Which heating pipe layout to choose - types and features of options

Here you will learn:

  • Single pipe systems
  • Single-pipe horizontal
  • Single-pipe vertical
  • Scheme "Leningradka"
  • Two-pipe system with bottom wiring
  • Two-pipe system with top wiring
  • Beam system with collectors
  • With forced and natural circulation

One of the stages of building a private house is the design and creation of a heating system. This is a difficult stage, since you need to not only design the heating, but also save on materials. An important factor is that the heating created must be efficient and economical. We create heating for a private house with our own hands - you can find wiring diagrams (the most basic) in our review.

There are many schemes for laying heating pipes in private households. Some of them are combined, which allows you to increase the efficiency of the system and achieve more uniform heating throughout the house. In our review we will consider only the most basic schemes:

  • single-pipe horizontal circuit;
  • single-pipe vertical design;
  • "Leningradka" scheme;
  • two-pipe system with bottom wiring;
  • two-pipe system with top wiring;
  • beam system with collectors;
  • schemes with forced and natural circulation.

Let's look at the features of the presented schemes, and also discuss their advantages, disadvantages and installation features.

Single pipe systems


In single-pipe heating systems, the coolant passes sequentially through all radiators.

When creating heating for a private house with your own hands, the easiest way is to equip a single-pipe heating system. It has many advantages, such as cost-effective use of materials. Here we can save a lot on pipes and achieve heat delivery to every room. A single-pipe heating system provides for sequential delivery of coolant to each battery. That is, the coolant leaves the boiler, enters one battery, then another, then a third, and so on .

What happens in the last battery? Having reached the end of the heating system, the coolant turns around and is sent back to the boiler through a single pipe. What are the main advantages of such a scheme?

  • Easy to install - you need to sequentially pass the coolant through the batteries and return it back.
  • Minimum consumption of materials is the simplest and cheapest scheme.
  • Low location of heating pipes - they can be mounted at floor level or completely lowered under the floors (this can increase the hydraulic resistance and require the use of a circulation pump).

There are also some disadvantages that you have to put up with:

  • limited length of the horizontal section - no more than 30 meters;
  • The farther from the boiler, the colder the radiators.

However, there are some technical tricks that can mitigate these shortcomings. For example, the length of horizontal sections can be dealt with by installing a circulation pump. It will also help make the last radiators warmer. Bypass jumpers on each radiator will also help compensate for the temperature drop. Let's now discuss certain types of single-pipe systems.

Determination of boiler power

The power calculation is carried out by summing the power of all batteries and other elements powered by the boiler, followed by multiplying the resulting figure by 1.4 (heat loss coefficient through ventilation). The final result is divided by the power utilization factor and the boiler efficiency. Having the required power on hand, select the appropriate equipment. It is recommended to buy a device with slightly larger parameters in case of severe frosts. This will make it possible to feel comfortable in the harshest winters.

Single-pipe horizontal


The simplest version of a single-pipe horizontal heating system with a bottom connection.

When creating a heating system for a private house with your own hands, a single-pipe wiring diagram may turn out to be the most profitable and cheapest. It is equally suitable for both one-story and two-story houses. In the case of a one-story house, it looks very simple - the radiators are connected in series - in order to ensure consistent flow of coolant . After the last radiator, the coolant is sent through a solid return pipe to the boiler.

Advantages and disadvantages of the scheme

First, we will look at the main advantages of the scheme:

  • ease of implementation;
  • excellent option for small houses;
  • saving of materials.


A single-pipe horizontal heating circuit is an excellent option for small spaces with a minimum number of rooms.

The scheme is really very simple and understandable, so even a beginner can handle its implementation. It provides for a serial connection of all installed radiators. This is an ideal heating layout for a small private house . For example, if this is a one-room or two-room house, then “fencing” a more complex two-pipe system does not make much sense.

Looking at the photo of such a circuit, we can note that the return pipe here is solid, it does not pass through the radiators. Therefore, this scheme is more economical in terms of material consumption. If you don’t have extra money, this type of wiring will be the most optimal for you - it will save money and allow you to provide heat to your home.

As for the shortcomings, there are few of them. The main disadvantage is that the last radiator in the house will be colder than the very first one. This is due to the sequential passage of the coolant through the batteries, where it releases the accumulated heat into the atmosphere. Another disadvantage of a single-pipe horizontal circuit is that if one battery fails, the entire system will have to be turned off at once.

Despite certain disadvantages, this heating scheme continues to be used in many small private houses.

Features of installation of a single-pipe horizontal system

When creating water heating for a private house with your own hands, the scheme with single-pipe horizontal wiring will be the easiest to implement. During the installation process, it is necessary to mount the heating radiators, and then connect them with pipe sections. After connecting the very last radiator, it is necessary to turn the system in the opposite direction - it is advisable that the outlet pipe runs along the opposite wall.


A single-pipe horizontal heating circuit can also be used in two-story houses; each floor here is connected in parallel.

The larger your home, the more windows it has and the more radiators it has. Accordingly, heat losses also increase, as a result of which the last rooms become noticeably cooler. You can compensate for the temperature drop by increasing the number of sections on the latest radiators . But it is best to install a system with bypasses or with forced circulation of the coolant - we will talk about this a little later.

A similar heating scheme can be used to heat two-story houses. To do this, two chains of radiators are created (on the first and second floors), which are connected in parallel to each other. There is only one return pipe in this battery connection diagram; it starts from the last radiator on the first floor. The return pipe coming down from the second floor is also connected there.

Selection of radiators

The selection of batteries must be approached with special attention, because... this directly affects the service life of the system and the level of comfort in the home.

The most popular are 4 types of radiators:

  1. Made of cast iron.
  2. Of steel.
  3. Made of aluminum.
  4. Bimetallic.

The highest level of heat transfer and the longest service life are found in cast iron radiators. However, due to the large mass of cast iron, it is quite difficult to install these heaters. An excellent alternative are bimetallic products that demonstrate good durability and heat transfer, at a higher cost. As for aluminum and steel appliances, it is not recommended to use them: the first option quickly breaks down, and the second is unlikely to be able to provide adequate room comfort during severe cold weather.

To correctly calculate the number of radiator sections, you need to multiply the heat loss parameter by 1.2 (safety factor). The result obtained is divided by the thermal power of one section. The resulting number is rounded up. A simpler way to calculate sections is to use the ratio 1 section/2 m2. This is only true for rooms where the height of the walls does not exceed 3 m.

The most optimal place to install radiators is the area under the window. Thanks to this, it is possible to somewhat reduce heat leakage through the window opening. On the other hand, in this position of the battery, part of the thermal energy will be absorbed by the wall, which it is advisable to avoid. In such cases, the section of the wall near which the battery is mounted is equipped with a special foil screen. Thanks to the reflective properties of the foil, thermal energy is returned back into the room.

Single-pipe vertical

How else can you heat two-story households with a single-pipe system? There really is an alternative - this is a single-pipe vertical heating system, which is used by many people who are looking for a suitable steam heating scheme in a private home. There are no difficulties in such a scheme; you just need to bring the supply pipe with the coolant to the second floor and connect the batteries located there, and then make branches down to the first floor .

Advantages and disadvantages of a single-pipe vertical scheme

As usual, let's start with the positive features:


In single-pipe vertical heating systems, the coolant flows from the radiator on the top floor to the lower floors.

  • greater savings on materials;
  • relatively equal air temperature on the first and second floors;
  • ease of implementation.

The list of disadvantages is the same as the previous scheme. It included heat losses on the last radiators. And since our coolant is supplied through the upper floor, it can be cooler on the first floor than on the second .

The savings on materials are more than substantial. We only have one pipe going upstairs, from which the coolant is distributed to all the radiators on the second floor (not sequentially). From each upper radiator, pipes go down to the radiators on the ground floor, after which they end up in one common return pipe. Thus, this scheme involves minimal use of materials.

Features of installation of a single-pipe vertical system


When installing a vertical single-pipe system, you will receive as many chains as there are radiators on each floor.

In the previous gas heating scheme in a private house, the pipes sequentially bypassed the radiators on the first and second floors. That is, we got two parallel chains, each of which included several radiators . In the current scheme we also have chains, but they are vertical. For example, if there are four radiators on each floor, then we get four chains connected in parallel.

This scheme assumes one solid supply pipe passing along the top floor. Branches are made from it to each radiator. After passing through the upper radiators, the coolant flows to the lower radiators, and only after that into the return pipe passing along the first floor.

If in the first case the greatest heat losses were observed in the distant radiators of the first and second floors, then in this scheme it will be cooler on the first floor, since part of the heat will be consumed on the second floor.

A single-pipe vertical heating scheme for a private house with a gas boiler can be implemented without forced circulation of the coolant. The thing is that the temperature of the coolant supplied to the radiators on the second floor is the same. A drop in temperature is observed only on the first floor. But if we supplement the radiators with bypass jumpers, then the temperature change will be minimal - it can be neglected.

Thus, this circuit, supplemented by bypass jumpers, will become the most economical and inexpensive among any other circuits. Instead of a gas boiler, any other boiler can be used. The electric heating circuit of a private house is no different from gas heating (except in the type of boiler).

Scheme "Leningradka"


The Leningradka heating system is an improved single-pipe system.

Both considered schemes have one common drawback - a drop in temperature in the last radiators. In the case of a horizontal circuit, we have cold radiators in horizontal chains, and in the case of a vertical circuit, in vertical chains. That is, in the latter case it is the entire first floor.

The Leningradka heating circuit in a private house allows you to compensate for the cooling of the coolant when passing through the next radiator . How is it implemented? This circuit provides bypass jumpers located under the batteries. What do they give? The jumpers allow you to direct part of the coolant bypassing the radiators, so the coolant at the outlet is as warm as at the inlet (minor deviations can be neglected).

Advantages and disadvantages of the Leningradka scheme


Leningradka promotes more uniform heating of rooms.

Each scheme has its own advantages and disadvantages. What are the advantages of the Leningradka scheme?

  • More even heat distribution throughout the house.
  • Relatively simple upgrade.
  • Possibility of adjusting the temperature in individual rooms (as in two-pipe systems).

Single-pipe heating is not perfect, so the Leningradka scheme allows you to compensate for some of its shortcomings. But she has negative features:

  • limited length of the line - if there are many radiators in a horizontal chain, then there will still be losses ;
  • the need to use large diameter pipes for more uniform heat distribution.

The last drawback can be eliminated by installing a circulation pump in the system.

Features of installation of "Leningradka"


Connection options for Leningradka in a single-pipe vertical circuit.

When creating heating systems for private houses with their own hands, many people actively use the Leningradka scheme. How is it laid? To create a circuit, it is necessary to place radiators and lay a pipe under them, from which branches are made to the inlets and outlets of the radiators. That is, a jumper is formed under each radiator. In addition, we can install three taps on each radiator - the first two taps are installed at the inputs and outputs, and the third is installed on the jumper itself. What does this give?

  • Taps can be used to regulate the temperature in individual rooms.
  • The ability to exclude any radiator without shutting down the entire system (for example, if one radiator is leaking and needs to be replaced).

Thus, the “Leningradka” scheme is the optimal scheme for small one-story and two-story houses - you can save on materials and achieve uniform heat distribution throughout the rooms.

Heat loss calculation

To simplify the calculation, you can ignore the indicators of internal heat exchange between individual rooms. When making calculations, it is necessary to determine exactly how many external walls and corners there are, which are characterized by the highest level of heat loss. For an accurate calculation, multiply the wall thickness by the thermal resistance coefficient of a specific building material. Quite a lot of heat escapes through windows and doors, so they need to be well insulated.

Two-pipe system with bottom wiring

Next, we will consider two-pipe systems, characterized by the fact that they ensure uniform heat distribution even throughout the largest households with many rooms. It is the two-pipe system that is used for heating multi-storey buildings, in which there are a lot of apartments and non-residential premises - here this scheme works great . We will consider schemes for private houses.


Two-pipe heating system with bottom wiring.

A two-pipe heating system consists of supply and return pipes. Radiators are installed between them - the radiator inlet is connected to the supply pipe, and the outlet is connected to the return pipe. What does this give?

  • Uniform heat distribution throughout the rooms.
  • Possibility of adjusting the temperature in the rooms by completely or partially closing individual radiators.
  • Possibility of heating multi-storey private houses.

There are two main types of two-pipe systems - with bottom and top wiring. First, we will look at a two-pipe system with bottom wiring.

Bottom wiring is used in many private homes, as it makes heating less visible. The supply and return pipes pass here next to each other, under the radiators or even in the floors. Air is removed through special Mayevsky taps. Heating schemes in a private house made of polypropylene most often provide for just such wiring.

Advantages and disadvantages of a two-pipe system with bottom wiring


When installing heating with bottom wiring, we can hide the pipes in the floor.

Let's see what positive features two-pipe systems with bottom wiring have.

  • Possibility of masking pipes.
  • The ability to use radiators with bottom connections makes installation somewhat easier.
  • Heat losses are minimized.

The opportunity to at least partially make heating less visible attracts many people. In the case of bottom wiring, we get two parallel pipes running flush with the floor . If desired, they can be placed under the floors, having provided for this possibility at the stage of designing the heating system and developing a project for the construction of a private house.

If you use radiators with bottom connections, it becomes possible to almost completely hide all the pipes in the floors - the radiators are connected here using special units.

As for the disadvantages, they are the need for regular manual removal of air and the need to use a circulation pump.

Features of installing a two-pipe system with bottom wiring


Plastic fasteners for heating pipes of different diameters.

In order to install a heating system according to this scheme, it is necessary to lay supply and return pipes throughout the house. For these purposes, there is a special plastic fastener on sale. If radiators with a side connection are used, we make a branch from the supply pipe to the upper side hole, and take the coolant through the lower side hole, directing it to the return pipe. We install air vents next to each radiator. The boiler in this scheme is installed at the lowest point.

It uses a diagonal connection of radiators, which increases their heat transfer. Bottom connection of radiators reduces thermal output.

This circuit is most often made closed, using a sealed expansion tank . The pressure in the system is created using a circulation pump. If you need to heat a two-story private house, we lay pipes on the upper and lower floors, after which we create a parallel connection of both floors to the heating boiler.

Recommendations for laying heating pipes in a private house

A main pipeline of any complexity can be completed independently if you have the time, effort and desire. However, in order for the resulting heating network to be reliable, efficient, durable and easy to maintain, the following recommendations must be adhered to.

  • When designing a heating network, the direction of movement of the coolant is determined based on the layout of the house and its location relative to the cardinal points and wind rose. It is advisable to position the main so that those rooms where the highest air temperature is needed are heated first: children's rooms and bedrooms, as well as rooms with two or more external walls, rooms on the north and windward sides of the house. The outline is usually completed by kitchens and other non-residential premises.
  • It is advisable to equip heat exchangers connected to the main line with bypasses - short additional pipeline branches connecting the supply pipe to the return pipe, respectively, in front of the inlet and outlet openings of the battery. Such a device will allow you to turn off the heat-emitting device during its repair or replacement, without stopping the entire heating system.
  • When laying in an open way, it is recommended to connect the pipeline elements using detachable fittings for ease of repair work. If the line is laid in a hidden way, all connections to which there is no direct access must be permanent, so that in the event of depressurization the floor, wall or ceiling will not be damaged.
  • When installing a heating circuit in a hidden way into channels in walls or ceilings, the pipes must be insulated to reduce heat loss.
  • Installation of heating networks from polypropylene pipes is allowed if the heating device heats the coolant no higher than 80 degrees. At the same time, such pipes can be laid in a hidden way only under suspended structures. Screed installation is not permitted.

Two-pipe system with top wiring


In a two-pipe heating system with overhead wiring, the expansion tank is placed at the highest point.

This two-pipe scheme is very similar to the previous one, only here it is provided for the installation of an expansion tank at the very top of the system, for example, in an insulated attic or under the ceiling . From there, the coolant goes down to the radiators, gives them part of its heat, and then is sent through the return pipe to the heating boiler.

Why is such a scheme needed? It is optimal in multi-storey buildings with a large number of radiators. Thanks to this, more uniform heating is achieved, and there is no need to install a large number of air vents - the air will be removed through the expansion tank or through a separate bleeder that is part of the safety group.

Advantages and disadvantages of a two-pipe system with top wiring

There are a lot of positive features:

  • it is possible to heat multi-storey buildings;
  • saving on air vents;
  • you can create a system with natural coolant circulation.

There are also some disadvantages:


Using vertical wiring will lead to additional difficulties when installing hidden heating.

  • pipes are visible everywhere - this scheme is not suitable for interiors with expensive finishing, where elements of heating systems are usually hidden ;
  • in tall buildings it is necessary to resort to forced circulation of the coolant.

Despite the disadvantages, the scheme remains quite popular and widespread.

Features of installation of two-pipe systems with top wiring

This scheme eliminates the need to locate the heating boiler at the lowest point. Immediately after the boiler, the supply pipe is diverted upward, and an expansion tank is installed at the highest point. Coolant is supplied to the radiators from above, so a lateral or diagonal radiator connection scheme is used here. After this, the cooled coolant is sent to the return pipe.

Price for 1m2 of work

It is difficult to independently take into account all the nuances and correctly install the heating network around the house. It is much better to entrust this work to specialists who will offer the best option and a set of additional equipment. Based on experience, designers and installers are able to correctly place emphasis depending on the customer’s wishes: to provide heating with maximum efficiency and ease of use, or to strive to save money on work and installation.

The cost of the work includes separate installation of the boiler, connection of additional equipment, pipe routing and installation of radiators. Each item has its own price list, according to which the cost of all work on equipping the heating system in the house is calculated.

Type of workunitsCost, rub.
Installation of a heating boiler with a power of up to 50 kWPC.12000-20000
Installation of a boiler with a power of over 50 kWPC.25000-50000
Security group installationPC.from 1500
Expansion tankPC.from 2000
Circulation pumpPC.from 2000
Installation and connection of the comb (collector)PC.from 1500
Pipe routing D16-25linear meters60-85
Pipe routing D32-40linear meters75-90
Pipe routing D55-63linear meters90-120
Pipe routing D75-110linear meters100-150
Installation and connection of the radiatorPC.2000-5000
Installing a thermostatPC.500
Pressure testing according to the requirements of the boiler equipment manufacturerfrom 4500
Commissioning worksfrom 3500

Routing pipes from the boiler to the radiators can average 300-500 rubles per linear meter, taking into account laying, connection, passage and wall grooves. Prices are indicative for Moscow and the region.

Beam system with collectors


Radiant heating system using a collector.

This is one of the most modern schemes, which involves laying an individual line to each heating device . To do this, collectors are installed in the system - one collector is the supply, and the other is the return. Separate straight pipes diverge from the collectors to the batteries. This scheme allows for flexible adjustment of heating system parameters. It also makes it possible to connect heated floors to the system.

The radial wiring diagram is actively used in modern homes. The supply and return pipes here can be laid in any way - most often they go in the floors, after which they are suitable for one or another heating device. To regulate the temperature and turn on/off heating appliances, small distribution cabinets are installed in the house.

According to heating engineers, this scheme is ideal, since each heating device operates from its own mains and is almost independent of other heating devices.

Advantages and disadvantages of beam systems

There are many positive qualities:

  • the ability to completely hide all pipes in the walls and floors;
  • convenient system setup;
  • possibility of creating remote separate adjustment;
  • minimum number of connections - they are grouped in distribution cabinets;
  • it is convenient to repair individual elements without interrupting the operation of the entire system;
  • almost perfect heat distribution.


When installing a radiant heating system, all pipes are hidden in the floor, and the collectors are hidden in a special cabinet.

There are also a couple of disadvantages:

  • high cost of the system - this includes the costs of equipment and installation costs;
  • difficulty in implementing the scheme in an already built house - usually this scheme is laid out at the stage of creating a home ownership project .

If you still have to put up with the first drawback, then there is no escape from the second.

Features of installation of radiant heating systems

At the project creation stage, niches are provided for laying heating pipes, and installation points for distribution cabinets are indicated. At a certain stage of construction, pipes are laid, cabinets with collectors are installed, heating devices and boilers are installed, a test run of the system is carried out and it is checked for leaks. It is best to entrust all this work to professionals, since this scheme is the most complex.

Despite its complexity, a radiant heating system with collectors is one of the most convenient and efficient. It is used not only in private homes, but also in other buildings, for example, in offices.

Zoning

Thanks to the thoughtful distribution of thermal energy, you can not only create a comfortable atmosphere in your home, but also significantly save money.

List of recommended temperatures for different rooms:

  • Average level of comfortable temperature: + 20-24 degrees.
  • It is advisable to increase the temperature level in the bedroom slightly to + 22-25 degrees.
  • The bathroom, toilet, living room and other rooms where apartment residents visit most often should be heated within the range of + 21 to + 24 degrees.
  • In the dining room, kitchen and office, the temperature is reduced to +18-22 degrees.
  • The hallway, garage and passage rooms should be heated within + 12 degrees.

With forced and natural circulation

All the schemes presented above can be created on the basis of heating boilers of any type. For example, a stove heating scheme for a private house is built on the basis of a wood or coal stove, and pipe routing can be carried out according to almost any of the schemes described above. True, it would not hurt to add forced circulation to many of them. What is it for?


The main difference between a system with forced circulation of coolant and a system with natural circulation is the circulation pump.

As we remember, single-pipe heating systems are characterized by a decrease in coolant temperature as it moves away from the boiler - part of the heat remains in the radiators. These losses are partially compensated by the Leningradka scheme, but in some cases this is not enough. In order to correct the situation, a circulation pump is installed in the heating system, providing forced circulation of the coolant .

Forced circulation is also necessary in many other schemes, including two-pipe ones. The thing is that the small diameter of modern polypropylene pipes, numerous connections and turns create hydraulic resistance. In addition, the use of forced ventilation allows for faster heating of households.

Advantages and disadvantages of forced and natural circulation

Each system has its own advantages and disadvantages:


When heating a room with a large number of radiators, a circulation pump is simply necessary.

  • natural circulation is simpler and cheaper - there are no costs for circulation pumps;
  • forced circulation makes it possible to improve heating performance in large buildings - in some cases you can get by with natural circulation, but then the system warm-up time increases;
  • forced circulation is characterized by a slight hum – natural circulation is completely silent.

That is, everything has its advantages and disadvantages.

Selecting the right equipment

The boiler equipment market is replete with a sufficient range of various modifications. Even combined models have been developed that run on two types of fuel (for example, gas plus wood). So there are usually no problems with choosing the appropriate option. Of course, you have to shell out a tidy sum for an automatic or hybrid boiler, but the investment is fully recouped due to their high efficiency and versatility.

It is impossible to say unequivocally that some model is better and some is worse. You need to buy a device whose characteristics will best suit the operating conditions. In this case, it is advisable to make a choice towards the least expensive models. In areas where firewood is freely available, it is advisable to install wood-burning boilers. If there is a gas main nearby, choose gas models. In areas where there are interruptions in the supply of main fuel, it is advisable to acquire a combined heating boiler.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]