIGE	Find out the price
5	Vesuvius PK-01(270) RED	Find out the price
TOP 5 best long-burning fireplace stoves with a water circuit
1	MBS Thermo Vesta plus	Find out the price
2	MBS VULKAN	Find out the price
3	Romotop GRANADA	Find out the price
4	META Pechora Aqua	Find out the price
5	EdilKamin Warm CS	Find out the price

Device Features

A fireplace stove with a built-in water circuit is a steel chamber with varying wall thicknesses . In a closed system the indicator will be 6 millimeters, in an open system - 4 millimeters.

Heat exchanger tubes are mounted between the walls to circulate the coolant liquid. To be able to control the temperature in the oven, temperature sensors are installed.

The air flow into the combustion chamber is usually adjusted manually.

NOTE!

Exterior design can be made using various materials in order to fully comply with the overall style of the interior.

In summer, such equipment can only be used for water heating.

First fire of the stove

During the first fire, it is important not to allow high flame intensity, which can lead to damage to the fireclay lining and cracking of the varnish on the outer surface of the device. To do this, place a maximum of two logs with a total weight of 1.5-2 kg in the oven chamber. The duration of the fire should be no more than 1-1.5 hours

Over time, gradually increase the amount of firewood to 3 kg. A full bookmark will burn for 6-7 hours.

Diagram of air flow in the Angara 12 furnace

Clean glass on the Angara furnace 2012

During the first kindling, smoke may form due to the moisture contained in the fireclay tiles. Therefore, use the unit only in a well-ventilated area. There may also be some slight cracking when the case heats up. This is normal as the outer lining expands slightly. This does not in any way affect the operational properties of the unit and does not destroy the housing.

How to choose and what to pay attention to?

What qualities must a heating equipment have to become a reliable source of heat?:

Power . Varies with the size of the firebox and the dimensions of the stove. On average, a room of 10 m² requires 1 kW of power.
Dimensions . Must fit into the installation room.
Coolant volume . It consists of the volume of pipes and radiators, depending on the total length of the system and the number of batteries. Another 10% is added to the resulting value.
Chimney cross section . The indicator is important for selecting suitable structural elements.
Additional options . Cooking and heating food, easy glass cleaning, non-heating handles and other easy-to-use little things.

Specifications

European manufacturers of fireboxes with a water circuit manufacture them according to the German DIN+ standard. In Russia, it is necessary to take into account not only these standards, which determine the technical characteristics of stoves, but also heating standards. It is better to understand the features of fireplace production and their capabilities using the example of Spartherm Varia 1V H2OXL. The dimensions of the stove are exactly the same as they would be if it did not have a heat exchanger: width - 75 cm, height - 123 cm, depth - 55 cm.

To calculate the compliance of the technical characteristics of the stove with heating needs, a house with a total area of 160 square meters was selected as an example. meters. According to Russian heating standards, at a temperature outside the window of -27 degrees Celsius, spend 1 square meter on heating. meters you need no more than 50 W every hour. The rated power of this firebox is 14 kW, of which 10 kW is provided by the heat exchanger, 4 kW by thermal radiation. There are two glasses in the firebox door: the inner one has a film that reflects heat, so as not to overheat the building and not burn the skin when touched; the outer one is decorative.

The calculation period is 5 days, during which the stove will heat the house all day. In 12 hours, the fireplace produces 14 kW hourly, of which 8 kW is spent on the heating needs of the house (radiators, etc.). 1 kW is spent on heating water for domestic use. The boiler accumulates the remaining 5 kW every hour. On average, throughout the day it can accumulate about 60 kW, which will be used to heat the house at night. To accumulate such an amount of heat, the storage boiler must have a volume of at least 700 liters.

How it works - video guide

The best fireplace stoves with a water heating circuit

META Angara Aqua

The total power of the model is 16 kW, of which 7 kW is the power of the water circuit . The heat exchanger holds 10 liters of liquid and is made of 5 mm steel. The firebox has a significant volume and is easy to clean from combustion products.

Firewood can burn in a prolonged mode, which is especially convenient at night.

The body is decorated with ceramic inserts, and the glass door provides excellent visibility..

Design solutions made it possible to reduce the volume of soot entering the chimney.

Characteristics:

power: 16 kW;
location: corner/wall;
chimney: 150mm, front/rear;
material: steel;
heated area - up to 160m2;
glass type: prismatic;
dimensions: 104*70*54.5cm;
weight: 205kg.

Advantages:

attractive external design;
presence of panoramic glass.

Flaws:

high fuel consumption;
insufficient heat transfer to the coolant;
soot on the glass.

La Nordica Termo Isotta

The Isotta cast iron stove is equipped with a water circuit and is designed to heat several living spaces at the same time.

Its double walls allow you to effectively manage air flow. A hob is built into the surface. It has a protective cover that protects the walls from contamination during the cooking process.

The firebox door is decorated with panoramic ceramic self-cleaning glass . There is a separate door at the bottom for easy use of the ash drawer.

Characteristics:

power: 15-19 kW;
Efficiency: 78.4%;
location: wall;
chimney: 150mm, front/rear;
material: cast iron;
glass type: panoramic;
dimensions: 77.5*76*52cm;
weight: 212kg.

Advantages:

long burning;
convenient door;
self-cleaning glass;
moderate fuel consumption.

Flaws:

EdilKamin Aqua

The combustion chamber of this furnace has double walls . This allows you to reduce the temperature impact on the body and extend the service life of the fireplace stove.

The inside of the firebox is lined with fireclay, resistant to combustion products and high flame temperatures.

The door is decorated with glass, which can withstand heat up to 750 degrees, but is not resistant to pinpoint impacts . The water circuit will allow you to create a full-fledged heating system in the house, heating the neighboring rooms.

For safety, there is a built-in sensor against system overheating . The oven can be used in the kitchen; the cooking surface has a heating temperature of up to 200 degrees.

Characteristics:

power: 6.5 kW;
hob;
location: wall;
chimney: 150mm, ;
material: steel, ceramic tiles, fireclay;
glass type: straight;
dimensions: 95*52*52cm;
weight:186kg.

Advantages:

high quality materials;
excellent assembly;
overheat protection.

Flaws:

Vesuvius PK-01(270) BEIGE

The stove is made of a combination of cast iron and steel . The door is cast iron with heat-resistant glass. The grate is cast iron. The firebox is finished with fireclay.

The ends are decorated with beige ceramic inserts, which help the stove retain heat longer. It is possible to heat rooms with a total area of up to 200 m2.

Burning time on one stack of wood is up to 5 hours.

High-quality components guarantee a service life of at least 10 years. The furnace firebox is 100% airtight.

The parts are fixed using a bolted connection to guarantee reliability . In the economical operating mode, the firewood only smolders; in the intensive mode, quick kindling is carried out.

Characteristics:

power: 9 kW;
hob - no;
location: wall;
heating area - up to 200m2;
chimney: 150mm, ;
material: steel, cast iron, ceramic tiles, fireclay;
glass type: straight;
dimensions: 82*46*43cm;
weight:141kg.

Advantages:

design;
ergonomics;
holds temperature for a long time.

Flaws:

Vesuvius PK-01(270) RED

The fireplace stove is made from high quality induction steel . The firebox door is made of cast iron and equipped with a glass insert; the ash door allows you to control the intensity of combustion.

The firebox is finished with high-quality fireclay, which can be easily replaced if necessary. Decorative inserts on the sides are ceramic, red.

The power is 9 kW, which will allow you to warm up a room with a volume of up to 150 m3.

One stack of firewood will provide heat for up to 5 hours. You can connect an electric fan to quickly heat the room. The minimum service life of the product is 10 years.

Characteristics:

power: 9 kW;
hob - no;
location: wall;
heating area - up to 200m2;
chimney: 150mm, ;
material: steel, cast iron, ceramic tiles, fireclay;
glass type: straight;
dimensions: 82*46*43cm;
weight:141kg.

Advantages:

heating rate;
nice design in a classic style;
high legs.

Flaws:

soot on glass.

Kinds

First, decide what kind of fireplace you want to install. Fireplaces for country houses come in different types and each of them has its own characteristics:

wood stoves - fireplaces. Such fireplaces are made of brick, cast iron and steel and have a heat exchanger function. Such fireplaces have open, semi-open and closed fireboxes. These fireplaces run on solid fuel – wood or coal. Firewood is considered the most affordable type of fuel. The tree also has an excellent ability to absorb carbon dioxide;
Gas country fireplaces are also very popular; they work on the principle of a kitchen stove, but have a beautiful design. They are used not only to heat the house, but also simply as interior decoration.
electric fireplaces; The main advantages of such fireplaces are their safety and ease of use. If you do not want to waste your time lighting the fireplace, then an electric fireplace will be the ideal option for you. This installation serves both as a heating device and as a decorative element in the house;
a decorative (fake) fireplace is considered one of the most affordable and budget-friendly. It is installed if they simply want to diversify the interior of the room. This fireplace is suitable for decorative purposes only. It is quite easy to install and can be decorated as you wish;
It makes sense to choose a fireplace stove with a water circuit if you need to regularly heat a large area of the room. This design heats up quickly and the heat spreads throughout all rooms.
eco-fireplaces; such fireplaces are the safest and most environmentally friendly. This type of fireplace runs on liquid fuel – bioethanol. When burned, this substance does not emit substances hazardous to health. The disadvantages of such models include the high price and high consumption of liquid fuel;
mini fireplaces; This is a portable miniature fireplace. Due to their small size, they can be placed anywhere, for example on a table;
potbelly stove; a very simple, compact and affordable type of heating. Operating a potbelly stove is only slightly more complicated than using a fireplace, however, fuel economy is much better;
Garden barbecue stoves, grills, barbecues are indispensable assistants for frying kebabs and preparing other dishes in the country. Such ovens are small in size and can be carried to any place by one person;
A convection oven is used to cook meat, fish, bread and other dishes. Convection ovens are compact and easy to use;
cassette fireplace - an iron or cast iron firebox covered with glass. It is inserted into the oven or finished with various materials (for example, brick). A closed firebox does not require constant monitoring, which is certainly an advantage of this type of stove.

The best long-burning fireplace stoves with a water circuit

MBS Thermo Vesta plus

Intended for heat supply to premises equipped with water heating systems . The stove can be connected to the system in tandem with a solid fuel boiler or in independent mode.

The maximum possible water temperature inside the heat exchanger is 90°C.

The stove is made of high quality cast iron and steel. The outer enamel coating is particularly aesthetic and retains its attractive appearance for a long time.

There is a continuous cooking surface made of cast iron.

Rapid heating of the room is ensured by convection. The ash drawer can be pulled out directly during lighting, which simplifies maintenance.

Characteristics:

power: 11 kW;
Efficiency - 83%;
hob - yes;
location: wall;
heating area - up to 110m2;
chimney: 150mm, ;
material: steel, cast iron, ceramic tiles, fireclay;
glass type: straight;
dimensions: 90*46*44cm;
weight: 91.5 kg.

Advantages:

design;
build quality;
high efficiency and long-term heat retention.

Flaws:

The internal surface of the firebox may require replacement after just a couple of years of use.

MBS VULKAN

A wood-burning stove-fireplace can heat large rooms while having compact dimensions . Perfect for use in a country house outside the city.

It will help organize autonomous heating or supplement the existing one.

The firebox is voluminous, while fuel is consumed in economy mode.

With the MBS Vulcan Thermo stove, your home will not only have a unique atmosphere, but also be more comfortable. There are modes of intense heating or smoldering.

Characteristics:

power: 24 kW;
Efficiency - 83%;
hob - yes;
location: wall;
heating area - up to 140m2;
chimney: 120mm, ;
material: steel, cast iron;
glass type: straight;
dimensions: 65*78*64.5cm;
weight: 151kg.

Advantages:

ease of kindling and maintenance;
high reliability;
room heating rate;
fuel economy.

Flaws:

none.

Romotop GRANADA

The stove has a modern appearance, high quality workmanship and uses an innovative method of burning wood..

The body is made of steel covered with decorative tiles. Steel stoves heat the air faster - already 15 minutes after lighting.

The combustion chamber contains fireclay that can withstand up to 1300 degrees . The combustion chamber is separated from the body to reduce the risk of fire and extend the life of the stove itself.

Characteristics:

power: 13 kW;
location: wall;
heating area - up to 130m2;
chimney: 150mm, ;
material: steel, ceramics;
glass type: straight;
dimensions: 125*50*56cm;
weight: 254kg.

Advantages:

modern design;
wide choice of body colors;
heating efficiency.

Flaws:

high price.

META Pechora Aqua

Pechora is one of the most efficient fireplace stoves that can effectively heat a large house . The installation is connected to heating radiators.

The stove warms up in a matter of minutes, and the fireplace itself is made of non-combustible materials, the main one being stainless steel. If you need to heat a small room, this model is suitable for that.

Then it does not need to be connected to the water heating circuit; the air heating power will be sufficient . You cannot connect the stove to heating radiators if there is no water in the radiators.

Characteristics:

power: 9 kW;
location: wall;
heating area - up to 90m2;
chimney: 150mm, ;
material: steel, ceramics;
glass type: straight;
dimensions: 104*75*49cm;
weight:155kg.

Advantages:

does not take up much space;
economical consumption of firewood;
smoldering mode.

Flaws:

cools down quickly.

EdilKamin Warm CS

The stove belongs to a new generation . Depending on the area of the room, you can choose the Warm Base or Warm Scaldavivande configuration.

This stove can not only heat the home, but also provide hot water supply.

The design is in a classic rustic style, but will also fit into a modern interior. The ends, facade and base are cast iron, the hearth is made of steel, the cladding is made of ceramics.

Characteristics:

power: 14 kW;
location: wall;
heating area - up to 140m2;
chimney: 150mm, ;
material: cast iron, steel, ceramics;
glass type: straight;
dimensions: 108*56*51.5cm;
weight: 253kg.

Advantages:

efficiency;
heating and hot water;
reliable components;
perfect assembly.

Flaws:

high price.

How much are

The cost of Meta fireplaces and stoves differs from their size and operating principle. How much will a fireplace stove from the Russian manufacturer Meta cost? A cast iron installation, for example, will cost about 30-50 thousand rubles, because each fireplace stove differs in size (albeit slightly) and set of functions. Some models are laconic and lack additional features such as having a stove on top, while other models are designed for cooking and heating the room at the same time.

The Meta fireplace insert will cost from 12 thousand to 130 thousand rubles; Low-power cast-iron installations are budget-friendly; the price increases depending on its purpose, the main material (steel is more expensive), power and size.

User opinions

“It’s already been 3 years since we purchased the Meta fireplace. We mainly use the stove only in winter. We decided to buy it because of recommendations from loved ones and many positive reviews about the Yenisei brand. Everything really works as promised by the manufacturer. When it's -30 to -36°C outside, it only takes 40 minutes for the room to become very warm. We have a wall-corner model of the Yenisei fireplace with a cast iron stove, it looks very beautiful. Often the whole family sits and just admires the flames. We recommend purchasing it to all our friends and colleagues. The price was about 37,000 rubles.”

Alexandra Savushkina, Moscow.

“I thought for a long time about what brand of stove to buy, but I read a lot and heard good reviews about Meta fireplaces with and without a water circuit. But since the country house has a small area, I decided to take a version that works only by heating the air. When choosing, I immediately liked the Yenisei fireplace model with a cast iron stove. All details are made with high quality, the seams are smooth, tight, and it looks very chic with three heat-resistant glasses. When I lit the stove for the first time, the front one became dirty with soot, but as soon as I wiped it off, after that the soot no longer stuck. I carefully understood all the settings, including the glass blowing system. This is what surprised me the most, a very convenient function.”

Konstantin Malkov, St. Petersburg.

“I’ve had the Yenisei with a cast iron stove for about a year now. It’s worth baking in the garage and so far I’m happy with everything. At first I was surprised by the consumption, it seemed quite high, but my suspicions were wrong due to the fact that I had not previously used similar solid fuel heaters. I had to carefully read reviews about the stove and the manufacturer’s instructions in order to supply air correctly and in the right quantity. Otherwise, first I opened the supply all the way and all the wood burned out in 3 hours. Now the fireplace is heated for about 6 hours, and it’s always comfortable in the garage, as a result you can work calmly.”

Gregory, Ufa.

“I used to use a stove with a water circuit, but I didn’t like the fact that I had to constantly drain and refill the coolant when I was away for a long time, so that the pipes and boiler wouldn’t defrost. Therefore, I decided to purchase the Yenisei model with a cast iron stove, especially since I heard a lot of positive reviews about the Meta company. The fireplace functions perfectly. It is convenient to monitor the combustion process through the glass; as a result, it is difficult to miss the moment when it is necessary to add firewood to the stove. Little fuel is consumed. All parts are made with high quality, the seams are perfectly finished.”

Mikhail Skvortsov, Nizhny Novgorod.

“I’ve been using the Yenisei model stove with a cast iron stove for about 5 months now. During this time, there were no major problems, only condensation formed on the smoke exhaust pipe. I turned to the specialists of the Meta company and they recommended finishing it with insulation. In the end, everything became normal, it was as if there was no condensation. I had never used such a heater before, so I had to learn how to adjust the air supply using the manufacturer’s manual and reviews of the operation of fireplace stoves. I really like the beautiful appearance, it fits perfectly into the interior of my home. For me, this fireplace can be installed in rooms with any design.”

Evgeniy, Chelyabinsk.

Manufacturers

Currently, several manufacturers produce high-quality fireplace stoves. Let's get to know them better.

"EcoFireplace"

In the ranking of Russian companies producing fireplace stoves, EcoKamin occupies a leading position. This company closely cooperates with European markets.

The main advantages of the domestic manufacturer are:

a wide range of stoves and fireplaces;
fast and high-quality customer service;
high quality products.

Termofor

This is another popular Russian manufacturer that produces high-quality and durable fireplace stoves. In addition, the units of this company differ in their design. In addition to traditional and laconic options, consumers can choose models with heat-storing brickwork, which look very interesting.

The Termofor assortment includes fireplace stoves of different sizes. Buyers have the opportunity to choose both very miniature and fairly large specimens. In addition, many of the company's models are equipped with ovens and hobs.

Tulikivi

Tulikivi is a large Finnish manufacturer specializing in the production of stone stoves, corner fireplaces, heating stoves with ovens, stone stoves with ovens, ceramic stoves and fireplaces with ceramic lining. The range of this company is truly impressive, as is the quality of its products.

Tulikivi stone stoves and fireplaces deserve special mention. They are large in size and have excellent strength characteristics. In addition, such models are distinguished by durability.

ABX

This manufacturer from the Czech Republic produces high-quality fireplace stoves with heat exchangers and various cladding (or without it). Most models run on regular firewood. The assortment of this company is very rich. Consumers have a wide choice of designs in different colors. Steel, talc, ceramics, and Brazilian sandstone can be used as finishing for ABX fireplace stoves. The products are presented in green, red, brown, gray colors.